Closed GoogleCodeExporter closed 9 years ago
Did you install PRSP earlier on another device?
Did you restart the reader at least twice?
Original comment by wpme.hofland
on 5 Nov 2012 at 6:51
Original comment by wpme.hofland
on 5 Nov 2012 at 6:55
I got it from eBay with 1.0 firmware installed, so I updated the firmware to
2.0. Since the original owner never bothered to do anything with the firmware.
I don't think PRSP has ever been installed. I did restarted the 950 several
times before and after the failed PRSP installations.
Original comment by gavin....@gmail.com
on 5 Nov 2012 at 7:07
BTW, I restarted the device with the push of the reset button, I've never
powered it off until now. Maybe resets are no good?
Original comment by gavin....@gmail.com
on 5 Nov 2012 at 7:10
Please try reinstalling and restarting the normal way various times.
During shutdown/restart, the installation is performed.
The windows script mainly copies the files to the reader. The real installation
is done during startup and the next reboot.
Original comment by wpme.hofland
on 5 Nov 2012 at 10:05
Repeated it on another Win 7 PC with the 2.1 Alpha version for 5 times and
got the same thing. maybe there is something I should do before running
setup.exe or something I shouldn't have done like updating the firmware to 2.0
from 1.0? Also, I noticed that the READER is mounted as E: drive and SETTINGS
as H drive. Yet setup.exe always tried to run the setup on the E drive,
shouldn't it be done on the H drive where SETTINGS is located?
Original comment by gavin....@gmail.com
on 10 Nov 2012 at 10:46
finally, I removed the pdf files I put into the internal memory and the
installation went on without a hitch. Before the removal, the 950 only had 45MB
left, I guess it's just not enough.
Original comment by gavin....@gmail.com
on 13 Nov 2012 at 3:39
Please close this case. Thank you for the help!
Original comment by gavin....@gmail.com
on 13 Nov 2012 at 3:40
Glad you worked it out,
closing this issue as requested.
Original comment by Mark.N...@gentlemansclub.de
on 13 Nov 2012 at 8:42
Original issue reported on code.google.com by
gavin....@gmail.com
on 5 Nov 2012 at 9:33