search

nathalislight / NCAT

NESCAT IS BACK LIKE NCAT PROJECT...
Other
181 stars 66 forks source link

Problems using SD card #14

Open scanlight opened 11 months ago

scanlight commented 11 months ago

Can compile for the esp32 wrover

but cant use the SD card E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1091) gpio: gpio_set_level(226): GPIO output gpio_num error E (1132) gpio: gpio_set_level(226): GPIO output gpio_num error

scanlight commented 11 months ago

Full error after reboot.

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13964 load:0x40080400,len:3600 entry 0x400805f0 E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1091) gpio: gpio_set_level(226): GPIO output gpio_num error E (1132) gpio: gpio_set_level(226): GPIO output gpio_num error SD error! Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.

gad969 commented 8 months ago

Full error after reboot.

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13964 load:0x40080400,len:3600 entry 0x400805f0 E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1085) gpio: gpio_set_level(226): GPIO output gpio_num error E (1091) gpio: gpio_set_level(226): GPIO output gpio_num error E (1132) gpio: gpio_set_level(226): GPIO output gpio_num error SD error! Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.

I have same problem. Did you solve it?

scanlight commented 8 months ago

No never got it to work. Sadly

gad969 commented 8 months ago

No never got it to work. Sadly

I try old version of nescat yesterday and it works. https://github.com/markoni985/NesCat It use other pins for sdcard module