search

networkupstools / nut

The Network UPS Tools repository. UPS management protocol Informational RFC 9271 published by IETF at https://www.rfc-editor.org/info/rfc9271 Please star NUT on GitHub, this helps with sponsorships!
https://networkupstools.org/
Other
2.11k stars 352 forks source link

Windows: Try installing libUSB manually. #1145

Open 4SiB opened 3 years ago

4SiB commented 3 years ago

NUT at windows installed. copy sbin\libgcc_s_dw2-1.dll bin Download https://indy.fulgan.com/SSL/Archive/openssl-0.9.8e-i386-win32.zip extract to NUT\bin and NUT\sbin

bin\nut-scanner.exe
Cannot load USB library (libusb) : Nie mo┐na odnalečŠ okreťlonego modu│u.. USB search disabled.
Cannot load SNMP library (libnetsnmp) : Nie mo┐na odnalečŠ okreťlonego modu│u.. SNMP search disabled.
Cannot load XML library (libneon) : Nie mo┐na odnalečŠ okreťlonego modu│u.. XML search disabled.
Cannot load NUT library (libupsclient) : Nie mo┐na odnalečŠ okreťlonego modu│u.. NUT search disabled.

Add/Remove Programs \ NUT \ Repair button

NUT UPS driver installer.
-------------------------

Searching for known UPS...
Found UPS : vendor ID = 51D - Product ID = 3
Extracting driver files...
  Success
  USB\VID_051D&PID_0003&REV_0001: Installing driver
Requested resource not found
An error occured while installing driver.
Try installing libUSB manually.
Hit enter to continue

At others 3 ISSUE here I not found a solution. Where is a proper USB LIB package, or not exist ?

BuxtonCalvin commented 2 years ago

Can someone fix this basic install issue. I see the same errors on a 64bit winpro machine with a USB connection to the APC UPS. Very frustrating.

jimklimov commented 2 years ago

Hello, to help investigate, can you please link to the Windows package of NUT you are trying? AFAIK, there were spin-offs to enable Windows builds, last branched from v2.6.5, so about a decade ago. It would be interesting to revive that ability with modern NUT codebase, but contributors may be needed.

On Sun, Nov 28, 2021, 05:07 Buxton @.***> wrote:

Can someone fix this basic install issue. I see the same errors on a 64bit winpro machine with a USB connection to the APC UPS. Very frustrating.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/networkupstools/nut/issues/1145#issuecomment-980836484, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAMPTFGKBUISEKLI52Z3UWTUOGTGVANCNFSM5GVDB23A . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

4SiB commented 2 years ago

I use https://networkupstools.org/download.html#_binary_packages : Windows (complete port, Beta): Windows MSI installer 2.6.5-6

BuxtonCalvin commented 2 years ago

There is only one link that I'm aware of: https://networkupstools.org/download.html#_binary_packages. If there are other builds, it would be great if you could link to them on the download page.

Hello, to help investigate, can you please link to the Windows package of NUT you are trying? AFAIK, there were spin-offs to enable Windows builds, last branched from v2.6.5, so about a decade ago. It would be interesting to revive that ability with modern NUT codebase, but contributors may be needed. … On Sun, Nov 28, 2021, 05:07 Buxton @.***> wrote: Can someone fix this basic install issue. I see the same errors on a 64bit winpro machine with a USB connection to the APC UPS. Very frustrating. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#1145 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAMPTFGKBUISEKLI52Z3UWTUOGTGVANCNFSM5GVDB23A . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

4SiB commented 2 years ago

http://www.networkupstools.org/package/windows/NUT-Installer-2.6.5-6.msi I not know anything about newer package for windows.

jimklimov commented 2 years ago

Me neither, just wondered if there was an "unaccounted for" effort newer than the 2.6.5-based branch.

On Fri, Dec 3, 2021, 13:21 4SiB @.***> wrote:

http://www.networkupstools.org/package/windows/NUT-Installer-2.6.5-6.msi I not know anything about newer package for windows.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/networkupstools/nut/issues/1145#issuecomment-985475348, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAMPTFH7GMTRZJX3YQSPACDUPCY3JANCNFSM5GVDB23A . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

kramttocs commented 2 years ago

Same here. Even messing around with the manual libusb and copying the dlls over doesn't work. Was trying to follow this guide: https://titanwolf.org/Network/Articles/Article?AID=2ee344ef-6bec-440d-8d1c-d21777ffea12 but couldn't get past the usb search error.

kramttocs commented 2 years ago

Correction: I just failed to follow the instructions fully and missed renaming one of the dlls. Nut-scanner.exe shows it correctly and the service is running successfully.
Haven't tried connecting a client to it yet.

kramttocs commented 2 years ago

upsc.exe is returning an error of: 'Error: Connection failure: Unknown error' and trying WinNut isn't working either so something is still amiss.

Event Viewer is showing a periodic warning message of:

usbhid-ups - libusb_get_report: libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning.

WinterPhoenix commented 2 years ago

I'm having the same issue with Windows MSI installer 2.6.5-6:

> C:\Program Files (x86)\NUT\others\wdi-simple.exe

NUT UPS driver installer.
-------------------------

Searching for known UPS...
Found UPS : vendor ID = 764 - Product ID = 501
Extracting driver files...
  Success
  USB\VID_0764&PID_0501&REV_0001: Installing driver
Requested resource not found
An error occured while installing driver.
Try installing libUSB manually.
Hit enter to continue

It does warn that it's a Beta I guess.

Edit: Oh, apparently 2.6.5 is ancient. Why even have that on the Downloads page anymore? It's clearly not a "beta" so much as it is abandoned.

jimklimov commented 2 years ago

During the past months I've revived an effort to merge that old branch made from NUT 2.6.5 with current codebase, with progress covered in issue #5 abd getting more and more drivers built. I did not touch the installer yet, however, so can't comment on it well. More able hands are welcome =)

jo-chemla commented 2 years ago

During the past months I've revived an effort to merge that old branch made from NUT 2.6.5 with current codebase,

Thanks for the info @jimklimov, great to hear! Is there any drawback to using nut installed on Windows/Ubuntu via the Windows Subsystem for Linux WSL?

jimklimov commented 2 years ago

Did not try WSL with local-access devices (usb/serial), so no idea if you can pass-through the connections to that VM or how.

A WSL Ubuntu did suffice for me to build NUT (same as for other Linux, no relation to a Windows-binary build). Probably network drivers (snmmp, netxml...) would work and then no quick ideas how to shut down Windows from the Ubuntu session (or if it runs at all until you open a terminal).

Anutrix commented 2 years ago

libwdi code we use to install driver on Windows is from over 11 years ago. I think it's about time we update it.

jimklimov commented 2 years ago

So far MSI packaging was not re-explored, so practically we don't use that, yet. If something is doable to improve it, and usable on at least modern Windows (XP+?), be our guest to try. Maybe makes sense to revive what allegedly worked first though, might be a simpler stepping stone.

maxshcherbina commented 10 months ago

I was wondering if there has been progress made on this?

jimklimov commented 10 months ago

Unfortunately, none that I know of. I've tried for a few hours to understand the installer tech used before, and how the template could be extended to cover the many new files and groupings we have in current codebase (they seem to list UUIDs and maybe hashes of the delivered files, so there gotta be some tooling which would collect the info from the built proto-install area), but left not much wiser and had other priorities since.

Generally I summarized the current state of NUT for Windows effort at https://github.com/networkupstools/nut/wiki/NUT-for-Windows

thisIsNotTheFoxUrLookingFor commented 4 months ago

Run C:\Program Files (x86)\NUT\others\wdi-simple.exe as administrator, this allows libusb driver to be installed

image

pHarlock commented 3 months ago

Run C:\Program Files (x86)\NUT\others\wdi-simple.exe as administrator, this allows libusb driver to be installed

This didin't work on my ws2022 install, still the same "install libusb manually". I know this is a very old build but I'd be running old powerware software if i could find my old downloads or cd.

jimklimov commented 3 months ago

Just in case, did you have a chance to try the newer builds from https://github.com/networkupstools/nut/wiki/NUT-for-Windows effort? They are not packaged (no MSI) yet, just tarballs with all programs and DLLs in an expected layout, coming straight from the CI build farm... and there would be a bit of trickery about libusb, as documented there. If you walk this path, would be great to hear back (not much feedback so far)!

dusanhauko commented 3 months ago

Correction: I just failed to follow the instructions fully and missed renaming one of the dlls. Nut-scanner.exe shows it correctly and the service is running successfully. Haven't tried connecting a client to it yet.

Hello kramttocs. You write something about renaming some files to make NUT service working. The link in one your post does not work anymore. Can you please give me name of the files to rename? Dusan