I tried to use the command but it says "no such option: -q". This command actually exist in the --help. I can't make a selection of quality for the albums I wanted to rip.
Previously on V1.9.7, I used this command:
rip url --max-quality 2 {album-links}
Command Used
C:\Users\User>rip url -q 2 {album-links}
Usage: rip url [OPTIONS] URLS...
Try 'rip url --help' for help.
Error: No such option: -q
Debug Traceback
Unable to use the -vvv command because it says there is no such option.
Config File
[downloads]
# Folder where tracks are downloaded to
folder = "C:\\Users\\User\\StreamripDownloads"
# Put Qobuz albums in a 'Qobuz' folder, Tidal albums in 'Tidal' etc.
source_subdirectories = true
# Download (and convert) tracks all at once, instead of sequentially.
# If you are converting the tracks, or have fast internet, this will
# substantially improve processing speed.
concurrency = true
# The maximum number of tracks to download at once
# If you have very fast internet, you will benefit from a higher value,
# A value that is too high for your bandwidth may cause slowdowns
# Set to -1 for no limit
max_connections = -1
# Max number of API requests per source to handle per minute
# Set to -1 for no limit
requests_per_minute = 60
[qobuz]
# 1: 320kbps MP3, 2: 16/44.1, 3: 24/<=96, 4: 24/>=96
quality = 3
# This will download booklet pdfs that are included with some albums
download_booklets = true
# Authenticate to Qobuz using auth token? Value can be true/false only
use_auth_token = false
# Enter your userid if the above use_auth_token is set to true, else enter your email
email_or_userid = ""
# Enter your auth token if the above use_auth_token is set to true, else enter the md5 hash of your plaintext password
password_or_token = ""
# Do not change
app_id = "950096963"
# Do not change
secrets = ["", ""]
[tidal]
# 0: 256kbps AAC, 1: 320kbps AAC, 2: 16/44.1 "HiFi" FLAC, 3: 24/44.1 "MQA" FLAC
quality = 3
# This will download videos included in Video Albums.
download_videos = true
# Do not change any of the fields below
user_id = ""
country_code = ""
access_token = ""
refresh_token = ""
# Tokens last 1 week after refresh. This is the Unix timestamp of the expiration
# time. If you haven't used streamrip in more than a week, you may have to log
# in again using `rip config --tidal`
token_expiry = ""
[deezer]
# 0, 1, or 2
# This only applies to paid Deezer subscriptions. Those using deezloader
# are automatically limited to quality = 1
quality = 2
# An authentication cookie that allows streamrip to use your Deezer account
# See https://github.com/nathom/streamrip/wiki/Finding-Your-Deezer-ARL-Cookie
# for instructions on how to find this
arl = ""
# This allows for free 320kbps MP3 downloads from Deezer
# If an arl is provided, deezloader is never used
use_deezloader = true
# This warns you when the paid deezer account is not logged in and rip falls
# back to deezloader, which is unreliable
deezloader_warnings = true
[soundcloud]
# Only 0 is available for now
quality = 0
# This changes periodically, so it needs to be updated
client_id = ""
app_version = ""
[youtube]
# Only 0 is available for now
quality = 0
# Download the video along with the audio
download_videos = false
# The path to download the videos to
video_downloads_folder = "C:\\Users\\User\\StreamripDownloads\\YouTubeVideos"
[database]
# Create a database that contains all the track IDs downloaded so far
# Any time a track logged in the database is requested, it is skipped
# This can be disabled temporarily with the --no-db flag
downloads_enabled = true
# Path to the downloads database
downloads_path = "C:\\Users\\User\\AppData\\Roaming\\streamrip\\downloads.db"
# If a download fails, the item ID is stored here. Then, `rip repair` can be
# called to retry the downloads
failed_downloads_enabled = true
failed_downloads_path = "C:\\Users\\User\\AppData\\Roaming\\streamrip\\failed_downloads.db"
# Convert tracks to a codec after downloading them.
[conversion]
enabled = false
# FLAC, ALAC, OPUS, MP3, VORBIS, or AAC
codec = "ALAC"
# In Hz. Tracks are downsampled if their sampling rate is greater than this.
# Value of 48000 is recommended to maximize quality and minimize space
sampling_rate = 48000
# Only 16 and 24 are available. It is only applied when the bit depth is higher
# than this value.
bit_depth = 24
# Only applicable for lossy codecs
lossy_bitrate = 320
# Filter a Qobuz artist's discography. Set to 'true' to turn on a filter.
# This will also be applied to other sources, but is not guaranteed to work correctly
[qobuz_filters]
# Remove Collectors Editions, live recordings, etc.
extras = false
# Picks the highest quality out of albums with identical titles.
repeats = false
# Remove EPs and Singles
non_albums = false
# Remove albums whose artist is not the one requested
features = false
# Skip non studio albums
non_studio_albums = false
# Only download remastered albums
non_remaster = false
[artwork]
# Write the image to the audio file
embed = true
# The size of the artwork to embed. Options: thumbnail, small, large, original.
# "original" images can be up to 30MB, and may fail embedding.
# Using "large" is recommended.
embed_size = "large"
# If this is set to a value > 0, max(width, height) of the embedded art will be set to this value in pixels
# Proportions of the image will remain the same
embed_max_width = -1
# Save the cover image at the highest quality as a seperate jpg file
save_artwork = true
# If this is set to a value > 0, max(width, height) of the saved art will be set to this value in pixels
# Proportions of the image will remain the same
saved_max_width = -1
[metadata]
# Sets the value of the 'ALBUM' field in the metadata to the playlist's name.
# This is useful if your music library software organizes tracks based on album name.
set_playlist_to_album = true
# If part of a playlist, sets the `tracknumber` field in the metadata to the track's
# position in the playlist instead of its position in its album
renumber_playlist_tracks = true
# The following metadata tags won't be applied
# See https://github.com/nathom/streamrip/wiki/Metadata-Tag-Names for more info
exclude = []
# Changes the folder and file names generated by streamrip.
[filepaths]
# Create folders for single tracks within the downloads directory using the folder_format
# template
add_singles_to_folder = false
# Available keys: "albumartist", "title", "year", "bit_depth", "sampling_rate",
# "id", and "albumcomposer"
folder_format = "{albumartist} - {title} ({year}) [{container}] [{bit_depth}B-{sampling_rate}kHz]"
# Available keys: "tracknumber", "artist", "albumartist", "composer", "title",
# and "albumcomposer", "explicit"
track_format = "{tracknumber}. {artist} - {title}{explicit}"
# Only allow printable ASCII characters in filenames.
restrict_characters = false
# Truncate the filename if it is greater than this number of characters
# Setting this to false may cause downloads to fail on some systems
truncate_to = 120
# Last.fm playlists are downloaded by searching for the titles of the tracks
[lastfm]
# The source on which to search for the tracks.
source = "qobuz"
# If no results were found with the primary source, the item is searched for
# on this one.
fallback_source = ""
[cli]
# Print "Downloading {Album name}" etc. to screen
text_output = true
# Show resolve, download progress bars
progress_bars = true
# The maximum number of search results to show in the interactive menu
max_search_results = 100
[misc]
# Metadata to identify this config file. Do not change.
version = "2.0"
Describe the bug
I tried to use the command but it says "no such option: -q". This command actually exist in the --help. I can't make a selection of quality for the albums I wanted to rip.
Previously on V1.9.7, I used this command:
rip url --max-quality 2 {album-links}
Command Used
Debug Traceback
Config File
Operating System
Windows 11
streamrip version
2.0.2
Screenshots and recordings
No response
Additional context
No response