search

nav111 / heekscnc

Automatically exported from code.google.com/p/heekscnc
Other
0 stars 0 forks source link

Pocket function, it not work. #239

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?

1. Create an figure geometry with the sketch and after close the leads

2. After select the Pocket operation into window Object the menu Operation not 
show the sub-menu Pocket.

3. consequently  the function G0 not create the toolpath.

Thanks,
Palumbo Eugenio.

Original issue reported on code.google.com by b.ghiac...@gmail.com on 9 Aug 2010 at 1:05

GoogleCodeExporter commented 8 years ago 
Palumbo,

  I just created a pocket on a closed sketch and it seemed to work alright.  Dan Heeks made some changes to the pocketing operation and its use of the libArea project recently.  Is it possible that you need to re-fetch the latest libArea code, recompile and install it?  NOTE: The libArea code is not delivered with the HeeksCNC code.  It's held in a separate project.

  David Nicholls

Original comment by David.Ni...@gmail.com on 9 Aug 2010 at 1:14

GoogleCodeExporter commented 8 years ago 
Yes I before have compiled HeeksCAD, I have downloaded all source code for all 
lib and Programs HeeksCAD/CNC.

The problem has been manifested after to have update and compiled all.

Thanks,
Palumbo Eugenio.

Original comment by b.ghiac...@gmail.com on 9 Aug 2010 at 1:25

GoogleCodeExporter commented 8 years ago 
Is this with a Windows installation, or built from source code?
Do you mean the main menu ( at the top ), or a right-click menu?
Dan.

Original comment by danhe...@gmail.com on 9 Aug 2010 at 1:25

GoogleCodeExporter commented 8 years ago 
 I try again the procedure from scratch, download all sources HeeksCad/cnc and lib..

Original comment by b.ghiac...@gmail.com on 9 Aug 2010 at 1:28

GoogleCodeExporter commented 8 years ago 
Which operating system?

Original comment by danhe...@gmail.com on 9 Aug 2010 at 1:30

GoogleCodeExporter commented 8 years ago 
Gentoo

Original comment by b.ghiac...@gmail.com on 9 Aug 2010 at 1:31

GoogleCodeExporter commented 8 years ago 
Linux localhost 2.6.32.11-rtai-vulcano #2 SMP PREEMPT Tue Jul 20 00:22:11 CEST 
2010 i686 AMD Turion(tm) 64 X2 Mobile Technology TL-56 AuthenticAMD GNU/Linux

Original comment by b.ghiac...@gmail.com on 9 Aug 2010 at 1:32

GoogleCodeExporter commented 8 years ago 
g++ (Gentoo 4.4.3-r2 p1.2) 4.4.3
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Original comment by b.ghiac...@gmail.com on 9 Aug 2010 at 1:32

GoogleCodeExporter commented 8 years ago 

Could you addition a feature for unistall the software into all Makefile from 
HeeksCad/Cnc and libraries please.

Thanks,
Palumbo Eugenio.

Original comment by b.ghiac...@gmail.com on 9 Aug 2010 at 1:38

GoogleCodeExporter commented 8 years ago 
Please add this as a separate issue, and hope someone will do it. ( I am not a 
good enough Linux user, myself ). Can you make an "uninstall" feature yourself?

Original comment by danhe...@gmail.com on 9 Aug 2010 at 2:00

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
I have resolve the error, in fact was thoughtlessness because I added the flag 
-fPIC into /usr/local/src/heekscad/src/Makefile together my personal flags for 
optimize the final binary of the heekscad/cnc , you can manage this issues as 
resolved.

Thanks.

Original comment by b.ghiac...@gmail.com on 9 Aug 2010 at 7:50

GoogleCodeExporter commented 8 years ago 
ok. no problem.

Original comment by danhe...@gmail.com on 9 Aug 2010 at 8:28