[BUG] networks: -mynetwork error

hutchwilco commented 2 months ago

Describe the bug get Error response from daemon: network mynetwork not found

To Reproduce As per "non-vpn" instructions, Run docker-compose up -d let images pulled then error occurs

Expected behavior expected all containers to start

Screenshots If applicable, add screenshots to help explain your problem.

Platforms (please complete the following information): ubuntu 20

Docker compose file

yaml
version: "3.9"
name: media-stack
services:

  # To use/enable VPN, Run this compose file with --profile=vpn. Its highly recommended to use VPN.
  vpn:
    ## Read https://github.com/qdm12/gluetun-wiki/tree/main/setup/providers for details on configuring VPN for your service provider.
    profiles: ["vpn"]
    container_name: vpn
    image: qmcgaw/gluetun:v3.38.0
    cap_add:
      - NET_ADMIN
    environment:
      - VPN_SERVICE_PROVIDER=${VPN_SERVICE_PROVIDER:-nordvpn} # Valid values: nordvpn, expressvpn, protonvpn, surfshark or custom
      - OPENVPN_USER=${OPENVPN_USER:-""}
      - OPENVPN_PASSWORD=${OPENVPN_PASSWORD:-""}

      ## For list of server countries, visit https://raw.githubusercontent.com/qdm12/gluetun/master/internal/storage/servers.json
      ## When VPN_SERVICE_PROVIDER is custom. Comment the below line
      - SERVER_COUNTRIES=${SERVER_COUNTRIES:-Switzerland}

      # - FREE_ONLY=on  # Valid with protonvpn only. Value willbe set "on" if using free subscription provided by protonvpn

      ## Enable below if VPN_SERVICE_PROVIDER=custom
      # - VPN_TYPE=openvpn # or wireguard. 

      ## If VPN_TYPE is openvpn
      # - OPENVPN_CUSTOM_CONFIG=/gluetun/custom.conf

      ## If VPN_TYPE is wireguard. Replace below env variables as required.
      # - VPN_ENDPOINT_IP=1.2.3.4                                               # Replace with your wg endpoint ip or domain
      # - VPN_ENDPOINT_PORT=51820                                               # Replace with wg server port
      # - WIREGUARD_PUBLIC_KEY=wAUaJMhAq3NFutLHIdF8AN0B5WG8RndfQKLPTEDHal0=     # Replace with your wg public key
      # - WIREGUARD_PRIVATE_KEY=wOEI9rqqbDwnN8/Bpp22sVz48T71vJ4fYmFWujulwUU=    # Replace with your wg client private key
      # - WIREGUARD_PRESHARED_KEY=xOEI9rqqbDwnN8/Bpp22sVz48T71vJ4fYmFWujulwUU=  # Replaced with your wg pre-shared key
      # - WIREGUARD_ADDRESSES="10.64.222.21/32"                                 # Replace with wg address

    ## Enable volume if VPN_SERVICE_PROVIDER=custom and VPN_TYPE=openvpn is used
    # volumes:
      # - /yourpath/yourconfig.conf:/gluetun/config.conf:ro

    networks:
      - mynetwork

    # Uncomment/enable below ports if VPN is used/enabled
    # ports:
    #   # qbittorrent ports
    #   - 5080:5080
    #   - 6881:6881
    #   - 6881:6881/udp
    #   # prowlarr ports
    #   - 9696:9696
    restart: "unless-stopped"

  ## Default credentials of qBittorrent - Username: admin password: adminadmin ##
  ## Change password after install from UI --> Tools --> Options --> WebUI ##
  qbittorrent:
    container_name: qbittorrent
    image: lscr.io/linuxserver/qbittorrent:4.6.4

    # Unomment below if vpn is enabled
    # depends_on:               # Uncomment this line if vpn is enabled
    #   - vpn                   # Uncomment this line if vpn is enabled

    # Comment below lines if VPN is enabled
    networks:               # Comment this line if vpn is enabled
      - mynetwork           # Comment this line if vpn is enabled

    # Unomment below line if vpn is enabled
    # network_mode: service:vpn

    environment:
      - PUID=1000
      - PGID=1000
      - TZ=UTC
      - WEBUI_PORT=5080
    volumes:
      - qbittorrent-config:/config
      - torrent-downloads:/downloads

    ## Comment/Disable below ports if VPN is enabled
    ports:
      - 5080:5080
      - 6881:6881
      - 6881:6881/udp
    restart: "unless-stopped"

  radarr:
    container_name: radarr
    image: lscr.io/linuxserver/radarr:5.3.6
    networks:
      - mynetwork   # Comment this line if VPN is enabled
    ## Uncomment below lines if VPN is enabled
    #   mynetwork:
    #     ipv4_address: ${RADARR_STATIC_CONTAINER_IP} # It should be available IPv4 address in range of docker network `mynetwork` e.g. 172.20.0.2
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=UTC
    ports:
      - 7878:7878
    volumes:
      - radarr-config:/config
      - torrent-downloads:/downloads
    restart: "unless-stopped"

  sonarr:
    image: linuxserver/sonarr:4.0.3
    container_name: sonarr
    networks:
      - mynetwork   # Comment this line if VPN is enabled
    ## Uncomment below lines if VPN is enabled
    #   mynetwork:
    #     ipv4_address: ${SONARR_STATIC_CONTAINER_IP} # It should be available IPv4 address in range of docker network `mynetwork` e.g. 172.20.0.2
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=UTC
    volumes:
      - sonarr-config:/config
      - torrent-downloads:/downloads
    ports:
      - 8989:8989
    restart: unless-stopped

  prowlarr:
    container_name: prowlarr
    image: linuxserver/prowlarr:1.15.0

    # Uncomment below if vpn is enabled
    # depends_on:               # Uncomment this line if vpn is enabled
    #   - vpn                   # Uncomment this line if vpn is enabled
    # network_mode: service:vpn # Uncomment this line if vpn is enabled

    networks:               # Comment this line if vpn is enabled
      - mynetwork           # Comment this line if vpn is enabled
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=UTC
    volumes:
      - prowlarr-config:/config

    # Comment below ports if VPN is enabled.
    ports:
      - 9696:9696
    restart: unless-stopped

  jellyfin:
    image: linuxserver/jellyfin:10.8.13
    container_name: jellyfin
    networks:
      - mynetwork
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=UTC
    volumes:
      - jellyfin-config:/config
      - torrent-downloads:/data
  # devices:
   #  - /dev/videoN:/dev/videoN # Mount GPU device 
    ports:
      - 8096:8096
      - 7359:7359/udp
      - 8920:8920
    restart: unless-stopped

  # Doc: https://github.com/navilg/cleanmyarr
  # cleanmyarr:
  #   depends_on:
  #     - radarr
  #     - sonarr
  #   image: linuxshots/cleanmyarr:0.8.1
  #   container_name: cleanmyarr
  #   networks:
  #     - mynetwork
  #   volumes:
  #     - cleanmyarr-config:/config
    # restart: unless-stopped
    # environment:
    # - CMA_MAINTENANCE_CYCLE=${CMA_MAINTENANCE_CYCLE:-""}
    # - CMA_DELETE_AFTER_DAYS=${CMA_DELETE_AFTER_DAYS:-""}
    # - CMA_ENABLE_EMAIL_NOTIFICATION=${CMA_ENABLE_EMAIL_NOTIFICATION:-""}
    # - CMA_SMTP_USERNAME=${CMA_SMTP_USERNAME:-""}
    # - CMA_SMTP_ENCODED_PASSWORD=${CMA_SMTP_ENCODED_PASSWORD:-""}
    # - CMA_SMTP_TO_EMAILS=${CMA_SMTP_TO_EMAILS:-""}
    # - CMA_ENABLE_GOTIFY_NOTIFICATION=${CMA_ENABLE_GOTIFY_NOTIFICATION:-""}
    # - CMA_GOTIFY_URL=${CMA_GOTIFY_URL:-""}
    # - CMA_GOTIFY_ENCODED_APP_TOKEN=${CMA_GOTIFY_ENCODED_APP_TOKEN:-""}
    # - CMA_ENABLE_TELEGRAM_NOTIFICATION=${CMA_ENABLE_TELEGRAM_NOTIFICATION:-""}
    # - CMA_TELEGRAM_ENCODED_BOT_TOKEN=${CMA_TELEGRAM_ENCODED_BOT_TOKEN:-""}
    # - CMA_TELEGRAM_CHAT_ID=${CMA_TELEGRAM_CHAT_ID:-""}
    # - CMA_MONITOR_RADARR=${CMA_MONITOR_RADARR:-""}
    # - CMA_RADARR_URL=${CMA_RADARR_URL:-""}
    # - CMA_RADARR_ENCODED_API_KEY=${CMA_RADARR_ENCODED_API_KEY:-""}
    # - CMA_RADARR_ENABLE_NOTIFICATION=${CMA_RADARR_ENABLE_NOTIFICATION:-""}

volumes:
  torrent-downloads:
  radarr-config:
  sonarr-config:
  prowlarr-config:
  jellyfin-config:
  qbittorrent-config:
  # cleanmyarr-config:

networks:
  mynetwork:
    external: true

Additional context unrelated, but also get warning "media-stack/docker-compose.yml: version is obsolete"

navilg commented 2 months ago

You need to create network first.

docker network create --subnet 172.20.0.0/16 mynetwork
# Update CIDR range as per your IP range availability

Then run docker compose up

README.md Line 22

RageshAntonyHM commented 2 months ago

@navilg

I installed https://github.com/rogerfar/rdt-client and it's working in localhost:6500. And as per their instruction to connect radarr with rdt-client, I try to connect to rdt-client via "add download client -> qtorrent" and gave host as localhost.

But it's not connecting. Why? Any issue with the host name? or mynetwork issue

navilg / media-stack

[BUG] networks: -mynetwork error #41