Closed georgebangeboss closed 2 years ago
The PCB is microstrip.
As for the substrate:
As per now we'll fabricate the antenna ourselves.
L1_1 and RF nets should be 0.29337mm trace width to achieve 50 Ohm controlled impedance
11.55 mil is equivalent to 0.29337mm
The impedance matching circuits are perfect. What is left is adjusting the widths of RF tracks to achieve controlled track impedance of 50 Ohms. Is the PCB coplanar or microstrip? What substrate material is being used? FR4? Those are used to calculate the correct track width
The 10 uF Bypass capacitor should be as close as possible to the VCC pin of LNA(AT2659) which seems okay visually
Will the shipped PCB come with the GPS antenna?