search

n4af / TR4W

TRLOG 4 Windows free amateur radio logging application
GNU General Public License v3.0
19 stars 6 forks source link

On at least the K4, when in Data mode, the display in TR4W states NONDIGI. #583

Closed ny4i closed 2 years ago

ny4i commented 2 years ago

I think I broke something. The radio states NONDIGI in DATA mode, NONCW in CW mode and NONSSB in SSB.

ny4i commented 2 years ago

The issue appears the BAND is not being set. Might be an issue calculating the band from the frequency.

But if I set the band with Band UP, then it knows the band so it appears in the code that gets the IF response and sets the radio band.

This is only when the program first comes up.

n4af commented 2 years ago

Tom - Would it make sense to label new branches as 'issue nnn' ?

ny4i commented 2 years ago

I used to do that but sometimes if the changes were small, I would put multiple in one issue.

But this one is an example of I only have the one fix to get it int he March release so that branch will be Issue583.

BTW, we can also prune some of the really old branches. We have every branch ever created I believe.

Tom Principal Solutions Architect Better Software Solutions, Inc. 727-437-2771

On Feb 22, 2022, at 6:44 AM, Howie Hoyt @.***> wrote:

Tom - Would it make sense to label new branches as 'issue nnn' ?

— Reply to this email directly, view it on GitHub https://github.com/n4af/TR4W/issues/583#issuecomment-1047712814, or unsubscribe https://github.com/notifications/unsubscribe-auth/AC6TWSW5USZXBQEUGZS4RHLU4NZLPANCNFSM5O75ALOA. You are receiving this because you were assigned.

ny4i commented 2 years ago

Well now I cannot duplicate this. I tried with the latest code in Delphi as well as the installed code in the latest install. Closing for now.

ok1rr commented 2 years ago

Hi,

there is a bug - when a preprogrammed message contains > (RIT clear) program 4.109.0 crashes.

73,

Martin, OK1RR

ok1rr commented 2 years ago

The last good one is 4.108.0.

The annoying bug appeared when the K4 was introduced.

73, Martin, OK1RR

Hi,

there is a bug - when a preprogrammed message contains > (RIT clear) program 4.109.0 crashes.

73,

Martin, OK1RR

ny4i commented 2 years ago

Are you connected via the network or serial cable?

Principal Solutions Architect Better Software Solutions, Inc. 727-437-2771

On Mar 5, 2022, at 8:22 AM, Martin Kratoska @.***> wrote:

 The last good one is 4.108.0.

The annoying bug appeared when the K4 was introduced.

73, Martin, OK1RR

Hi,

there is a bug - when a preprogrammed message contains > (RIT clear) program 4.109.0 crashes.

73,

Martin, OK1RR

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you modified the open/close state.

ok1rr commented 2 years ago

TR4W runs in Linux }no Windoze here).

Connections:

Network - while using TR4W. USB cable stays connected.

While using my logger (CQRlog) must use USB port (Hamlib 3.3) and K3 as radio type. Of course the network cable stays in its position.

73, Martin, OK1RR

P.S. Still don't know how to use the internal keyer for macros with KY command. How should I configure the keying (CW/PTT part, see tr4w-ctrl.png) and/or Winkeyer }assume that it must be disabled).

Dne 05. 03. 22 v 14:30 Tom Schaefer napsal(a):

Are you connected via the network or serial cable?

Principal Solutions Architect Better Software Solutions, Inc. 727-437-2771

On Mar 5, 2022, at 8:22 AM, Martin Kratoska @.***> wrote:

 The last good one is 4.108.0.

The annoying bug appeared when the K4 was introduced.

73, Martin, OK1RR

Hi,

there is a bug - when a preprogrammed message contains > (RIT clear) program 4.109.0 crashes.

73,

Martin, OK1RR

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you modified the open/close state.