Data stopped from the inverter - Voltronic Axpert MKS IV 5.6kW

ned-kelly / docker-voltronic-homeassistant

Programmatically read data from your Voltronic, Axpert, Mppsolar PIP, Voltacon, Effekta etc Inverter and send it to Home Assistant via MQTT - Works with RS232 & USB!

GNU General Public License v3.0

269 stars 144 forks source link

Data stopped from the inverter - Voltronic Axpert MKS IV 5.6kW #81

Closed amagr0 closed 2 years ago

amagr0 commented 2 years ago

Hello,

After some hours of working well, the data simply stopped from being send from the inverter. What could cause this issue?

Inverter: Voltronic Axpert MKS IV 5.6kW

Configuration:

device=/dev/hidraw0
run_interval=120
qpiri=103
qpiws=40
qmod=5
qpigs=110

....

There's also some issue with displayed value - voltronic_Battery_redischarge_voltage

Thanks, AMagro

amagr0 commented 2 years ago

I changed the qpiws to 56 as someone suggested for my inversor, but after a while I lost data again.

I found that the container status is actually unhealthy, what could cause this issue?

ned-kelly commented 2 years ago

Hi there,

This sounds like possibly there may be a bad earth or something that's effecting the data transfer to the inverter.

Does rebooting fix it?