Throttle & Elevator Trims values show reversed via eepe

[GoogleCodeExporter]

What steps will reproduce the problem?
1.Set sub trims for elevator from Transmitter
2.Save model via eepe
3.When you view model in eepe then trim shows on Throttle not Elevator

What is the expected output? What do you see instead?
Trim should show on Elevator channel

What version of the product are you using? On what operating system?
R254

Please provide any additional information below.
If trim values are set via eepe then loaded to transmitter the Elevator value 
appears on the Throttle channel

Original issue reported on code.google.com by iana...@hotmail.com on 11 Jul 2011 at 7:19

[GoogleCodeExporter]

A few days ago I've reported a problem on the RC Groups forum that might be 
also related to this problem. In eepe, when changing the trims for elevator it 
moves the throttle cursor on the simulator and vice-versa. Here is a video:

http://www.youtube.com/watch?v=AauwZcGI2bc

I should really have openned an issue then.. but here it is  :-) 

Original comment by joaoalve...@googlemail.com on 11 Jul 2011 at 8:44

[GoogleCodeExporter]

This is indeed the problem & your video is spot on.
I used eepe to try and set up a model from the settings taken out of my dx8 
and as you can imagine the trouble it caused when I loaded it's model memory 
to my er9x which took the trim from the Elevator & moved it to the Throttle 
trim.

Original comment by iana...@hotmail.com on 11 Jul 2011 at 10:30

[GoogleCodeExporter]

you're talking about the sub trim on the "limits" menu, right??

Original comment by joaoalve...@googlemail.com on 12 Jul 2011 at 12:41

[GoogleCodeExporter]

I see it guys.   I'll work on it.

Original comment by erezra...@gmail.com on 12 Jul 2011 at 1:24

[GoogleCodeExporter]

Original comment by erezra...@gmail.com on 13 Jul 2011 at 1:29

• Changed state: Fixed

[GoogleCodeExporter]

Hi, Issue fixed via eepe but if you add Elevator trim in eepe then load it to 
your transmitter it appears on the Throttle channel ?!!!, something still amiss 
I think.

Original comment by iana...@hotmail.com on 13 Jul 2011 at 6:20