Lora failed

[samsamxu]

Dear Nakhonthai, I flashed the esp32s3 and mod the lora, the lora Init success, but when sending message, it shows [LoRa] Failed, code -24. Please check the code as follows: ` [1017000][D][main.cpp:4061] loop(): Free heap: 198.0 KB WiFi:Mate 60 Pro ,RSSI:-50 dBm [1022470][D][LibAPRS.cpp:183] APRS_init(): [SX12xx] Initializing .. [1022470][D][LibAPRS.cpp:186] APRS_init(): Init chip SX1278 [1022471][D][LibAPRS.cpp:261] APRS_init(): [9] Begin... [1022489][D][LibAPRS.cpp:269] APRS_init(): [LoRa] Init success! [1022490][D][LibAPRS.cpp:283] APRS_init(): [LoRa] Start receive success! Client reconnected! Last message ID that it got is: 732458 [1027005][D][main.cpp:4060] loop(): Task process APRS=40uS NETWORK=4080uS GPS=17uS SERIAL=0uS TempCPU=0.00

[1027006][D][main.cpp:4061] loop(): Free heap: 195.1 KB WiFi:Mate 60 Pro ,RSSI:-45 dBm [1037007][D][main.cpp:4060] loop(): Task process APRS=53uS NETWORK=4147uS GPS=27uS SERIAL=0uS TempCPU=0.00

[1037008][D][main.cpp:4061] loop(): Free heap: 195.1 KB WiFi:Mate 60 Pro ,RSSI:-40 dBm [1047008][D][main.cpp:4060] loop(): Task process APRS=28uS NETWORK=4078uS GPS=14uS SERIAL=0uS TempCPU=0.00

[1047009][D][main.cpp:4061] loop(): Free heap: 195.8 KB WiFi:Mate 60 Pro ,RSSI:-34 dBm [1057009][D][main.cpp:4060] loop(): Task process APRS=37uS NETWORK=4075uS GPS=13uS SERIAL=0uS TempCPU=0.00

[1057010][D][main.cpp:4061] loop(): Free heap: 195.8 KB WiFi:Mate 60 Pro ,RSSI:-49 dBm [1067010][D][main.cpp:4060] loop(): Task process APRS=40uS NETWORK=4080uS GPS=12uS SERIAL=0uS TempCPU=0.00

[1067011][D][main.cpp:4061] loop(): Free heap: 195.8 KB WiFi:Mate 60 Pro ,RSSI:-67 dBm [1076547][D][main.cpp:5744] taskAPRS(): TRACKER RAW: BI9BCQ-7>APE32L-2:> ?RSSI TRACKER MODE

[1076548][D][main.cpp:5745] taskAPRS(): TRACKER EVENT_TX_POSITION=4 INTERVAL=60

[1076562][D][main.cpp:2630] pkgTxSend(): TX->RF: BI9BCQ-7>APE32L-2:> ?RSSI TRACKER MODE [1077676][D][main.cpp:4060] loop(): Task process APRS=601uS NETWORK=4071uS GPS=16uS SERIAL=0uS TempCPU=0.00

[1077677][D][main.cpp:4061] loop(): Free heap: 195.5 KB WiFi:Mate 60 Pro ,RSSI:-74 dBm [1079536][D][LibAPRS.cpp:122] radioRecvStatus(): [LoRa] RSSI:-164 dBm SNR:0 dBm FreqErr:0 Hz [1079537][D][LibAPRS.cpp:313] APRS_poll(): [LoRa] Received packet! 0 Byte

[1079541][D][LibAPRS.cpp:362] APRS_poll(): [LoRa] Failed, code -24 Client reconnected! Last message ID that it got is: 1025428 [1087677][D][main.cpp:4060] loop(): Task process APRS=30uS NETWORK=4076uS GPS=17uS SERIAL=0uS TempCPU=0.00`

[nakhonthai]

Received error from noise. radioRecvStatus(): [LoRa] RSSI:-164 dBm SNR:0 dBm FreqErr:0 Hz [LoRa] Received packet! 0 Byte

[samsamxu]

Thank you, I reconnect the wires, it works. By the way, how to connect the 4G LTE? I can not find where and how to connect this LTE modem