请问编译出来的模块应该如何缩小体积？

mzweilin / napt66

Automatically exported from code.google.com/p/napt66

38 stars 12 forks source link

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago

编译出来的napt模块大小有700多kb，无法放进路由器使用，请��
�应如何解决？

Original issue reported on code.google.com by pentium....@gmail.com on 24 Sep 2011 at 1:27

Attachments:

GoogleCodeExporter commented 9 years ago

arch的mips目录下有一个makefile文件，打开后删除里面的-ggdb参��
�，再编译

Original comment by q741...@gmail.com on 24 Sep 2011 at 2:33

GoogleCodeExporter commented 9 years ago

在makefile中没有发现-ggdb参数？

Original comment by pentium....@gmail.com on 25 Sep 2011 at 2:49

Attachments:

GoogleCodeExporter commented 9 years ago

make内核模块的时候用make 
-n来显示详细编译指令，看看编译详细参数里有没有-ggdb，如�
��没有的话另想办法，如果有的话，找找看究竟在哪个文件里

Original comment by q741...@gmail.com on 25 Sep 2011 at 3:50

GoogleCodeExporter commented 9 years ago

编译成功后无法加载模块，显示can't insert 'napt66.ko":invalid 
module 
format，从网站上下载的已编译模块也是一样，请问应如何解��
�？

Original comment by pentium....@gmail.com on 25 Sep 2011 at 3:07

GoogleCodeExporter commented 9 years ago

invalid module 
format，是不是内核模块被strip过了，或者编译配置有问题

Original comment by q741...@gmail.com on 26 Sep 2011 at 4:30

GoogleCodeExporter commented 9 years ago

固件用的是从openwrt官网上下载的trunk固件

Original comment by pentium....@gmail.com on 26 Sep 2011 at 5:56

GoogleCodeExporter commented 9 years ago

用自己编译出来的试试

Original comment by q741...@gmail.com on 26 Sep 2011 at 11:31