ned-kelly
commented
1 year ago Hi,
Unfortunately I don’t have any availability to add any new features to this project as I am quite time poor - If you want to submit a PR with the feature id be happy to review and approve.
Otherwise it might be worth checking if you can somehow “exclude” specific container names from HA PI image.
I run HA stand-alone in docker, so unfortunately this is all I’m prepared to test with.
Cheers
On Wed, 31 Aug 2022 at 5:50 pm, burghs @.***> wrote:
Hi there,
Apologies in advance if this has been covered already...
I was just wondering if it would be possible to make this project available for installation as a custom repository in HACS perhaps to get away from the "Unsupported Installation" error in HA?
The reason I am enquiring is that my Home Assistant is running under a supervised install on a Pi4 which is quite close to the inverter therefore I have the docker containers for the inverter monitor running on it as well. The only caveat with this configuration is that Home Assistant displays a "Unsupported Installation" under system health which I can clear when the watchtower and ha-voltronci-mqtt containers are stopped first and restart the HA supervisor. This will then allow me to run HA updates and then I go back to starting up the containers again.
— Reply to this email directly, view it on GitHub https://github.com/ned-kelly/docker-voltronic-homeassistant/issues/87, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEGUYRJWH2WAFLLXFN6F2WTV34FEBANCNFSM6AAAAAAQBDRURY . You are receiving this because you are subscribed to this thread.Message ID: @.***>
-- Sent from Gmail Mobile
Hi there,
Apologies in advance if this has been covered already...
I was just wondering if it would be possible to make this project available for installation as a custom repository in HACS perhaps to get away from the "Unsupported Installation" error in HA?
The reason I am enquiring is that my Home Assistant is running under a supervised install on a Pi4 which is quite close to the inverter therefore I have the docker containers for the inverter monitor running on it as well. The only caveat with this configuration is that Home Assistant displays a "Unsupported Installation" under system health which I can clear when the watchtower and ha-voltronci-mqtt containers are stopped first and restart the HA supervisor. This will then allow me to run HA updates and then I go back to starting up the containers again.