Setup Wizard Ended Prematurely

[aapple12314]

README first

Before you report issues with the setup, make sure to check the following things first:

• Are you on anything older than Windows 10? Windows XP/Vista/7/8/8.1 are not supported so don't report this as an issue, it is intentional.
• Have you chosen the right setup for your CPU architecture?
  • You can not mix these, make sure to download and run the correct setup.
  • ARM/ARM64 is not supported. See above link to check for yourself.

I verified all that and am still stuck

Please provide the following log files and attach them to the issue. Failing to do so will result in the issue being closed without any further comment.

Setup log

Run the setup from the command line (either old-school cmd or PowerShell) with the following additional arguments: install.log setupapi.dev.log

This will generate the log file install.log in the same directory the setup resides in. Attach it once the setup is "done" failing.

Last but not least look for C:\Windows\INF\setupapi.dev.log and attach it as well.

Optionally compress both files down if it gives you troubles uploading.

Your compliance is apprechiated! 😘

[nefarius]

The answer is literally in the same post, I leave it up to the reader to figure it out 🤣