Closed negan07 closed 6 years ago
FW 1.64
Modulations: G.Dmt Enabled G.lite Enabled T1.413 Enabled ADSL2 Enabled AnnexL Enabled ADSL2+ Enabled AnnexM Enabled VDSL2 Enabled VDSL2 profiles: 8a Enabled 8b Enabled 8c Enabled 8d Enabled 12a Enabled 12b Enabled 17a Enabled 30a Enabled US0 Enabled Phone line pair: Inner pair Capability: bitswap On sra On trellis On sesdrop Off CoMinMgn Off 24k On phyReXmt(Us/Ds) Off/On Ginp(Us/Ds) On/On TpsTc AvPvAa monitorTone: On dynamicD: On dynamicF: Off SOS: On Training Margin(Q4 in dB): -1(DEFAULT)
I'm on FW V1.0.0.38_1.0.1_lanip_reserve with ancistrus installed, and I see the same values of BoostOver
Modulations: G.Dmt Enabled G.lite Enabled T1.413 Enabled ADSL2 Enabled AnnexL Enabled ADSL2+ Enabled AnnexM Enabled VDSL2 Enabled VDSL2 profiles: 8a Enabled 8b Enabled 8c Enabled 8d Enabled 12a Enabled 12b Enabled 17a Enabled 30a Enabled US0 Enabled Phone line pair: Inner pair Capability: bitswap On sra On trellis On sesdrop Off CoMinMgn Off 24k On phyReXmt(Us/Ds) Off/On Ginp(Us/Ds) On/On TpsTc AvPvAa monitorTone: On dynamicD: On dynamicF: Off SOS: On Training Margin(Q4 in dB): -1(DEFAULT)
FW V1 .0.0.38_1.0.1_lanip_reserve which fw is it ?
I think a issue fixed of IP la reservation (beta FW)
It was a beta firmware based on the 1.0.0.38 fw that was released in order to fix the dhcp address reservation that wasn't working. I have some problem with my router (it crashes randomly, I don't know which is the problem but probably is the one related with the newer devices over the wifi) and that firmware is the one that crashes less (but still crashes every one-three days). When you release the new version I will give it a try. Thanks for all your work!
Here is mine (with your build 211 based on FW V1.0.1.54):
Modulations: G.Dmt Enabled G.lite Enabled T1.413 Enabled ADSL2 Enabled AnnexL Enabled ADSL2+ Enabled AnnexM Disabled VDSL2 Enabled
Phone line pair: Inner pair
Capability: bitswap On sra Off trellis On sesdrop Off CoMinMgn Off 24k On phyReXmt(Us/Ds) Off/On Ginp(Us/Ds) On/On TpsTc AvPvAa monitorTone: On dynamicD: On dynamicF: Off SOS: On Training Margin(Q4 in dB): 65480
it seems drivers makes all defaults not dslam: I had this doubt now fixed
Unfortunately wifi drivers are closed so no way to substitute them but you can create a package with those of .38 and then install them into newer releases.
FW 1.54 Modulations: G.Dmt Enabled G.lite Enabled T1.413 Enabled ADSL2 Enabled AnnexL Enabled ADSL2+ Enabled AnnexM Disabled VDSL2 Enabled Phone line pair: Inner pair Capability: bitswap On sra Off trellis On sesdrop Off CoMinMgn Off 24k On phyReXmt(Us/Ds) Off/On Ginp(Us/Ds) On/On TpsTc AvPvAa monitorTone: On dynamicD: On dynamicF: Off SOS: On Training Margin(Q4 in dB): 25
Looking at the dsl parameters tweaking.
Should be useful to have boundary conditions for both VDSL(PTM)/ADSL(ATM) connection modes.
The console output of the command:
xdslctl profile --show
VDSL(PTM) got.
Still needed ADSL(ATM)
Someone still under ADSL(ATM) can please write here the result of the command above. Thanks in advance.