Open fabiangl opened 7 years ago
Stay tuned for more improvements.
Thank you.
Hi Nassir i have a problem,and i would like to ask some questions,i made everything as posted and i get :Command is not recognized! Sending response back i would like to mention that im using a weemos d1mini v2 and i changed the pin number and i have no clue what i´m makeing wrong. whould you like to give me some clues? Thanks very much for your time reading this:)
Command is not recognized is just a place holder. Ignore it if you did not issue any commands. I you issue a voice command and you get this message the there is an issue.
Nassir
On Thu, Oct 19, 2017 at 7:52 PM, h3xtr3m notifications@github.com wrote:
Hi Nassir i have a problem,and i would like to ask some questions,i made everything as posted and i get :Command is not recognized! Sending response back i would like to mention that im using a weemos d1mini v2 and i changed the pin number and i have no clue what i´m makeing wrong. whould you like to give me some clues? Thanks very much for your time reading this:)
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/nassir-malik/IFTTT-Alexa-And-GoogleHome-Control-Single-Device/issues/1#issuecomment-338076801, or mute the thread https://github.com/notifications/unsubscribe-auth/AL1FGSyx7XIUtD_Zp_3wzi6dFtIOEsjNks5st-7ogaJpZM4O-wXj .
Hi Nassir, great job. I tested and works good. Can you add to the Http server and Websocket server Authoritation, to make secure and private the login to both servers.