search

n4af / TR4W

TRLOG 4 Windows free amateur radio logging application
GNU General Public License v3.0
19 stars 6 forks source link

On ADIF export, if there is an different operator field, include STATION_CALLSIGN #635

Closed ny4i closed 1 year ago

ny4i commented 1 year ago

LOTW needs to have a STATION_CALLSIGN field of the callsign used if there is an OPERATOR field. This would make it clearer too when exporting so add STATION_CALLSIGN to the ADIF export. I would just do it in all cases but I found this in WINTERFIELDDAY.

ok1rr commented 1 year ago

There is no visible TCP/IP parameter settings in the corresponding window. The settings can be copied from previous versions (settings -> tr4w.ini), all works fine. The [Radio] section may look like this:

[Radio] RADIO ONE TYPE=K4 RADIO ONE CONTROL PORT=TCP/IP KEYER RADIO ONE OUTPUT PORT=NONE RADIO ONE CAT RTS=OFF RADIO ONE CAT DTR=OFF RADIO ONE KEYER RTS=OFF RADIO ONE KEYER DTR=CW RADIO ONE BAUD RATE=38400 RADIO ONE NAME=K4 RADIO ONE IP ADDRESS=192.168.88.249 RADIO ONE TCP PORT=9200

An attempt to set up the parameters from the program results in situation as in actual-tcpip.jpg however it should be as in previous-tcpip.png.

73, Martin, OK1RR

ny4i commented 1 year ago

Sounds like a resource file issue on that build. What does this have to do with ADIF? OR did you hijack another issue to report this?TomPrincipal Solutions ArchitectBetter Software Solutions, Inc. 727-437-2771On Feb 11, 2023, at 7:13 AM, Martin Kratoska @.***> wrote: There is no visible TCP/IP parameter settings in the corresponding window. The settings can be copied from previous versions (settings -> tr4w.ini), all works fine. The [Radio] section may look like this:

[Radio] RADIO ONE TYPE=K4 RADIO ONE CONTROL PORT=TCP/IP KEYER RADIO ONE OUTPUT PORT=NONE RADIO ONE CAT RTS=OFF RADIO ONE CAT DTR=OFF RADIO ONE KEYER RTS=OFF RADIO ONE KEYER DTR=CW RADIO ONE BAUD RATE=38400 RADIO ONE NAME=K4 RADIO ONE IP ADDRESS=192.168.88.249 RADIO ONE TCP PORT=9200

An attempt to set up the parameters from the program results in situation as in actual-tcpip.jpg however it should be as in previous-tcpip.png.

73, Martin, OK1RR

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

ny4i commented 1 year ago

Please open a new issue to track this one. TomPrincipal Solutions ArchitectBetter Software Solutions, Inc. 727-437-2771On Feb 11, 2023, at 7:13 AM, Martin Kratoska @.***> wrote: There is no visible TCP/IP parameter settings in the corresponding window. The settings can be copied from previous versions (settings -> tr4w.ini), all works fine. The [Radio] section may look like this:

[Radio] RADIO ONE TYPE=K4 RADIO ONE CONTROL PORT=TCP/IP KEYER RADIO ONE OUTPUT PORT=NONE RADIO ONE CAT RTS=OFF RADIO ONE CAT DTR=OFF RADIO ONE KEYER RTS=OFF RADIO ONE KEYER DTR=CW RADIO ONE BAUD RATE=38400 RADIO ONE NAME=K4 RADIO ONE IP ADDRESS=192.168.88.249 RADIO ONE TCP PORT=9200

An attempt to set up the parameters from the program results in situation as in actual-tcpip.jpg however it should be as in previous-tcpip.png.

73, Martin, OK1RR

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

ok1rr commented 1 year ago

OMG...

This has nothing with Re: [n4af/TR4W] On ADIF export, if there is an different operator field, include STATION_CALLSIGN (Issue #635)

At least I have experience for next time. So I won't be reporting any more bugs...

Martin, OK1RR

Dne 11. 02. 23 v 13:41 Tom Schaefer napsal(a):

Sounds like a resource file issue on that build. What does this have to do with ADIF? OR did you hijack another issue to report this?TomPrincipal Solutions ArchitectBetter Software Solutions, Inc. 727-437-2771On Feb 11, 2023, at 7:13 AM, Martin Kratoska @.***> wrote: There is no visible TCP/IP parameter settings in the corresponding window. The settings can be copied from previous versions (settings -> tr4w.ini), all works fine. The [Radio] section may look like this:

[Radio] RADIO ONE TYPE=K4 RADIO ONE CONTROL PORT=TCP/IP KEYER RADIO ONE OUTPUT PORT=NONE RADIO ONE CAT RTS=OFF RADIO ONE CAT DTR=OFF RADIO ONE KEYER RTS=OFF RADIO ONE KEYER DTR=CW RADIO ONE BAUD RATE=38400 RADIO ONE NAME=K4 RADIO ONE IP ADDRESS=192.168.88.249 RADIO ONE TCP PORT=9200

An attempt to set up the parameters from the program results in situation as in actual-tcpip.jpg however it should be as in previous-tcpip.png.

73, Martin, OK1RR

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

ny4i commented 1 year ago

Just open another issue in GitHub. TomPrincipal Solutions ArchitectBetter Software Solutions, Inc. 727-437-2771On Feb 11, 2023, at 10:15 AM, Martin Kratoska @.***> wrote: OMG...

This has nothing with Re: [n4af/TR4W] On ADIF export, if there is an different operator field, include STATION_CALLSIGN (Issue #635)

At least I have experience for next time. So I won't be reporting any more bugs...

Martin, OK1RR

Dne 11. 02. 23 v 13:41 Tom Schaefer napsal(a):

Sounds like a resource file issue on that build. What does this have to do with ADIF? OR did you hijack another issue to report this?TomPrincipal Solutions ArchitectBetter Software Solutions, Inc. 727-437-2771On Feb 11, 2023, at 7:13 AM, Martin Kratoska @.***> wrote: There is no visible TCP/IP parameter settings in the corresponding window. The settings can be copied from previous versions (settings -> tr4w.ini), all works fine. The [Radio] section may look like this:

[Radio] RADIO ONE TYPE=K4 RADIO ONE CONTROL PORT=TCP/IP KEYER RADIO ONE OUTPUT PORT=NONE RADIO ONE CAT RTS=OFF RADIO ONE CAT DTR=OFF RADIO ONE KEYER RTS=OFF RADIO ONE KEYER DTR=CW RADIO ONE BAUD RATE=38400 RADIO ONE NAME=K4 RADIO ONE IP ADDRESS=192.168.88.249 RADIO ONE TCP PORT=9200

An attempt to set up the parameters from the program results in situation as in actual-tcpip.jpg however it should be as in previous-tcpip.png.

73, Martin, OK1RR

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>