mwganson
commented
1 year ago Because of the way the threads are made using this workbench I haven't been able to come up with a way to do tapered threads. You can think of the thread profile object as basically spinning as it rises straight up and leaving a solid behind. The pitch of the helix is telling it how many spins to make per millimeter of rise. You would need to scale the profile smaller as it spins to get a taper. The underlying FreeCAD Sweep (Part WB) and Additive/Subtractive Pipe (PartDesign WB) tools, which the workbench uses, don't support that type of scaling. You can use a tapered helix in the traditional way of making threads, which is sweeping a profile (typically a triangle) along a helix, to achieve a tapered thread.
pitch-circle
Is it possible to add support for NPT or other tapered threads (e.g. BSP)? I was not sure if it was possible for the current code to deal with a tapered thread/helix, such as passing the thread taper off to the helix as an angle, or if they had to be built manually. The thread taper angle for all NPT is constant across all sizes so it could be defined as a fixed parameter. I was starting to build my own using the Part Helix command based upon data at this link: https://www.machiningdoctor.com/charts/thread-npt-charts/. However, it would be very useful if some of these were available as presets. Thank you.