Connection Failed using Controllino Hotspot

[Jbt8]

Hello, I am using a Controllino hotspot to run Mysterium node and It seemed to wok ok for a few days. Now it is showing "Connection failed". I have enabled PnP and disabled it. I have restarted my hotspot and no luck. I've also tried various settings, UPNP, Man, Punch through, etc....Please help. Thanks.

[etherunit]

@Jbt8 Thanks for opening this thread. Could you share us with your node identity?

[Jbt8]

Hello, I contacted Controllino regarding the "Connection Failed issue. They asked me if I had a static ip address for my device, which I do. I also port fwd to 44158. I also have NAT Traversal enabled and UPnP enabled as well. My current configuration is UPnP, holepuching, then Manual.

I was advised to contact you guys again and state that I need support for myst on a raspberry as indicated on the below cut/paste email from Controllino.

Okay, when you call myst support, ask for myst on a raspberry, not on a controllino.

Viele Grüße / Best regards Tobias

On Tue, Jun 14, 2022 at 2:19 PM etherunit @.***> wrote:

Currently, Mysterium Network has no official support to cover Controllino IoT gateway's Helium mining capabilities with node service. Research towards technical compatibility, configuration and more testing is required.

— Reply to this email directly, view it on GitHub https://github.com/mysteriumnetwork/node/issues/5195#issuecomment-1155108188, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZTN5G7EOLRLIAJF7JQPSF3VPB2EZANCNFSM5YXLXM2Q . You are receiving this because you authored the thread.Message ID: @.***>

[etherunit]

@Jbt8 Currently, our team is testing their solution and preparing a set of guides/troubleshooting KB for the users. Please follow our documentation page to find out more. https://docs.mysterium.network/