Help with setting up the right Values

[1onord]

Hi all,

i setting up the Container, and MQTT, all works as aspected, but no values are send.

with qpiri 98:

Thu Jan 13 06:01:28 2022 INVERTER: Debug set Thu Jan 13 06:01:29 2022 INVERTER: Current CRC: 49 C1 Thu Jan 13 06:01:32 2022 INVERTER: QMOD read timeout Thu Jan 13 06:01:32 2022 INVERTER: QMOD reply too short (0 bytes) Thu Jan 13 06:01:32 2022 INVERTER: Current CRC: B7 A9 Thu Jan 13 06:01:35 2022 INVERTER: QPIGS read timeout Thu Jan 13 06:01:35 2022 INVERTER: QPIGS reply too short (0 bytes) Thu Jan 13 06:01:35 2022 INVERTER: Current CRC: F8 54 Thu Jan 13 06:01:38 2022 INVERTER: QPIRI read timeout Thu Jan 13 06:01:39 2022 INVERTER: QPIRI reply too short (0 bytes)

with 102:

Thu Jan 13 06:29:09 2022 INVERTER: Current CRC: F8 54 Thu Jan 13 06:29:11 2022 INVERTER: QPIRI reply size (102 bytes) Thu Jan 13 06:29:11 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer: (230.0 21.7 230.0 50.0 21.7 5000 4000 48.0 48.0 47.5 53.2 53.2 2 30 030 0 0 2 6 01 0 0 51.0 0 1� (NAK0 110�&

Thu Jan 13 06:29:11 2022 INVERTER: Current CRC: B4 DA Thu Jan 13 06:29:12 2022 INVERTER: QPIWS reply size (36 bytes) Thu Jan 13 06:29:12 2022 INVERTER: QPIWS: incorrect start/stop bytes. Buffer: (00000000000000000000000000000000�� 0 48.0 48.0 47.5 53.2 53.2 2 30 030 0 0 2 6 01 0 0 51.0 0 1� (NAK0 110�&

Thu Jan 13 06:29:17 2022 INVERTER: Current CRC: 49 C1 Thu Jan 13 06:29:18 2022 INVERTER: QMOD reply size (5 bytes) Thu Jan 13 06:29:18 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: (L 00000000000000000000000000�� 0 48.0 48.0 47.5 53.2 53.2 2 30 030 0 0 2 6 01 0 0 51.0 0 1� (NAK0 110�&

Inverter = Effekta AX K 5000 48V / 2,4KWp-PV / AX-Serie 5KVA Last / Hybrid

Adapter = https://www.amazon.de/VTOP-USB-RS232-Seriell-Adapter/dp/B01LVYR1AB/ref=sr_1_1_sspa?keywords=rs232+usb+adapter&qid=1642055767&sprefix=rs%2Caps%2C85&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTE1XUUZCMjlUNkVSJmVuY3J5cHRlZElkPUEwNjM5MTMwMVFBMDBRVzBGMkVDNSZlbmNyeXB0ZWRBZElkPUEwMDQxNTc5MzZQQVNBTU5RV0pSMSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

I read the whole Thread and try the most of the Things.

Did i miss something, or did i need another Adapter, can someone give me an Link to an Adapter that work ?

Any Help are welcome.

[gelu-constantin]

I have the same problem with reading an easun SV II I can't find exactly what settings to make for the 4 values qpiri qpiws qmod qpigs --- now I have 102 36 5 110 but nothing comes out of the interface. Somebody knou settings for EASUN SV II 5KW?

pi@raspberrypi:~ $ /opt/ha-inverter-mqtt-agent/sources/inverter-cli/inverter_poller -d -1 Wed Jan 19 17:21:36 2022 INVERTER: Debug set Wed Jan 19 17:21:36 2022 INVERTER: Current CRC: 49 C1 Wed Jan 19 17:21:37 2022 INVERTER: QMOD reply size (5 bytes) Wed Jan 19 17:21:37 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: ^0 Wed Jan 19 17:21:37 2022 INVERTER: Current CRC: B7 A9 Wed Jan 19 17:21:37 2022 INVERTER: QPIGS reply size (110 bytes) Wed Jan 19 17:21:37 2022 INVERTER: QPIGS: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:37 2022 INVERTER: Current CRC: F8 54 Wed Jan 19 17:21:38 2022 INVERTER: QPIRI reply size (102 bytes) Wed Jan 19 17:21:38 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer: ^0 Wed Jan 19 17:21:38 2022 INVERTER: Current CRC: B4 DA Wed Jan 19 17:21:39 2022 INVERTER: QPIWS reply size (36 bytes) Wed Jan 19 17:21:39 2022 INVERTER: QPIWS: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:44 2022 INVERTER: Current CRC: 49 C1 Wed Jan 19 17:21:45 2022 INVERTER: QMOD reply size (5 bytes) Wed Jan 19 17:21:45 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:45 2022 INVERTER: Current CRC: B7 A9 Wed Jan 19 17:21:48 2022 INVERTER: QPIGS reply size (110 bytes) Wed Jan 19 17:21:48 2022 INVERTER: QPIGS: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:48 2022 INVERTER: Current CRC: F8 54 Wed Jan 19 17:21:50 2022 INVERTER: QPIRI reply size (102 bytes) Wed Jan 19 17:21:50 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:50 2022 INVERTER: Current CRC: B4 DA Wed Jan 19 17:21:51 2022 INVERTER: QPIWS reply size (36 bytes) Wed Jan 19 17:21:51 2022 INVERTER: QPIWS: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:56 2022 INVERTER: Current CRC: 49 C1 Wed Jan 19 17:21:57 2022 INVERTER: QMOD reply size (5 bytes) Wed Jan 19 17:21:57 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:57 2022 INVERTER: Current CRC: B7 A9 Wed Jan 19 17:21:58 2022 INVERTER: QPIGS reply size (110 bytes) Wed Jan 19 17:21:58 2022 INVERTER: QPIGS: incorrect start/stop bytes. Buffer: Wed Jan 19 17:21:58 2022 INVERTER: Current CRC: F8 54 ^C pi@raspberrypi:~ $ cat /dev/usb/hiddev0 ▒^▒D▒1▒0▒6▒2▒3▒5▒1▒,▒5▒0▒0▒,▒2▒3▒5▒1▒,▒5▒0▒0▒,▒0▒6▒1▒1▒,▒0▒4▒8▒0▒,▒0▒1▒2▒,▒5▒3▒2▒,▒0▒0▒0▒,▒0▒0▒0▒,▒0▒0▒1▒,▒0▒0▒0▒,▒0▒5▒0▒,▒0▒2▒7▒,▒0▒0▒0▒,▒0▒0▒0▒,▒0▒0▒0▒0▒,▒0▒0▒0▒0▒,▒1▒2▒0▒3▒,▒0▒0▒0▒0▒,▒0▒▒▒^▒D▒1▒0▒6▒2▒3▒4▒9▒,▒4▒9▒9▒,▒2▒3▒4▒9▒,▒4▒9▒9▒,▒0▒6▒1▒0▒,▒0▒4▒7▒6▒,▒0▒1▒2▒,▒5▒3▒2▒,▒0▒0▒0▒,▒0▒0▒0▒,▒0▒0▒1▒,▒0▒0▒0▒,▒0▒5▒0▒,▒0▒2▒7▒,▒0▒0▒0▒,▒0▒0▒0▒,▒0▒0▒0▒0▒,▒0▒0▒0▒0▒,▒1▒2▒0▒5▒,▒0▒0▒0▒0▒,▒0 pi@raspberrypi:~ $ cat /dev/hidraw0 ^D1062348,499,2348,499,0^C3,0498,012,532,000,000,001,000,050,027,000,000,0000,0000,1199,0000,0,2,0,1,2,2,1,0m▒ pi@raspberrypi:~ $

with 108/41/5/110 sometimes working , sometimes not

Wed Jan 19 17:50:38 2022 INVERTER: Current CRC: F8 54 Wed Jan 19 17:50:39 2022 INVERTER: QPIRI reply size (108 bytes) Wed Jan 19 17:50:39 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer: ^D1062354,499,2302,499,0598,0513,011,529,000,000,011,000,047,030,000,000,0000,0000,0000,0000,0,0,0,1,2,2,0,0,0/dev/ttyS0 if you have a serial device,

/dev/ttyUSB0 if a USB<>Serial,

/dev/hidraw0 if you're connecting via the USB port on the inverter.

device=/dev/ttyUSB0

device=/dev/hidraw0

device=/dev/ttyS0

device=/dev/usb/hiddev0

How many times per hour is the program going to run...

This is used to calculate the PV & Load Watt Hours between runs...

If unsure, leave as default - it will run every minute...

(120 = every 30 seconds)...

run_interval=120

This allows you to modify the amperage in case the inverter is giving an incorrect

reading compared to measurement tools. Normally this will remain '1'

amperage_factor=1.0

This allows you to modify the wattage in case the inverter is giving an incorrect

reading compared to measurement tools. Normally this will remain '1'

watt_factor=1.0

The following settings allow you to modify runtime buffers.

N.B. These values may

Wed Jan 19 17:50:39 2022 INVERTER: Current CRC: B4 DA Wed Jan 19 17:50:41 2022 INVERTER: QPIWS reply size (41 bytes) Wed Jan 19 17:50:41 2022 INVERTER: QPIWS: incorrect start/stop bytes. Buffer: ^0 Wed Jan 19 17:50:46 2022 INVERTER: Current CRC: 49 C1 Wed Jan 19 17:50:46 2022 INVERTER: QMOD reply size (5 bytes) Wed Jan 19 17:50:46 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: Wed Jan 19 17:50:46 2022 INVERTER: Current CRC: B7 A9 Wed Jan 19 17:50:49 2022 INVERTER: QPIGS read timeout Wed Jan 19 17:50:49 2022 INVERTER: QPIGS reply too short (16 bytes) Wed Jan 19 17:50:49 2022 INVERTER: Current CRC: F8 54 Wed Jan 19 17:50:50 2022 INVERTER: QPIRI reply size (108 bytes) Wed Jan 19 17:50:50 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer: ^D1062363,500,2301,500,0575,0431,011,529,000,000,010,000,047,030,000,000,0000,0000,0000,0000,0,0,0,1,2,2,0,0,0/dev/ttyS0 if you have a serial device,

/dev/ttyUSB0 if a USB<>Serial,

/dev/hidraw0 if you're connecting via the USB port on the inverter.

device=/dev/ttyUSB0

device=/dev/hidraw0

device=/dev/ttyS0

device=/dev/usb/hiddev0

How many times per hour is the program going to run...

This is used to calculate the PV & Load Watt Hours between runs...

If unsure, leave as default - it will run every minute...

(120 = every 30 seconds)...

run_interval=120

This allows you to modify the amperage in case the inverter is giving an incorrect

reading compared to measurement tools. Normally this will remain '1'

amperage_factor=1.0

This allows you to modify the wattage in case the inverter is giving an incorrect

reading compared to measurement tools. Normally this will remain '1'

watt_factor=1.0

The following settings allow you to modify runtime buffers.

N.B. These values may

Wed Jan 19 17:50:50 2022 INVERTER: Current CRC: B4 DA Wed Jan 19 17:50:50 2022 INVERTER: QPIWS reply size (41 bytes) Wed Jan 19 17:50:50 2022 INVERTER: QPIWS: incorrect start/stop bytes. Buffer: ▒ Wed Jan 19 17:50:55 2022 INVERTER: Current CRC: 49 C1 Wed Jan 19 17:50:55 2022 INVERTER: QMOD reply size (5 bytes) Wed Jan 19 17:50:55 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: ▒4 Wed Jan 19 17:50:55 2022 INVERTER: Current CRC: B7 A9 PuTTYWed Jan 19 17:50:58 2022 INVERTER: QPIGS read timeout Wed Jan 19 17:50:58 2022 INVERTER: QPIGS reply too short (80 bytes) Wed Jan 19 17:50:58 2022 INVERTER: Current CRC: F8 54 Wed Jan 19 17:50:59 2022 INVERTER: QPIRI reply size (108 bytes) Wed Jan 19 17:50:59 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer: ,0000,00 Wed Jan 19 17:50:59 2022 INVERTER: Current CRC: B4 DA Wed Jan 19 17:51:01 2022 INVERTER: QPIWS reply size (41 bytes) Wed Jan 19 17:51:01 2022 INVERTER: QPIWS: incorrect start/stop bytes. Buffer: Wed Jan 19 17:51:06 2022 INVERTER: Current CRC: 49 C1 Wed Jan 19 17:51:06 2022 INVERTER: QMOD reply size (5 bytes) Wed Jan 19 17:51:06 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: 0 Wed Jan 19 17:51:06 2022 INVERTER: Current CRC: B7 A9 Wed Jan 19 17:51:08 2022 INVERTER: QPIGS reply size (110 bytes) Wed Jan 19 17:51:08 2022 INVERTER: QPIGS: incorrect start/stop bytes. Buffer: Wed Jan 19 17:51:08 2022 INVERTER: Current CRC: F8 54 Wed Jan 19 17:51:10 2022 INVERTER: QPIRI reply size (108 bytes) Wed Jan 19 17:51:10 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer: Wed Jan 19 17:51:10 2022 INVERTER: Current CRC: B4 DA Wed Jan 19 17:51:10 2022 INVERTER: QPIWS reply size (41 bytes) Wed Jan 19 17:51:10 2022 INVERTER: QPIWS: incorrect start/stop bytes. Buffer: ^0 Wed Jan 19 17:51:15 2022 INVERTER: Current CRC: 49 C1 Wed Jan 19 17:51:16 2022 INVERTER: QMOD reply size (5 bytes) Wed Jan 19 17:51:16 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: Wed Jan 19 17:51:16 2022 INVERTER: Current CRC: B7 A9 Wed Jan 19 17:51:16 2022 INVERTER: QPIGS reply size (110 bytes) Wed Jan 19 17:51:16 2022 INVERTER: QPIGS: incorrect start/stop bytes. Buffer: ^0 Wed Jan 19 17:51:16 2022 INVERTER: Current CRC: F8 54 Wed Jan 19 17:51:18 2022 INVERTER: QPIRI reply size (108 bytes) Wed Jan 19 17:51:18 2022 INVERTER: QPIRI: incorrect start/stop bytes. Buffer:

[eloquentvogon]

@1onord did you get this working ? I am having the same issue with a MPP inverter, thanks

[1onord]

unfortunately not I had switched to the Growatt SPF series in the meantime after this Inverter talked to the BMS of my lithium Battery. I think it was the Adapter in my Case. I'm very happy with the current solution I've never looked back ;)

[eloquentvogon]

@1onord thanks for the follow up! I appreciate it

[eloquentvogon]

Turns out from what I can see the LVX6048WP is running PI17

[robwolff3]

@eloquentvogon is PI17 not compatible with docker-voltronic-homeassistant?

I also have a LVX6048WP and am trying to use this project.

[eloquentvogon]

@robwolff3 I was not able to get to work, I went with another project that was super basic just reading inverter info and sending to a mqtt server. From there to homeassitant and grafana, not sure on protocol of dropping other projects in comments.

[robwolff3]

I found the one you're talking about :) Got that one working for me too. And even wrote a bit for them on running their project in docker.

[eloquentvogon]

@robwolff3 awesome! good to hear

[carmelo42]

@robwolff3 I was not able to get to work, I went with another project that was super basic just reading inverter info and sending to a mqtt server. From there to homeassitant and grafana, not sure on protocol of dropping other projects in comments.

Which project please ?

[robwolff3]

Which project please ?

mpp-solar