Closed S52CQ closed 5 years ago
TR4W does not support this.
I checked the code and it looks like the RTS signaling is being turned off. But as a workaround for you, there is an option called PTT Via in the CTRL-J Config menu. If you set that, then TR will use the CAT command to enable PTT. I understand from the UHSDR team that is the preferred way to do PTT ( or at least how they do it in other log programs). Can you try that and see how it works?
Hi Tony,
I've just tried it - it does work, but only once. So at the power up it would not work, so I went to Setting/CAT & CW Keying>Radio 1. There I have settings: Keyer Radio One Output Port: COM3 Radio One Keyer RTS: PTT Radio One Keyer DTR: CW
I have "changed" Radio One Keyer RTS: from PTT to PTT, clicked Apply/OK and hit F9 (shortcut for ?) Radio was keyed correctly only once, next time it would do nothing. If I change Radio One Keyer RTS: PTT again then F9 is keyed correctly, but only once.
Does that report help at locating the problem?
73s de S52CQ, Jure
Did you see the PTT VIA command?
Tom
Principal Solutions Architect, ITIL®v3 Better Software Solutions, Inc. 727-437-BSS1 (727-437-2771) @BSSI_Consulting
On Jan 24, 2018, at 12:00 PM, S52CQ notifications@github.com wrote:
Hi Tony,
I've just tried it - it does work, but only once. So at the power up it would not work, so I went to Setting/CAT & CW Keying>Radio 1. There I have settings: Keyer Radio One Output Port: COM3 Radio One Keyer RTS: PTT Radio One Keyer DTR: CW
I have "changed" Radio One Keyer RTS: from PTT to PTT, clicked Apply/OK and hit F9 (shortcut for ?) Radio was keyed correctly only once, next time it would do nothing. If I change Radio One Keyer RTS: PTT again then F9 is keyed correctly, but only once.
Does that report help at locating the problem?
73s de S52CQ, Jure
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/n4af/TR4W/issues/290#issuecomment-360201727, or mute the thread https://github.com/notifications/unsubscribe-auth/AL07SoimA9X9JHR37PJep_w5Hnb1MeLUks5tN2GdgaJpZM4Qr_1g.
Yes, I've followed your instruction.
73 de S52CQ, Jure
On 24.1.2018 18:05, Tom Schaefer wrote:
Did you see the PTT VIA command?
Tom
Principal Solutions Architect, ITIL®v3 Better Software Solutions, Inc. 727-437-BSS1 (727-437-2771) @BSSI_Consulting
On Jan 24, 2018, at 12:00 PM, S52CQ notifications@github.com wrote:
Hi Tony,
I've just tried it - it does work, but only once. So at the power up it would not work, so I went to Setting/CAT & CW Keying>Radio 1. There I have settings: Keyer Radio One Output Port: COM3 Radio One Keyer RTS: PTT Radio One Keyer DTR: CW
I have "changed" Radio One Keyer RTS: from PTT to PTT, clicked Apply/OK and hit F9 (shortcut for ?) Radio was keyed correctly only once, next time it would do nothing. If I change Radio One Keyer RTS: PTT again then F9 is keyed correctly, but only once.
Does that report help at locating the problem?
73s de S52CQ, Jure
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/n4af/TR4W/issues/290#issuecomment-360201727, or mute the thread https://github.com/notifications/unsubscribe-auth/AL07SoimA9X9JHR37PJep_w5Hnb1MeLUks5tN2GdgaJpZM4Qr_1g.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/n4af/TR4W/issues/290#issuecomment-360203334, or mute the thread https://github.com/notifications/unsubscribe-auth/AQuBPl04vh49yrf8UG39apegX1PYkNBXks5tN2LFgaJpZM4Qr_1g.
OK. I asked as you gave me a summary of what you did, but I did not read any mention of setting PTT VIA. One last item…
set Radio One Keyer RTS: PTT to None instead of PTT. You are using a CAT command so RTS is not involved in this…
I have an FT-817 but as I am moving next week, I will have to revisit this the second week of February.
Tom Principal Solutions Architect, ITIL®v3 Better Software Solutions, Inc. 727-437-BSS1 (727-437-2771) @BSSI_Consulting
On Jan 24, 2018, at 4:29 PM, S52CQ notifications@github.com wrote:
Yes, I've followed your instruction.
73 de S52CQ, Jure
On 24.1.2018 18:05, Tom Schaefer wrote:
Did you see the PTT VIA command?
Tom
Principal Solutions Architect, ITIL®v3 Better Software Solutions, Inc. 727-437-BSS1 (727-437-2771) @BSSI_Consulting
On Jan 24, 2018, at 12:00 PM, S52CQ notifications@github.com wrote:
Hi Tony,
I've just tried it - it does work, but only once. So at the power up it would not work, so I went to Setting/CAT & CW Keying>Radio 1. There I have settings: Keyer Radio One Output Port: COM3 Radio One Keyer RTS: PTT Radio One Keyer DTR: CW
I have "changed" Radio One Keyer RTS: from PTT to PTT, clicked Apply/OK and hit F9 (shortcut for ?) Radio was keyed correctly only once, next time it would do nothing. If I change Radio One Keyer RTS: PTT again then F9 is keyed correctly, but only once.
Does that report help at locating the problem?
73s de S52CQ, Jure
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/n4af/TR4W/issues/290#issuecomment-360201727, or mute the thread https://github.com/notifications/unsubscribe-auth/AL07SoimA9X9JHR37PJep_w5Hnb1MeLUks5tN2GdgaJpZM4Qr_1g.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/n4af/TR4W/issues/290#issuecomment-360203334, or mute the thread https://github.com/notifications/unsubscribe-auth/AQuBPl04vh49yrf8UG39apegX1PYkNBXks5tN2LFgaJpZM4Qr_1g.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/n4af/TR4W/issues/290#issuecomment-360279567, or mute the thread https://github.com/notifications/unsubscribe-auth/AL07Slrnk3cXnREW-7_l3QeB7F9BIuRSks5tN6C9gaJpZM4Qr_1g.
Hi Tom,
I did set Radio One Keyer RTS: PTT to None instead of PTT. Then it just would not key the radio.
73s de Jure, S52CQ
Hi Tom,
any new update regarding this issue?
73s de Jure, S52CQ
closing per db4ple update: please test the newest binary. It should fix the RTS problem with TR4W and UHSDR. @ny4i: Mea culpa. It was our fault after all (in fact mine), everything in TR4W is working as it should. Please close the respective TR4W issue: n4af/TR4W#290 or have it closed.
73 Danilo
I am using open source mcHF radio which I am very pleased with.
It's software supports also CAT control, but authors of the SW have pointed out problem with TR4W. See the thread and description of the problem here:
https://github.com/df8oe/UHSDR/issues/1174
I am pleased with TR4W however I cannot use it if it does not fully function.
Can you please check the issue and see if TR4W can be upgraded?
73 de Jure, S52CQ