search

nanopool / nanominer

Nanominer is a versatile tool for mining cryptocurrencies on GPUs and CPUs.
https://nanominer.org
636 stars 348 forks source link

<warning> GPU 0 hung up. Try to decrease the "memTweak" parameter value for GPU 0 #138

Open ImAccia opened 3 years ago

ImAccia commented 3 years ago

I'm using the cuda 11 build of the miner with an NVIDIA 2060 Super, but i'm still getting this error, and the console keeps on restarting. Any help?

sandeep245 commented 3 years ago

same Problem, GPU 0 hung up. Try to decrease the "memTweak" parameter value for GPU 0,
5 card is running good but 6th card is 0.00 hs. Please help me.

sandeep245 commented 3 years ago

same Problem, GPU 0 hung up. Try to decrease the "memTweak" parameter value for GPU 0,
GPU 2 hung up. Try to decrease the "memTweak" parameter value for GPU 2 Miner has not been restarted before GPU 4 hung up. Try to decrease the "memTweak" parameter value for GPU 4 Miner has not been restarted before 5 card is running good but 6th card is 0.00 hs. Please help me.

ImAccia commented 3 years ago

I managed to fix the problem by setting the GPU fans speed to 100% all the time using MSI Afterburn, i had noticed that the fans and temps were getting lower before restarting. Try doung that

sandeep245 commented 3 years ago

I managed to fix the problem by setting the GPU fans speed to 100% all the time using MSI Afterburn, i had noticed that the fans and temps were getting lower before restarting. Try doung that

please help, how to solve - please tell full procedure. . please bro.

Grumpy-Dwarf commented 3 years ago

Please try running with default clock settings. This error can mean any sort of hardware-related issue - overclocking too much, insufficient power, bad risers, etc.

coolrip007 commented 2 years ago

"memTweak" Parmeter value for GPU! now 3 amd 6600xt crashing

coolrip007 commented 2 years ago

all happin after this full lhr unlock stuff