[v3.3.9] Autolykos performance worse than the previous version

[bergi9]

I'm using GTX970 which has a constant hashrate of 37-37.8MH/s on autolykos on version 3.3.8. After it got updated to 3.3.9 the performance got down to 24.7MH/s. Reverting the update the hashrate went back.

[jamez774]

Having similar issues with eth. Hash rate is severely reduced since the update. I am also getting short hashrate spikes, Rtx 3070 was always steady at 60m/h. Now see spike on them to over 70 but calculated h/r is very low. Also the fanSpeed command doesn’t seem to work.

Including a picture. You can see the steady rate before update and the mess after.

[jekjek]

This version not good. Stay away from it

[jekjek]

3.3.8 workded flawlessly for weeks. after upgrade my card has started to behave weirdely, not sure if its even damaged. Stay away from it.

[saki8b]

3.3.8 workded flawlessly for weeks. after upgrade my card has started to behave weirdely, not sure if its even damaged. Stay away from it.

Is it possible that its also giving problem to Eth too... my hashrate went way up and down... its not stable. But other miners are fine. what causing it ?

[bonastreyair]

have you tried with recent release v3.3.10?

[saki8b]

For Eth yes I also shared a Log. The result is same. Only 3.3.8 is stable.

From: Yair @.> Sent: Friday, September 17, 2021 1:18 AM To: @.> Cc: @.>; @.> Subject: Re: [nanopool/nanominer] [v3.3.9] Autolykos performance worse than the previous version (#275)

have you tried with recent release v3.3.10?

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/nanopool/nanominer/issues/275#issuecomment-921178943, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AGQXUDWNR7IPLJP2XGSBDODUCI7GNANCNFSM5DY6CLMQ. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

[bergi9]

v3.3.10 didn't fix the performance issue. I'm still on 3.3.8.

[saki8b]

No…

From: @.> Sent: Thursday, September 16, 2021 12:23 PM To: @.> Cc: @.>; @.> Subject: Re: [nanopool/nanominer] [v3.3.9] Autolykos performance worse than the previous version (#275)

v3.3.10 didn't fix the performance issue. I'm still on 3.3.8.

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/nanopool/nanominer/issues/275#issuecomment-921182445, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AGQXUDUFVSRJZH4AUQS4UKDUCI74DANCNFSM5DY6CLMQ. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.