Open pppier opened 6 years ago
I would love to see that too :)
That would be cool. As a workaround today, you can trigger the DAC sequencer as a start / stop signal (High, Low) to mute another channel.
Pretty sure development has ceased with the TU, but would also enjoy having a way to start/stop/reset the TU sequencer so it can follow an external sequencer and keep the entire rack in sync with that external source.
Hi David,
we are developing the software for the O_C or T_U but both are community projects So the code is open source and everyone can build upon it. Then again.. If you set Output 4 to DAC and the DAC to SEQ pus the clock to TR1 and reset to RST2 isn't that exactly what you are asking for You feed a clock signal into TR1 to drive it forward and a second signal to TR2 to reset it. If the first clock is absent it will just stop.
best Sascha
On Sun, Feb 4, 2024 at 5:24 PM David M. Schulman @.***> wrote:
Pretty sure development has ceased with the TU, but would also enjoy having a way to start/stop/reset the TU sequencer so it can follow an external sequencer and keep the entire rack in sync with that external source.
— Reply to this email directly, view it on GitHub https://github.com/mxmxmx/temps_utile-/issues/32#issuecomment-1925815554, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3NMMHCMZLOHWRIEBQ5WRTYR6Y2DAVCNFSM4EEHF2GKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCOJSGU4DCNJVGU2A . You are receiving this because you commented.Message ID: @.***>
-- -- kind regards / Viele Grüße Sascha Haber
http://northernlightmodular.com/ https://bit.ly/2No5sus - Modular Grid
+45 31585333 Copenhagen DK32950523
hi. thanx for your wonderful work. it's about TU mute settings and cv signals generated from midi start and stop signal. can the possibility of driving the mute option using a trigger be interesting, in Temps? (i think some midi module, (like befaco midi thing?) give a trigger as a start / stop signal, not a contiue value as doepfer do) :-)