search

nakhonthai / ESP32APRS_T-TWR

APRS Software project device support LILYGO T-TWR Plus.
GNU General Public License v3.0
117 stars 18 forks source link

Audio out - Disable ? #35

Closed banshee1971 closed 7 months ago

banshee1971 commented 7 months ago

Been able to disable the speaker, would be nice.

lyusupov commented 7 months ago

Muting SA868 volume level down to 0 will cost you to no receive APRS at all.

Just unplug the speaker connector (black and red wires) if it hurts.

VK1MIC commented 7 months ago

I’ve not been able to get the open to receive anything anyway

Wade Smith m: +61403956763 w: wadeabout.com e: @.***

On Mon, 15 Apr 2024 at 13:32, Linar Yusupov @.***> wrote:

Muting SA868 volume level down to 0 will cost you to no receive APRS at all.

Just unplug speaker connector (black and red wires) if it hurts.

— Reply to this email directly, view it on GitHub https://github.com/nakhonthai/ESP32APRS_T-TWR/issues/35#issuecomment-2054730993, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADHVQGQYENVLMGKXX7WQOV3Y5NC4TAVCNFSM6AAAAABGGJ2KQOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJUG4ZTAOJZGM . You are receiving this because you are subscribed to this thread.Message ID: @.***>

lyusupov commented 7 months ago

not been able to get the open to receive

I can see from the ESP32APRS_T-TWR source code that implementation of APRS receive function with Open Edition firmware is incomplete. IMHO, it was a premature decision to make it a part of the recent release.

APRS receive with NiceRF firmware works more or less fine to me.

banshee1971 commented 7 months ago

Muting SA868 volume level down to 0 will cost you to no receive APRS at all.

Just unplug the speaker connector (black and red wires) if it hurts.

I just did that :) As i put my device in my backyard cabin.. i want to avoid some neighboor complain about the noise (as i can't ear it anyway)

lyusupov commented 7 months ago

@banshee1971

image