Open GoogleCodeExporter opened 9 years ago
Wan的IP指定不指定都试过了。·····用其他路由没这问题~~~~�
��在用rg100a~~~
没试过其他的固件~~~其他路由也刷不上napt66的固件····
Original comment by zxy...@gmail.com
on 18 Apr 2011 at 5:15
而且mentohust 的-k参数使用无效·····不能使mentohust退出···
root@OpenWrt:/# ./mentohust -uXXXXXX -XXXXXX -neth1.1 -i172.16.80.190 -m2
55.255.255.0 -g172.16.80.254 -s202.116.160.33 -o222.88.95.169 -t8 -e30 -r15 -a1
-d2 -b2 -v3.95 -l2 -cudhcpc -k
Welcome to MentoHUST Version: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list
>> 已发送退出信号给MentoHUST进程(PID=2207).
>> Quit。
root@OpenWrt:/# ./mentohust -uXXXXXX -XXXXXX -neth1.1 -i172.16.80.190 -m2
55.255.255.0 -g172.16.80.254 -s202.116.160.33 -o222.88.95.169 -t8 -e30 -r15 -a1
-d2 -b2 -v3.95 -l2 -cudhcpc -k
Welcome to MentoHUST Version: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list
>> 已发送退出信号给MentoHUST进程(PID=2207).
>> Quit。
root@OpenWrt:/# ./mentohust -uXXXXXX -XXXXXX -neth1.1 -i172.16.80.190 -m2
55.255.255.0 -g172.16.80.254 -s202.116.160.33 -o222.88.95.169 -t8 -e30 -r15 -a1
-d2 -b2 -v3.95 -l2 -cudhcpc -k
Welcome to MentoHUST Version: 0.3.1
Copyright (C) 2009-2010 HustMoon Studio
Bug report to http://code.google.com/p/mentohust/issues/list
>> 已发送退出信号给MentoHUST进程(PID=2207).
>> Quit。
无论输入多少次···还是一样···
Original comment by zxy...@gmail.com
on 18 Apr 2011 at 5:25
更正一下···不是完全的不能上····
因为每次不能使用-k参数退出,只能reboot或者通过web中system的
Process把mentohust T掉~~~
然后每次通过./mentohust进行拨号,在Sending
discover..出现后~~总有那么4、5秒可以上网~~~QQ网页全正常···�
�然后就又不行了····ping什么都不通(电脑和路由的ping都不
行)
qq也上不了~~~
Original comment by zxy...@gmail.com
on 18 Apr 2011 at 5:32
又发现一个···ping 1.1.1.1是通的··其他不通
通过浏览器也能进入1.1.1.1的界面·!!!
这啥问题啊。。。
Original comment by zxy...@gmail.com
on 18 Apr 2011 at 5:33
dhcp脚本应该是udhcpc -i eth1
Original comment by pentium....@gmail.com
on 19 Apr 2011 at 3:32
更正一下,是udhcpc -i eth1.1
Original comment by pentium....@gmail.com
on 19 Apr 2011 at 3:33
修改/etc/mentohust.conf DhcpScript=udhcpc -i eth1.1
Original comment by pentium....@gmail.com
on 19 Apr 2011 at 3:35
你好,北邮的网络是不用认证的,所以我不了解MentoHUST的情��
�。
udhcpc不能获得响应的原因可能有两种:1、在-i参数中指定了��
�误的网络接口;2、服务端绑定了MAC地址,而选定接口的MAC地
址与之不符。
在你述说的情况中,应该是MentoHUST调用了udhcpc,传递的参数��
�否有问题?你可以试试多开一个ssh,在其中另一个控制台通�
��802.1X认证后,在另一个控制台手动执行正确的udhcpc命令。
另外,你不妨透露所在学校,便于本校同学讨论。
谢谢你对NAPT66项目的关注!
Original comment by Mzwei...@gmail.com
on 19 Apr 2011 at 3:35
#5
但我在另一个OP的路由使用同样的拨号命令木有问题的啊~~~·
我现在没有用mentohust.conf作配置的~~~是直接在./mentohust
后面加一大堆的参数·~~
我等下改udhcpc -i eth1.1试试···
Original comment by zxy...@gmail.com
on 19 Apr 2011 at 6:43
还有我想问一下~~·如果是设置isatap隧道的话~~有没有必要mento
hust的拨号要在连接隧道之前呢?
Original comment by zxy...@gmail.com
on 19 Apr 2011 at 6:44
dhcp脚本也可以在命令行参数中指定:
mentohust '-cudhcpc -i eth1.1'
Original comment by www.eh...@gmail.com
on 21 Apr 2011 at 2:57
嘿嘿·~我的ipv6搞定了··谢谢
Original comment by zxy...@gmail.com
on 21 Apr 2011 at 3:34
Original issue reported on code.google.com by
zxy...@gmail.com
on 18 Apr 2011 at 5:12