I dont understand, I cant get anything to work. I have tried many different setups. Arduino UNO, Arduino Nano, Arduino Mega, all have the same result: silence...
Im using the GettingStarted sketch.
I know the Radios are hooked up good because I get real results on radio.printDetails():
Is there some trick to RF24Audio rfAudio(radio,0)?
Do I set one to 0 and one to 1? Ive tried every combo: Both on 0, Both on 1, one on 0, one on 1. Nothing...
I set one to "transmit" by sending an "r" on the serial monitor, and the other to "receive" by sending an "s" on the serial monitor, and just nothing happens. evrrything is dead. No LED activity, no sound, nothing...
I dont understand, I cant get anything to work. I have tried many different setups. Arduino UNO, Arduino Nano, Arduino Mega, all have the same result: silence...
Im using the GettingStarted sketch.
I know the Radios are hooked up good because I get real results on radio.printDetails():
SPI Speedz = 10 Mhz STATUS = 0x0e RX_DR=0 TX_DS=0 MAX_RT=0 RX_P_NO=7 TX_FULL=0 RX_ADDR_P0-1 = 0x544d52687c 0xabcdabcd71 RX_ADDR_P2-5 = 0x32 0xc4 0xc5 0xc6 TX_ADDR = 0x544d52687c RX_PW_P0-6 = 0x20 0x20 0x20 0x20 0x20 0x20 EN_AA = 0x3f EN_RXADDR = 0x03 RF_CH = 0x4c RF_SETUP = 0x07 CONFIG = 0x0e DYNPD/FEATURE = 0x00 0x00 Data Rate = 1 MBPS Model = nRF24L01+ CRC Length = 16 bits PA Power = PA_MAX ARC = 0
Is there some trick to RF24Audio rfAudio(radio,0)?
Do I set one to 0 and one to 1? Ive tried every combo: Both on 0, Both on 1, one on 0, one on 1. Nothing...
I set one to "transmit" by sending an "r" on the serial monitor, and the other to "receive" by sending an "s" on the serial monitor, and just nothing happens. evrrything is dead. No LED activity, no sound, nothing...
Please help!