Counterflow diffusion flames: Solver warnings

[GoogleCodeExporter]

I implemented a few warnings that check if the solution of a counterflow 
diffusion flame is reasonable.

I hope that you find them useful.

Original issue reported on code.google.com by thetruet...@googlemail.com on 7 Aug 2014 at 1:30

Attachments:

• patch_diffusion_flame_solver_warnings.diff

[GoogleCodeExporter]

Shouldn't the warning about flame width suggest *increasing* the inlet mass 
fluxes?

Original comment by yarmond on 29 Aug 2014 at 4:08

• Changed state: InProgress
• Removed labels: OpSys-Linux

[GoogleCodeExporter]

Oh, yes this is definitively true. Thank you!
I attached a modified patch correcting this.

I also exchanged the sentence 'Consider decreasing the ratio of the oxidizer 
inlet mass flux to the fuel inlet mass flux' to 'Consider *increasing* the 
ratio of the *fuel* inlet mass flux to the *oxidizer* inlet mass flux'. I hope 
that this helps to not drive people into the first warning if the fuel peak is 
close to a boundary.

Original comment by thetruet...@googlemail.com on 29 Aug 2014 at 9:53

Attachments:

• patch_diffusion_flame_solver_warnings.diff

[GoogleCodeExporter]

This issue was closed by revision r3134.

Original comment by yarmond on 2 Sep 2014 at 10:34

• Changed state: Fixed