Hi everyone,
it's been about 2 months I mine with Claymore, actually I mine only Ethereum. I know that right now, it's not the best time for making money because of the low crypto value, and I'm getting very low profits. But I try actually to have the best optimal performance for my 3 AMD RX 580 8gb OC cards. Actually, I'm getting on average 95MH/s for all cards, sometimes it will fluctuate from 34MH to 221MH. I have tried a lot of parameters since, the ccclock, the cvddc, the mclock etc.... I want to get the most of it but not sure. Here are my actual parameters:
cclock 1150
cvddc 950
mclock 2150
With these my pc is running at 480 watts. I would want also to decrease the watts, I want the best profits but at the lowest electricity cost. The electricy is costing me 0.09 kw/h... expensive
I've tried also the -dcri, -ethi parameters but they don't seems to improve at all my total hashrate...
One other detail: I have overclocked my 3 cards, so in the Claymore console, we can see about "93mh/s" for the total, and about 31mh/s per card (instead of 25mh before overclock). Do overcloak is really helping me in my case?
Any advice on my setup? Perhaps there is someone who have similar configuration (same 580 cards)
Hi everyone, it's been about 2 months I mine with Claymore, actually I mine only Ethereum. I know that right now, it's not the best time for making money because of the low crypto value, and I'm getting very low profits. But I try actually to have the best optimal performance for my 3 AMD RX 580 8gb OC cards. Actually, I'm getting on average 95MH/s for all cards, sometimes it will fluctuate from 34MH to 221MH. I have tried a lot of parameters since, the ccclock, the cvddc, the mclock etc.... I want to get the most of it but not sure. Here are my actual parameters:
cclock 1150 cvddc 950 mclock 2150
With these my pc is running at 480 watts. I would want also to decrease the watts, I want the best profits but at the lowest electricity cost. The electricy is costing me 0.09 kw/h... expensive
I've tried also the -dcri, -ethi parameters but they don't seems to improve at all my total hashrate...
One other detail: I have overclocked my 3 cards, so in the Claymore console, we can see about "93mh/s" for the total, and about 31mh/s per card (instead of 25mh before overclock). Do overcloak is really helping me in my case?
Any advice on my setup? Perhaps there is someone who have similar configuration (same 580 cards)
thank you !