Open grydan opened 11 months ago
I have run in another moment (because the Resource busy... message) and this is result:
sudo /usr/lib/nut/nutdrv_qx -DDDD -a vultech
Network UPS Tools - Generic Q* USB/Serial driver 0.32 (2.8.0)
USB communication driver (libusb 1.0) 0.43
0.000000 [D3] do_global_args: var='maxretry' val='3'
0.002399 [D3] main_arg: var='driver' val='nutdrv_qx'
0.002559 [D3] main_arg: var='desc' val='Vultech GS-1KVAS-RK'
0.003260 [D3] main_arg: var='port' val='auto'
0.003900 [D3] main_arg: var='vendorid' val='0925'
0.004032 [D3] main_arg: var='productid' val='1234'
0.004328 [D3] main_arg: var='subdriver' val='armac'
0.004486 [D3] main_arg: var='product' val='STD UPS MON V2.0'
0.004621 [D3] main_arg: var='bus' val='001'
0.004745 [D1] debug level is '4'
0.006250 [D1] upsdrv_initups...
0.021625 [D2] Checking device 1 of 4 (1D6B/0003)
0.021853 [D1] Failed to open device (1D6B/0003), skipping: Access denied (insufficient permissions)
0.022324 [D2] Checking device 2 of 4 (0925/1234)
0.030507 [D2] - VendorID: 0925
0.030629 [D2] - ProductID: 1234
0.031061 [D2] - Manufacturer: unknown
0.031106 [D2] - Product: STD UPS MON V2.0
0.031146 [D2] - Serial Number: J9552E6E43FBC05
0.031184 [D2] - Bus: 001
0.031222 [D2] - Device: unknown
0.031260 [D2] - Device release number: 0001
0.031298 [D2] Trying to match device
0.031338 [D3] match_function_regex: matching a device...
0.031912 [D2] Device matches
0.031995 [D2] Reading first configuration descriptor
0.032133 [D3] libusb_kernel_driver_active() returned 0
0.032370 [D2] Claimed interface 0 successfully
0.032495 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
0.032631 [D2] armac: unsupported cmd: QGS
0.032764 [D2] qx_process_answer: short reply (input.voltage)
0.032877 [D2] armac: unsupported cmd: QGS
0.033008 [D2] qx_process_answer: short reply (input.voltage)
0.033052 [D2] armac: unsupported cmd: QGS
0.033092 [D2] qx_process_answer: short reply (input.voltage)
0.033134 [D2] armac: unsupported cmd: M
0.033177 [D2] voltronic_qs_protocol: invalid protocol [M]
0.033217 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.033257 [D2] armac: unsupported cmd: M
0.033298 [D2] voltronic_qs_protocol: invalid protocol [M]
0.033338 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.033378 [D2] armac: unsupported cmd: M
0.033419 [D2] voltronic_qs_protocol: invalid protocol [M]
0.033458 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.033499 [D2] armac: unsupported cmd: M
0.033541 [D2] voltronic_qs_hex_protocol: invalid protocol [M]
0.033581 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.033621 [D2] armac: unsupported cmd: M
0.033662 [D2] voltronic_qs_hex_protocol: invalid protocol [M]
0.033702 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.033742 [D2] armac: unsupported cmd: M
0.033782 [D2] voltronic_qs_hex_protocol: invalid protocol [M]
0.033821 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.033862 [D2] armac: unsupported cmd: QS
0.033903 [D2] qx_process_answer: short reply (input.voltage)
0.033943 [D2] armac: unsupported cmd: QS
0.033982 [D2] qx_process_answer: short reply (input.voltage)
0.034022 [D2] armac: unsupported cmd: QS
0.034062 [D2] qx_process_answer: short reply (input.voltage)
0.034102 [D2] armac: unsupported cmd: D
0.034142 [D2] qx_process_answer: short reply (input.voltage)
0.034182 [D2] armac: unsupported cmd: D
0.034237 [D2] qx_process_answer: short reply (input.voltage)
0.034279 [D2] armac: unsupported cmd: D
0.034318 [D2] qx_process_answer: short reply (input.voltage)
0.034360 [D4] armac command Q1
0.101586 [D4] read: ret 6 buf a6: 28 32 34 31 2e >(241.<
0.122582 [D4] read: ret 6 buf 86: 35 20 30 30 30 >5 000<
0.143545 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
0.164543 [D4] read: ret 6 buf 86: 30 2e 30 20 30 >0.0 0<
0.184552 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
0.205551 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
0.226694 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
0.247645 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
0.268640 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.769766 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
1.770643 [D1] interrupt read error: Operation timed out (-7)
1.770866 [D4] qx_process: failed to preprocess answer [input.voltage]
1.771905 [D4] armac command Q1
1.850818 [D4] read: ret 6 buf a6: 28 32 34 31 2e >(241.<
1.871823 [D4] read: ret 6 buf 86: 34 20 30 30 30 >4 000<
1.892864 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
1.913859 [D4] read: ret 6 buf 86: 30 2e 30 20 30 >0.0 0<
1.933829 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
1.954861 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
1.975867 [D4] read: ret 6 buf a6: 32 35 20 34 34 >25 44<
1.996875 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
2.017871 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.521010 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
3.521873 [D1] interrupt read error: Operation timed out (-7)
3.522091 [D4] qx_process: failed to preprocess answer [input.voltage]
3.523065 [D4] armac command Q1
3.601052 [D4] read: ret 6 buf a6: 28 32 34 31 2e >(241.<
3.622101 [D4] read: ret 6 buf 86: 37 20 30 30 30 >7 000<
3.643094 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
3.664101 [D4] read: ret 6 buf 86: 30 2e 30 20 30 >0.0 0<
3.685099 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
3.706130 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
3.726103 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
3.747110 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
3.768116 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.272227 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
5.272997 [D1] interrupt read error: Operation timed out (-7)
5.273117 [D4] qx_process: failed to preprocess answer [input.voltage]
5.273201 [D4] armac command Q1
5.350310 [D4] read: ret 6 buf a6: 28 32 34 31 2e >(241.<
5.371346 [D4] read: ret 6 buf 86: 32 20 30 30 30 >2 000<
5.392335 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
5.413331 [D4] read: ret 6 buf 86: 30 2e 30 20 30 >0.0 0<
5.434329 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
5.455306 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
5.475346 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
5.496339 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
5.517324 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.013519 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
7.014367 [D1] interrupt read error: Operation timed out (-7)
7.014485 [D4] qx_process: failed to preprocess answer [input.voltage]
7.014556 [D4] armac command Q1
7.050520 [D4] read: ret 6 buf a6: 28 32 34 31 2e >(241.<
7.071601 [D4] read: ret 6 buf 86: 33 20 30 30 30 >3 000<
7.092535 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
7.113564 [D4] read: ret 6 buf 86: 39 2e 38 20 30 >9.8 0<
7.134574 [D4] read: ret 6 buf a6: 32 30 20 34 39 >20 49<
7.154574 [D4] read: ret 6 buf 86: 2e 39 20 32 2e >.9 2.<
7.175639 [D4] read: ret 6 buf a6: 32 35 20 34 34 >25 44<
7.196577 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
7.217552 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.715717 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
8.716482 [D1] interrupt read error: Operation timed out (-7)
8.716574 [D4] qx_process: failed to preprocess answer [input.voltage]
8.716651 [D4] armac command Q1
8.801752 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
8.822781 [D4] read: ret 6 buf 86: 39 20 30 30 30 >9 000<
8.842791 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
8.863791 [D4] read: ret 6 buf 86: 30 2e 30 20 30 >0.0 0<
8.884794 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
8.905798 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
8.926801 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
8.947803 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
8.967805 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.466940 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
10.467704 [D1] interrupt read error: Operation timed out (-7)
10.467823 [D4] qx_process: failed to preprocess answer [input.voltage]
10.467910 [D4] armac command Q1
10.551005 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
10.572002 [D4] read: ret 6 buf 86: 35 20 30 30 30 >5 000<
10.592029 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
10.612996 [D4] read: ret 6 buf 86: 30 2e 31 20 30 >0.1 0<
10.634034 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
10.655004 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
10.676069 [D4] read: ret 6 buf a6: 32 35 20 34 34 >25 44<
10.697041 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
10.717042 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.218151 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
12.218923 [D1] interrupt read error: Operation timed out (-7)
12.219032 [D4] qx_process: failed to preprocess answer [input.voltage]
12.219113 [D4] armac command Q1
12.301230 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
12.322232 [D4] read: ret 6 buf 86: 37 20 30 30 30 >7 000<
12.343266 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
12.364267 [D4] read: ret 6 buf 86: 30 2e 36 20 30 >0.6 0<
12.384267 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
12.405234 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
12.426277 [D4] read: ret 6 buf a6: 32 35 20 34 34 >25 44<
12.447277 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
12.468279 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.969420 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
13.970155 [D1] interrupt read error: Operation timed out (-7)
13.970261 [D4] qx_process: failed to preprocess answer [input.voltage]
13.970345 [D4] armac command Q1
14.050462 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
14.071467 [D4] read: ret 6 buf 86: 35 20 30 30 30 >5 000<
14.092471 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
14.113502 [D4] read: ret 6 buf 86: 39 2e 38 20 30 >9.8 0<
14.133475 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
14.154505 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
14.175514 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
14.196515 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
14.217496 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.720696 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
15.721413 [D1] interrupt read error: Operation timed out (-7)
15.721536 [D4] qx_process: failed to preprocess answer [input.voltage]
15.721618 [D4] armac command Q1
15.801740 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
15.821738 [D4] read: ret 6 buf 86: 35 20 30 30 30 >5 000<
15.842737 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
15.863738 [D4] read: ret 6 buf 86: 39 2e 39 20 30 >9.9 0<
15.884709 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
15.905745 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
15.926741 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
15.946742 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
15.967745 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.471970 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
17.472777 [D1] interrupt read error: Operation timed out (-7)
17.472893 [D4] qx_process: failed to preprocess answer [input.voltage]
17.472973 [D4] armac command Q1
17.550940 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
17.570972 [D4] read: ret 6 buf 86: 35 20 30 30 30 >5 000<
17.591976 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
17.612970 [D4] read: ret 6 buf 86: 39 2e 39 20 30 >9.9 0<
17.633977 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
17.654979 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
17.675950 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
17.695987 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
17.716993 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.213106 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
19.213770 [D1] interrupt read error: Operation timed out (-7)
19.213861 [D4] qx_process: failed to preprocess answer [input.voltage]
19.213936 [D4] armac command Q1
19.250164 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
19.271203 [D4] read: ret 6 buf 86: 32 20 30 30 30 >2 000<
19.292211 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
19.313240 [D4] read: ret 6 buf 86: 39 2e 39 20 30 >9.9 0<
19.334173 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
19.355206 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
19.375177 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
19.396182 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
19.417185 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.913312 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
20.914116 [D1] interrupt read error: Operation timed out (-7)
20.914237 [D4] qx_process: failed to preprocess answer [input.voltage]
20.914331 [D2] find_nut_info: info type series not found
20.914400 [D2] claim: cannot find series
20.914474 [D2] find_nut_info: info type series not found
20.914538 [D2] claim: cannot find series
20.914610 [D2] find_nut_info: info type series not found
20.914859 [D2] claim: cannot find series
20.914945 [D4] armac command Q1
21.001441 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
21.022405 [D4] read: ret 6 buf 86: 39 20 30 30 30 >9 000<
21.042411 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
21.063408 [D4] read: ret 6 buf 86: 30 2e 30 20 30 >0.0 0<
21.084440 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
21.105442 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
21.126445 [D4] read: ret 6 buf a6: 32 33 20 34 34 >23 44<
21.147446 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
21.167453 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.664602 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
22.665354 [D1] interrupt read error: Operation timed out (-7)
22.665479 [D4] qx_process: failed to preprocess answer [input.voltage]
22.665567 [D4] armac command Q1
22.701667 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
22.721672 [D4] read: ret 6 buf 86: 37 20 30 30 30 >7 000<
22.742638 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
22.763701 [D4] read: ret 6 buf 86: 39 2e 37 20 30 >9.7 0<
22.784643 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
22.805671 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
22.826647 [D4] read: ret 6 buf a6: 32 31 20 34 34 >21 44<
22.846685 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
22.867655 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.365821 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
24.366564 [D1] interrupt read error: Operation timed out (-7)
24.366673 [D4] qx_process: failed to preprocess answer [input.voltage]
24.366753 [D4] armac command Q1
24.405862 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
24.426901 [D4] read: ret 6 buf 86: 37 20 30 30 30 >7 000<
24.447943 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
24.468877 [D4] read: ret 6 buf 86: 39 2e 37 20 30 >9.7 0<
24.489873 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
24.509908 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
24.530880 [D4] read: ret 6 buf a6: 32 31 20 34 34 >21 44<
24.551909 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
24.572886 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.076066 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
26.076783 [D1] interrupt read error: Operation timed out (-7)
26.076902 [D4] qx_process: failed to preprocess answer [input.voltage]
26.076986 [D4] armac command Q1
26.150104 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
26.171102 [D4] read: ret 6 buf 86: 36 20 30 30 30 >6 000<
26.192136 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
26.213146 [D4] read: ret 6 buf 86: 39 2e 36 20 30 >9.6 0<
26.234145 [D4] read: ret 6 buf a6: 32 30 20 34 39 >20 49<
26.254110 [D4] read: ret 6 buf 86: 2e 39 20 32 2e >.9 2.<
26.275142 [D4] read: ret 6 buf a6: 32 31 20 34 34 >21 44<
26.296117 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
26.317121 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.816256 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
27.816894 [D1] interrupt read error: Operation timed out (-7)
I am not sure the issues are that similar, but it should not hurt to try newer NUT in any case. See e.g. https://github.com/networkupstools/nut/wiki/Building-NUT-for-in%E2%80%90place-upgrades-or-non%E2%80%90disruptive-tests for notes on building a configuration similar to your current (e.g. packaged) installation which you can test right from the build workspace, and if it works - replace the existing setup by make install
.
For context, in #1978 the problem is about vendors being creative with the protocol (something your second post with its "screenshots" probably confirms as a related problem, solved there and included in NUT v2.8.1 release).
Your original post however, about "device busy", is something different. Not sure OTOH why that happens - maybe some udev
rules were not right and USB VID:PID remained occupied by the system or some other program. Maybe the system-started driver instance kept it busy and could not be killed (or was killed and the OS could not reap the resources back somehow)?..
hI jimklimov I have tried to follow your suggestion IURL, but I don't understand what I do.. can you explain me more in details if is possibile? I have follow the chapter Testing with CI helper But when I run the command: sudo ./ci_build.sh inplace this is the result_
WARNING: Did not find any CI_CCACHE_SYMLINKDIR; specify one explicitly if desired
WARNING: TMPDIR not set, trying to guess
Parallel builds would spawn up to 8 jobs (detected 4 CPUs), or peak out at 32.0 system load average
INFO: Detected CI_OS_NAME='debian'
Processing BUILD_TYPE='inplace' ...
Build host settings:
BUILD_TYPE=inplace
CI_BUILDDIR=.
CI_FAILFAST=false
CI_OS_HINT=$'PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"\nNAME="Debian GNU/Linux"\nVERSION_ID="12"\nVERSION="12 (bookworm)"\nVERSION_CODENAME=bookworm\nID=debian\nHOME_URL="https://www.debian.org/"\nSUPPORT_URL="https://www.debian.org/support"\nBUG_REPORT_URL="https://bugs.debian.org/"'
CI_OS_NAME=debian
CI_PARMAKE_VERBOSITY=silent
CI_REQUIRE_GOOD_GITIGNORE=true
CI_SKIP_CHECK=false
CI_TIME=
CI_TRACE=no
MAKE=make
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
if [ "$HAVE_CCACHE" = yes ]; then
if [ x"${CI_CCACHE_STATS_COMPRESSION-}" = xtrue ]; then
echo "WARNING: CCache stats $WHEN build: tool is enabled, but CCACHE_DIR='$CCACHE_DIR' was not found now" 1>&2;
Linux raspberrypi 6.1.0-rpi4-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (2023-10-05) aarch64 GNU/Linux
LONG_BIT:64 WORD_BIT:32
Endianness: LE
ERROR: No BUILD_TYPE was specified, doing a minimal default ritual without any required options
/tmp/nut /tmp/nut
/tmp/nut
configure: error: cannot find required auxiliary files: ar-lib missing install-sh config.guess config.sub
instead this is the result of dmesg command,
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.1.0-rpi4-rpi-v8 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (2023-10-05)
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000000dc00000, size 512 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] percpu: Embedded 29 pages/cpu s79144 r8192 d31448 u118784
[ 0.000000] pcpu-alloc: s79144 r8192 d31448 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 496944
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:67:42:D0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=8cde1d42-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 1347208K/2019328K available (12352K kernel code, 2172K rwdata, 4164K rodata, 4224K init, 1082K bss, 147832K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 40047 entries in 157 pages
[ 0.000000] ftrace: allocated 157 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000335] Console: colour dummy device 80x25
[ 0.000394] printk: console [tty1] enabled
[ 0.000454] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000481] pid_max: default: 32768 minimum: 301
[ 0.000603] LSM: Security Framework initializing
[ 0.000805] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000851] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002181] cgroup: Disabling memory control group subsystem
[ 0.004464] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004481] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.004664] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004677] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.004855] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004868] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005331] rcu: Hierarchical SRCU implementation.
[ 0.005344] rcu: Max phase no-delay instances is 1000.
[ 0.007520] EFI services will not be available.
[ 0.008108] smp: Bringing up secondary CPUs ...
[ 0.009205] Detected PIPT I-cache on CPU1
[ 0.009360] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.010523] Detected PIPT I-cache on CPU2
[ 0.010640] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.011779] Detected PIPT I-cache on CPU3
[ 0.011899] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.012076] smp: Brought up 1 node, 4 CPUs
[ 0.012098] SMP: Total of 4 processors activated.
[ 0.012111] CPU features: detected: 32-bit EL0 Support
[ 0.012121] CPU features: detected: 32-bit EL1 Support
[ 0.012134] CPU features: detected: CRC32 instructions
[ 0.012272] CPU: All CPU(s) started at EL2
[ 0.012296] alternatives: applying system-wide alternatives
[ 0.014130] devtmpfs: initialized
[ 0.026129] Enabled cp15_barrier support
[ 0.026172] Enabled setend support
[ 0.026407] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.026444] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.041051] pinctrl core: initialized pinctrl subsystem
[ 0.041970] DMI not present or invalid.
[ 0.042634] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.046258] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.046573] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.047565] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.047659] audit: initializing netlink subsys (disabled)
[ 0.047936] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.048609] thermal_sys: Registered thermal governor 'step_wise'
[ 0.048698] cpuidle: using governor menu
[ 0.048979] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.049179] ASID allocator initialised with 32768 entries
[ 0.050116] Serial: AMBA PL011 UART driver
[ 0.064791] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.088307] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16, variant start
[ 0.092320] raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7
[ 0.108752] KASLR enabled
[ 0.142951] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.148593] iommu: Default domain type: Translated
[ 0.148610] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.149071] SCSI subsystem initialized
[ 0.149314] usbcore: registered new interface driver usbfs
[ 0.149372] usbcore: registered new interface driver hub
[ 0.149442] usbcore: registered new device driver usb
[ 0.149860] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.150433] pps_core: LinuxPPS API ver. 1 registered
[ 0.150447] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.150473] PTP clock support registered
[ 0.151645] vgaarb: loaded
[ 0.152294] clocksource: Switched to clocksource arch_sys_counter
[ 0.152977] VFS: Disk quotas dquot_6.6.0
[ 0.153057] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.153254] FS-Cache: Loaded
[ 0.153427] CacheFiles: Loaded
[ 0.163770] NET: Registered PF_INET protocol family
[ 0.164517] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.167495] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.167540] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.167567] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.167704] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.168222] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.168676] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.168794] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.168844] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.169118] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.169890] RPC: Registered named UNIX socket transport module.
[ 0.169906] RPC: Registered udp transport module.
[ 0.169916] RPC: Registered tcp transport module.
[ 0.169927] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.169952] PCI: CLS 0 bytes, default 64
[ 0.170569] Trying to unpack rootfs image as initramfs...
[ 0.182651] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.183101] kvm [1]: IPA Size Limit: 44 bits
[ 0.184732] kvm [1]: vgic interrupt IRQ9
[ 0.184991] kvm [1]: Hyp mode initialized successfully
[ 1.066119] Freeing initrd memory: 16720K
[ 1.251613] Initialise system trusted keyrings
[ 1.252182] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.259892] zbud: loaded
[ 1.262846] NFS: Registering the id_resolver key type
[ 1.262893] Key type id_resolver registered
[ 1.262905] Key type id_legacy registered
[ 1.263019] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.263036] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.264545] Key type asymmetric registered
[ 1.264566] Asymmetric key parser 'x509' registered
[ 1.264659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.264963] io scheduler mq-deadline registered
[ 1.264981] io scheduler kyber registered
[ 1.267991] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 27)
[ 1.279768] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.279812] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.279904] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.279995] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[ 1.280562] brcm-pcie fd500000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[ 1.281083] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.281103] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.281122] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.281203] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.281479] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.285337] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.285607] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 1.285799] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 1.285911] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 1.394403] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.394573] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.394704] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.395197] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.404435] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.404483] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.404507] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.404588] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.404612] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.405065] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.405303] pcieport 0000:00:00.0: PME: Signaling with IRQ 31
[ 1.405832] pcieport 0000:00:00.0: AER: enabled with IRQ 31
[ 1.406480] brcm-pcie fd500000.pcie: clkreq control enabled
[ 1.423226] iproc-rng200 fe104000.rng: hwrng registered
[ 1.423828] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.438718] brd: module loaded
[ 1.447716] loop: module loaded
[ 1.448765] Loading iSCSI transport class v2.0-870.
[ 1.454883] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.552459] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.553646] usbcore: registered new interface driver r8152
[ 1.553720] usbcore: registered new interface driver lan78xx
[ 1.553779] usbcore: registered new interface driver smsc95xx
[ 1.601768] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.601811] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.602543] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0b00040000000890
[ 1.603672] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.603695] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.603719] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.604101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.604121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.604137] usb usb1: Product: xHCI Host Controller
[ 1.604151] usb usb1: Manufacturer: Linux 6.1.0-rpi4-rpi-v8 xhci-hcd
[ 1.604164] usb usb1: SerialNumber: 0000:01:00.0
[ 1.604976] hub 1-0:1.0: USB hub found
[ 1.605045] hub 1-0:1.0: 1 port detected
[ 1.606003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.606024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.606039] usb usb2: Product: xHCI Host Controller
[ 1.606053] usb usb2: Manufacturer: Linux 6.1.0-rpi4-rpi-v8 xhci-hcd
[ 1.606066] usb usb2: SerialNumber: 0000:01:00.0
[ 1.606738] hub 2-0:1.0: USB hub found
[ 1.606832] hub 2-0:1.0: 4 ports detected
[ 1.608722] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.609082] dwc_otg: FIQ enabled
[ 1.609093] dwc_otg: NAK holdoff enabled
[ 1.609103] dwc_otg: FIQ split-transaction FSM enabled
[ 1.609120] Module dwc_common_port init
[ 1.610502] usbcore: registered new interface driver uas
[ 1.610599] usbcore: registered new interface driver usb-storage
[ 1.611583] mousedev: PS/2 mouse device common for all mice
[ 1.619706] sdhci: Secure Digital Host Controller Interface driver
[ 1.619726] sdhci: Copyright(c) Pierre Ossman
[ 1.620486] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.624621] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.624994] hid: raw HID events driver (C) Jiri Kosina
[ 1.625223] usbcore: registered new interface driver usbhid
[ 1.625237] usbhid: USB HID core driver
[ 1.636002] NET: Registered PF_PACKET protocol family
[ 1.636144] Key type dns_resolver registered
[ 1.637453] registered taskstats version 1
[ 1.637542] Loading compiled-in X.509 certificates
[ 1.666358] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.666476] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 1.667404] Key type .fscrypt registered
[ 1.667419] Key type fscrypt-provisioning registered
[ 1.683232] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.684115] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.684355] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ 1.684627] serial serial0: tty port ttyAMA1 registered
[ 1.694287] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.694783] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.696463] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.696486] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.727246] of_cfs_init
[ 1.727384] of_cfs_init: OK
[ 1.761066] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.770598] Freeing unused kernel memory: 4224K
[ 1.770821] Run /init as init process
[ 1.770833] with arguments:
[ 1.770842] /init
[ 1.770852] splash
[ 1.770862] with environment:
[ 1.770871] HOME=/
[ 1.770880] TERM=linux
[ 1.812708] mmc1: new high speed SDIO card at address 0001
[ 1.860356] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.861396] mmc0: new ultra high speed DDR50 SDHC card at address 5048
[ 1.862534] mmcblk0: mmc0:5048 SD32G 29.7 GiB
[ 1.866041] mmcblk0: p1 p2
[ 1.866749] mmcblk0: mmc0:5048 SD32G 29.7 GiB (quirks 0x00004000)
[ 2.018930] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 2.018968] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.018985] usb 1-1: Product: USB2.0 Hub
[ 2.022604] hub 1-1:1.0: USB hub found
[ 2.022914] hub 1-1:1.0: 4 ports detected
[ 2.316358] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
[ 2.429227] usb 1-1.1: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 2.429264] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.429281] usb 1-1.1: Product: STD UPS MON V2.0
[ 2.429296] usb 1-1.1: SerialNumber: J9552E6E43FBC05
[ 2.441576] hid-generic 0003:0925:1234.0001: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.1/input0
[ 2.726631] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 2.727618] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 2.750161] usb 1-1.1: USB disconnect, device number 3
[ 2.878346] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 2.886037] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 2.889253] Registered IR keymap rc-cec
[ 2.889440] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 2.889664] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 2.893482] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 2.896705] Registered IR keymap rc-cec
[ 2.896893] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 2.897094] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 2.901390] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 2.902117] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 2.902590] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.903064] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.903530] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.903845] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.904368] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.908612] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 2.909654] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 2.916353] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 2.916525] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 2.976348] usb 1-1.1: new full-speed USB device number 4 using xhci_hcd
[ 3.085586] usb 1-1.1: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 3.085625] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.085642] usb 1-1.1: Product: STD UPS MON V2.0
[ 3.085658] usb 1-1.1: SerialNumber: J9552E6E43FBC05
[ 3.099843] hid-generic 0003:0925:1234.0002: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.1/input0
[ 3.395873] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 4.060619] systemd[1]: System time before build time, advancing clock.
[ 4.238725] NET: Registered PF_INET6 protocol family
[ 4.240574] Segment Routing with IPv6
[ 4.240620] In-situ OAM (IOAM) with IPv6
[ 4.318136] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.318191] systemd[1]: Detected architecture arm64.
[ 4.328471] systemd[1]: Hostname set to <raspberrypi>.
[ 4.542456] usb 1-1.1: USB disconnect, device number 4
[ 4.768382] usb 1-1.1: new full-speed USB device number 5 using xhci_hcd
[ 4.881225] usb 1-1.1: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 4.881262] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 4.881279] usb 1-1.1: Product: STD UPS MON V2.0
[ 4.881293] usb 1-1.1: SerialNumber: J9552E6E43FBC05
[ 4.893342] hid-generic 0003:0925:1234.0003: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.1/input0
[ 5.291712] systemd[1]: Queued start job for default target graphical.target.
[ 5.316598] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 5.318535] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 5.320041] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver.
[ 5.321624] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 5.322701] systemd[1]: Created slice user.slice - User and Session Slice.
[ 5.323305] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 5.324537] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 5.324872] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 5.325096] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 5.325333] systemd[1]: Reached target slices.target - Slice Units.
[ 5.325481] systemd[1]: Reached target swap.target - Swaps.
[ 5.325660] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 5.326660] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 5.327118] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 5.329131] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 5.330167] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 5.331287] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 5.333467] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 5.334409] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 5.335471] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 5.360848] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 5.366619] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 5.372653] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 5.373483] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 5.382422] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 5.388453] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 5.394871] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 5.401818] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 5.409105] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 5.416607] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 5.424123] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 5.435230] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 5.442463] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 5.443844] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 5.456857] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 5.473246] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 5.479659] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 5.488057] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 5.514735] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 5.516426] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 5.516558] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 5.518322] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 5.521309] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 5.533647] fuse: init (API version 7.37)
[ 5.542230] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.543521] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 5.546793] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 5.550377] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 5.551653] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 5.554655] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.555830] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 5.558519] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 5.559829] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 5.562645] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.563858] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 5.566720] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 5.567860] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 5.587580] i2c_dev: i2c /dev entries driver
[ 5.601361] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 5.609969] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 5.610819] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 5.620450] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 5.628737] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 5.641315] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 5.643225] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 5.650582] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.650889] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 5.673488] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 5.679614] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 5.690812] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 5.693353] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 5.742534] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 5.744246] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.777869] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 5.817391] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 5.845490] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 5.846913] systemd[1]: Started systemd-journald.service - Journal Service.
[ 5.917758] systemd-journald[267]: Received client request to flush runtime journal.
[ 5.925308] systemd-journald[267]: File /var/log/journal/55a96178d2d54848b58de36a92a5e3af/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.334638] usb 1-1.1: USB disconnect, device number 5
[ 6.564436] usb 1-1.1: new full-speed USB device number 6 using xhci_hcd
[ 6.688177] usb 1-1.1: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 6.688217] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 6.688235] usb 1-1.1: Product: STD UPS MON V2.0
[ 6.688250] usb 1-1.1: SerialNumber: J9552E6E43FBC05
[ 6.755702] hid-generic 0003:0925:1234.0004: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.1/input0
[ 7.161631] mc: Linux media interface: v0.10
[ 7.208998] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.225718] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.227787] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 7.227825] [vc_sm_connected_init]: start
[ 7.232693] rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000
[ 7.241157] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 7.248925] rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem
[ 7.257473] [vc_sm_connected_init]: installed successfully
[ 7.312402] videodev: Linux video capture interface: v2.00
[ 7.389721] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.422390] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.465552] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.510669] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 7.515030] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.516452] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 7.518162] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 7.524448] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 7.524500] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 7.524526] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 7.524546] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 7.524584] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 7.536428] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 7.540520] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 7.544438] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 7.544994] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 7.545035] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 7.545060] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 7.545096] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 7.545115] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 7.545402] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 7.546615] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.582577] rpivid feb10000.codec: Device registered as /dev/video19
[ 7.588450] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 7.588537] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 7.621972] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 7.622039] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 7.648525] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 7.648588] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 7.674108] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 7.674170] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 7.707297] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 7.707366] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 7.821233] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.822310] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 7.823349] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 7.825422] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.830702] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 7.831638] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 7.970164] Bluetooth: Core ver 2.22
[ 7.982560] NET: Registered PF_BLUETOOTH protocol family
[ 7.982591] Bluetooth: HCI device and connection manager initialized
[ 7.982625] Bluetooth: HCI socket layer initialized
[ 7.982648] Bluetooth: L2CAP socket layer initialized
[ 7.982703] Bluetooth: SCO socket layer initialized
[ 8.018615] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 8.042760] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.043767] usbcore: registered new interface driver brcmfmac
[ 8.050946] Bluetooth: HCI UART driver ver 2.3
[ 8.050984] Bluetooth: HCI UART protocol H4 registered
[ 8.064376] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 8.066128] Bluetooth: HCI UART protocol Broadcom registered
[ 8.067143] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 8.067584] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 8.070148] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin
[ 8.071491] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[ 8.072471] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.clm_blob
[ 8.127041] usb 1-1.1: USB disconnect, device number 6
[ 8.184882] uart-pl011 fe201000.serial: no DMA platform data
[ 8.352428] usb 1-1.1: new full-speed USB device number 7 using xhci_hcd
[ 8.376646] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 8.471434] usb 1-1.1: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 8.471473] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 8.471491] usb 1-1.1: Product: STD UPS MON V2.0
[ 8.471507] usb 1-1.1: SerialNumber: J9552E6E43FBC05
[ 8.481223] Bluetooth: hci0: BCM: chip id 107
[ 8.481678] Bluetooth: hci0: BCM: features 0x2f
[ 8.482924] Bluetooth: hci0: BCM4345C0
[ 8.482953] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 8.484849] hid-generic 0003:0925:1234.0005: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.1/input0
[ 8.605454] bluetooth hci0: firmware: direct-loading firmware brcm/BCM4345C0.raspberrypi,4-model-b.hcd
[ 8.605499] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,4-model-b.hcd' Patch
[ 9.397676] Bluetooth: hci0: BCM: features 0x2f
[ 9.399318] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 9.399354] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 9.919260] usb 1-1.1: USB disconnect, device number 7
[ 10.160390] usb 1-1.1: new full-speed USB device number 8 using xhci_hcd
[ 10.269441] usb 1-1.1: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 10.269481] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 10.269499] usb 1-1.1: Product: STD UPS MON V2.0
[ 10.269514] usb 1-1.1: SerialNumber: J9552E6E43FBC05
[ 10.292250] hid-generic 0003:0925:1234.0006: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.1/input0
[ 10.865514] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 11.830110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.830147] Bluetooth: BNEP filters: protocol multicast
[ 11.830181] Bluetooth: BNEP socket layer initialized
[ 11.849391] Bluetooth: MGMT ver 1.22
[ 11.891692] NET: Registered PF_ALG protocol family
[ 12.396759] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 12.400142] bcmgenet fd580000.ethernet eth0: Link is Down
[ 12.436630] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 14.709310] Bluetooth: RFCOMM TTY layer initialized
[ 14.709339] Bluetooth: RFCOMM socket layer initialized
[ 14.709362] Bluetooth: RFCOMM ver 1.11
[ 15.464457] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.464810] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 622.364966] usb 1-1.1: USB disconnect, device number 8
[ 625.244610] usb 1-1.4: new full-speed USB device number 9 using xhci_hcd
[ 625.353368] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 625.353379] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 625.353384] usb 1-1.4: Product: STD UPS MON V2.0
[ 625.353390] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 625.364534] hid-generic 0003:0925:1234.0007: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
[ 626.702458] usb 1-1.4: USB disconnect, device number 9
[ 626.928656] usb 1-1.4: new full-speed USB device number 10 using xhci_hcd
[ 627.037506] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 627.037523] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 627.037529] usb 1-1.4: Product: STD UPS MON V2.0
[ 627.037534] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 627.048673] hid-generic 0003:0925:1234.0008: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
It seems you did not follow the config prerequisites chapter to install the build tools etc.?
Assuming a Debian derived OS, check this list: https://networkupstools.org/docs/user-manual.chunked/_build_prerequisites_to_make_nut_from_scratch_on_various_operating_systems.html#_debian_10_11
OK I have follow the url, thank... but If now I run command from /tmp/ directory:
sudo ./drivers/nutdrv_qx -a vultech
Network UPS Tools - Generic Q* Serial driver 0.36 (2.8.1-31-ge451a97bc)
Fatal error: 'vendorid' is not a valid variable name for this driver.
Look in the man page or call this driver with -h for a list of
valid variable names and flags.
upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it
That's strange :\ Did you get libusb dev libraries+headers package? Is USB support reported as enabled after NUT configuration?
"No notification tech" suggests you lack libsystemd-dev too?
Ok now I have redone all steps...and I'm occur in the problem Resource busy .. argggggh
sudo ./drivers/nutdrv_qx -s tempups -d1 -DDDDDD -x port=auto -x vendorid=0925 -x productid=1234 -x subdriver=armac
Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.1-35-g8c913eda4)
USB communication driver (libusb 1.0) 0.46
0.000000 [D3] main_arg: var='port' val='auto'
0.000105 [D6] testinfo_reloadable: var=port, infoname=driver.parameter.port, newval=auto, reloadable=0, reload_flag=0
0.000162 [D6] testinfo_reloadable: verdict for (re)loading var=port value: 1
0.000219 [D5] send_to_all: SETINFO driver.parameter.port "auto"
0.000303 [D3] main_arg: var='vendorid' val='0925'
0.000369 [D5] send_to_all: SETINFO driver.parameter.vendorid "0925"
0.000424 [D3] main_arg: var='productid' val='1234'
0.000499 [D5] send_to_all: SETINFO driver.parameter.productid "1234"
0.000552 [D3] main_arg: var='subdriver' val='armac'
0.000610 [D5] send_to_all: SETINFO driver.parameter.subdriver "armac"
0.000662 [D1] Network UPS Tools version 2.8.1-35-g8c913eda4 (release/snapshot of 2.8.1.1) built with gcc (Debian 12.2.0-14) 12.2.0 and configured with flags: --prefix=/usr --sbindir=/usr/sbin --bindir=/usr/bin --sysconfdir=/etc/nut --with-group=nut --with-user=nut --enable-Wcolor --enable-warnings --enable-Werror --enable-keep_nut_report_feature --with-all=auto --with-cgi=auto --with-serial=auto --with-dev=auto --with-doc=skip --with-nut_monitor=auto --with-pynut=auto --disable-force-nut-version-header --enable-check-NIT --enable-maintainer-mode
0.000747 [D1] debug level is '6'
0.000799 [D5] send_to_all: SETINFO driver.debug "6"
0.000852 [D5] send_to_all: SETFLAGS driver.debug RW NUMBER
0.002153 [D1] Succeeded to become_user(nut): now UID=112 GID=122
0.002230 [D5] send_to_all: SETINFO device.type "ups"
0.002285 [D5] send_to_all: SETINFO driver.state "init.device"
0.002334 [D1] upsdrv_initups...
0.027277 [D2] Checking device 1 of 4 (1D6B/0003)
0.027451 [D1] Failed to open device (1D6B/0003), skipping: Access denied (insufficient permissions)
0.027510 [D2] Checking device 2 of 4 (0925/1234)
0.036862 [D2] - VendorID: 0925
0.036925 [D2] - ProductID: 1234
0.036974 [D2] - Manufacturer: unknown
0.037021 [D2] - Product: STD UPS MON V2.0
0.037068 [D2] - Serial Number: J9552E6E43FBC05
0.037115 [D2] - Bus: 001
0.037161 [D2] - Bus Port: 004
0.037210 [D2] - Device: 008
0.037256 [D2] - Device release number: 0001
0.037302 [D2] Trying to match device
0.037351 [D3] match_function_regex: matching a device...
0.037526 [D2] Device matches
0.037577 [D2] Reading configuration descriptor 1 of 1
0.037655 [D3] libusb_kernel_driver_active() returned 0: Success
0.037719 [D2] failed to claim USB device: Resource busy
0.037785 [D2] Kernel driver already detached
0.037841 [D2] failed to claim USB device: Resource busy
0.037897 [D2] Kernel driver already detached
0.037952 [D2] failed to claim USB device: Resource busy
0.038008 [D2] Kernel driver already detached
0.038064 [D2] failed to claim USB device: Resource busy
0.038124 [D2] Kernel driver already detached
0.038183 Can't claim USB device [0925:1234]@0/0/0: Entity not found
0.038250 [D5] send_to_all: SETINFO driver.state "cleanup.exit"
This is the result of dmesg , do you have any suggestion for me?
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.1.0-rpi4-rpi-v8 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (2023-10-05)
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000000dc00000, size 512 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] percpu: Embedded 29 pages/cpu s79144 r8192 d31448 u118784
[ 0.000000] pcpu-alloc: s79144 r8192 d31448 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 496944
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:67:42:D0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=8cde1d42-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 1347208K/2019328K available (12352K kernel code, 2172K rwdata, 4164K rodata, 4224K init, 1082K bss, 147832K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 40047 entries in 157 pages
[ 0.000000] ftrace: allocated 157 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000332] Console: colour dummy device 80x25
[ 0.000390] printk: console [tty1] enabled
[ 0.000447] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000474] pid_max: default: 32768 minimum: 301
[ 0.000592] LSM: Security Framework initializing
[ 0.000787] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000830] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002104] cgroup: Disabling memory control group subsystem
[ 0.004296] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004312] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.004489] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004502] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.004672] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004684] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005127] rcu: Hierarchical SRCU implementation.
[ 0.005139] rcu: Max phase no-delay instances is 1000.
[ 0.007278] EFI services will not be available.
[ 0.007792] smp: Bringing up secondary CPUs ...
[ 0.008877] Detected PIPT I-cache on CPU1
[ 0.009029] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.010139] Detected PIPT I-cache on CPU2
[ 0.010257] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.011341] Detected PIPT I-cache on CPU3
[ 0.011460] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.011603] smp: Brought up 1 node, 4 CPUs
[ 0.011624] SMP: Total of 4 processors activated.
[ 0.011636] CPU features: detected: 32-bit EL0 Support
[ 0.011645] CPU features: detected: 32-bit EL1 Support
[ 0.011658] CPU features: detected: CRC32 instructions
[ 0.011790] CPU: All CPU(s) started at EL2
[ 0.011813] alternatives: applying system-wide alternatives
[ 0.013617] devtmpfs: initialized
[ 0.025459] Enabled cp15_barrier support
[ 0.025500] Enabled setend support
[ 0.025727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.025765] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.039317] pinctrl core: initialized pinctrl subsystem
[ 0.040212] DMI not present or invalid.
[ 0.040922] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.044316] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.044624] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.045593] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.045688] audit: initializing netlink subsys (disabled)
[ 0.045951] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[ 0.046580] thermal_sys: Registered thermal governor 'step_wise'
[ 0.046665] cpuidle: using governor menu
[ 0.046943] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.047137] ASID allocator initialised with 32768 entries
[ 0.048067] Serial: AMBA PL011 UART driver
[ 0.062063] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.085005] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16, variant start
[ 0.089018] raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7
[ 0.104864] KASLR enabled
[ 0.138358] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.143731] iommu: Default domain type: Translated
[ 0.143747] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.144198] SCSI subsystem initialized
[ 0.144433] usbcore: registered new interface driver usbfs
[ 0.144490] usbcore: registered new interface driver hub
[ 0.144555] usbcore: registered new device driver usb
[ 0.144945] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.145504] pps_core: LinuxPPS API ver. 1 registered
[ 0.145517] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.145543] PTP clock support registered
[ 0.146690] vgaarb: loaded
[ 0.147279] clocksource: Switched to clocksource arch_sys_counter
[ 0.148217] VFS: Disk quotas dquot_6.6.0
[ 0.148293] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.148482] FS-Cache: Loaded
[ 0.148663] CacheFiles: Loaded
[ 0.158825] NET: Registered PF_INET protocol family
[ 0.159237] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.162263] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.162305] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.162331] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.162457] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.162972] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.163408] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.163530] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.163577] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.163844] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.164598] RPC: Registered named UNIX socket transport module.
[ 0.164614] RPC: Registered udp transport module.
[ 0.164625] RPC: Registered tcp transport module.
[ 0.164634] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.164658] PCI: CLS 0 bytes, default 64
[ 0.165175] Trying to unpack rootfs image as initramfs...
[ 0.185550] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.186008] kvm [1]: IPA Size Limit: 44 bits
[ 0.187518] kvm [1]: vgic interrupt IRQ9
[ 0.187756] kvm [1]: Hyp mode initialized successfully
[ 1.060802] Freeing initrd memory: 16720K
[ 1.235856] Initialise system trusted keyrings
[ 1.236390] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.244018] zbud: loaded
[ 1.246940] NFS: Registering the id_resolver key type
[ 1.246979] Key type id_resolver registered
[ 1.246991] Key type id_legacy registered
[ 1.247104] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.247120] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.248613] Key type asymmetric registered
[ 1.248633] Asymmetric key parser 'x509' registered
[ 1.248723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.249000] io scheduler mq-deadline registered
[ 1.249017] io scheduler kyber registered
[ 1.251964] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 27)
[ 1.262995] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.263038] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.263125] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.263211] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[ 1.263799] brcm-pcie fd500000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[ 1.264303] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.264323] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.264341] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.264420] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.264680] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.268534] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.268794] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 1.268999] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 1.269101] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 1.377387] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.377554] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.377681] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.378164] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.387391] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.387439] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.387463] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.387542] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.387566] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.387995] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.388223] pcieport 0000:00:00.0: PME: Signaling with IRQ 31
[ 1.388742] pcieport 0000:00:00.0: AER: enabled with IRQ 31
[ 1.389366] brcm-pcie fd500000.pcie: clkreq control enabled
[ 1.405406] iproc-rng200 fe104000.rng: hwrng registered
[ 1.405975] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.420579] brd: module loaded
[ 1.429445] loop: module loaded
[ 1.430376] Loading iSCSI transport class v2.0-870.
[ 1.436378] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.543436] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.544618] usbcore: registered new interface driver r8152
[ 1.544690] usbcore: registered new interface driver lan78xx
[ 1.544748] usbcore: registered new interface driver smsc95xx
[ 1.592661] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.592705] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.593410] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0b00040000000890
[ 1.594512] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.594535] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.594558] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.594936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.594956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.594971] usb usb1: Product: xHCI Host Controller
[ 1.594984] usb usb1: Manufacturer: Linux 6.1.0-rpi4-rpi-v8 xhci-hcd
[ 1.594997] usb usb1: SerialNumber: 0000:01:00.0
[ 1.595785] hub 1-0:1.0: USB hub found
[ 1.595853] hub 1-0:1.0: 1 port detected
[ 1.596764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.596784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.596799] usb usb2: Product: xHCI Host Controller
[ 1.596811] usb usb2: Manufacturer: Linux 6.1.0-rpi4-rpi-v8 xhci-hcd
[ 1.596824] usb usb2: SerialNumber: 0000:01:00.0
[ 1.597477] hub 2-0:1.0: USB hub found
[ 1.597541] hub 2-0:1.0: 4 ports detected
[ 1.599361] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.599696] dwc_otg: FIQ enabled
[ 1.599707] dwc_otg: NAK holdoff enabled
[ 1.599717] dwc_otg: FIQ split-transaction FSM enabled
[ 1.599733] Module dwc_common_port init
[ 1.601071] usbcore: registered new interface driver uas
[ 1.601166] usbcore: registered new interface driver usb-storage
[ 1.602091] mousedev: PS/2 mouse device common for all mice
[ 1.609832] sdhci: Secure Digital Host Controller Interface driver
[ 1.609852] sdhci: Copyright(c) Pierre Ossman
[ 1.610528] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.614538] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.614912] hid: raw HID events driver (C) Jiri Kosina
[ 1.615113] usbcore: registered new interface driver usbhid
[ 1.615127] usbhid: USB HID core driver
[ 1.625374] NET: Registered PF_PACKET protocol family
[ 1.625496] Key type dns_resolver registered
[ 1.626766] registered taskstats version 1
[ 1.626851] Loading compiled-in X.509 certificates
[ 1.654913] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.655030] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 1.656129] Key type .fscrypt registered
[ 1.656144] Key type fscrypt-provisioning registered
[ 1.671549] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.672398] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.672563] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ 1.672813] serial serial0: tty port ttyAMA1 registered
[ 1.682240] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.682715] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.684325] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.684348] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.712882] of_cfs_init
[ 1.713026] of_cfs_init: OK
[ 1.747428] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.756489] Freeing unused kernel memory: 4224K
[ 1.756707] Run /init as init process
[ 1.756719] with arguments:
[ 1.756728] /init
[ 1.756738] splash
[ 1.756747] with environment:
[ 1.756756] HOME=/
[ 1.756765] TERM=linux
[ 1.796538] mmc1: new high speed SDIO card at address 0001
[ 1.847409] mmc0: new ultra high speed DDR50 SDHC card at address 5048
[ 1.848551] mmcblk0: mmc0:5048 SD32G 29.7 GiB
[ 1.851351] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.852046] mmcblk0: p1 p2
[ 1.852659] mmcblk0: mmc0:5048 SD32G 29.7 GiB (quirks 0x00004000)
[ 2.001961] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 2.001998] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.002015] usb 1-1: Product: USB2.0 Hub
[ 2.004466] hub 1-1:1.0: USB hub found
[ 2.004719] hub 1-1:1.0: 4 ports detected
[ 2.299334] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
[ 2.408385] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 2.408420] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.408436] usb 1-1.4: Product: STD UPS MON V2.0
[ 2.408450] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 2.420718] hid-generic 0003:0925:1234.0001: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
[ 2.678742] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 2.679662] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 2.733068] usb 1-1.4: USB disconnect, device number 3
[ 2.790706] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 2.851005] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 2.853884] Registered IR keymap rc-cec
[ 2.854060] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 2.854259] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 2.859615] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 2.862471] Registered IR keymap rc-cec
[ 2.862652] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 2.862855] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 2.869654] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 2.870369] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 2.870825] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.871231] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.871741] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.872060] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.872500] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 2.876262] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 2.876942] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 2.883570] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 2.883719] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 2.971342] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
[ 3.080292] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 3.080328] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.080345] usb 1-1.4: Product: STD UPS MON V2.0
[ 3.080359] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 3.093081] hid-generic 0003:0925:1234.0002: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
[ 3.310969] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.957246] systemd[1]: System time before build time, advancing clock.
[ 4.133909] NET: Registered PF_INET6 protocol family
[ 4.135759] Segment Routing with IPv6
[ 4.135801] In-situ OAM (IOAM) with IPv6
[ 4.212720] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.212774] systemd[1]: Detected architecture arm64.
[ 4.223129] systemd[1]: Hostname set to <raspberrypi>.
[ 4.525341] usb 1-1.4: USB disconnect, device number 4
[ 4.755319] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd
[ 4.868271] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 4.868308] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 4.868325] usb 1-1.4: Product: STD UPS MON V2.0
[ 4.868339] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 4.880501] hid-generic 0003:0925:1234.0003: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
[ 5.189257] systemd[1]: Queued start job for default target graphical.target.
[ 5.211619] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 5.213494] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 5.215000] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver.
[ 5.216553] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 5.217617] systemd[1]: Created slice user.slice - User and Session Slice.
[ 5.218215] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 5.219449] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 5.219795] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 5.220024] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 5.220266] systemd[1]: Reached target slices.target - Slice Units.
[ 5.220428] systemd[1]: Reached target swap.target - Swaps.
[ 5.220621] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 5.221546] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 5.221975] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 5.223975] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 5.224978] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 5.226085] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 5.228172] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 5.229142] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 5.230138] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 5.259859] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 5.265386] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 5.271121] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 5.271939] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 5.280712] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 5.286562] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 5.292937] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 5.299665] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 5.306802] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 5.314235] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 5.321718] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 5.328849] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 5.336183] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 5.337406] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 5.349245] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 5.369362] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 5.375969] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 5.382697] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 5.392234] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 5.396618] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 5.398416] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 5.400182] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 5.406826] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 5.410725] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 5.414350] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.416084] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 5.418740] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 5.420580] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 5.423637] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.424966] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 5.428785] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 5.430202] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 5.433255] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 5.434596] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 5.439886] fuse: init (API version 7.37)
[ 5.468344] i2c_dev: i2c /dev entries driver
[ 5.471988] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 5.472796] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 5.476097] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.480239] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 5.483227] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 5.491298] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 5.492573] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 5.499830] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 5.513406] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 5.516262] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 5.517984] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 5.519927] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.520234] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 5.525945] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 5.548683] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 5.628883] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 5.636504] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 5.638261] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 5.675132] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 5.696356] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 5.732726] systemd[1]: Started systemd-journald.service - Journal Service.
[ 5.803138] systemd-journald[266]: Received client request to flush runtime journal.
[ 5.810529] systemd-journald[266]: File /var/log/journal/55a96178d2d54848b58de36a92a5e3af/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.317625] usb 1-1.4: USB disconnect, device number 5
[ 6.571412] usb 1-1.4: new full-speed USB device number 6 using xhci_hcd
[ 6.682330] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 6.682374] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 6.682392] usb 1-1.4: Product: STD UPS MON V2.0
[ 6.682407] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 6.717735] hid-generic 0003:0925:1234.0004: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
[ 6.934949] mc: Linux media interface: v0.10
[ 7.001537] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.006848] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 7.006889] [vc_sm_connected_init]: start
[ 7.010396] rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000
[ 7.015776] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.041686] rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem
[ 7.066494] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 7.068201] videodev: Linux video capture interface: v2.00
[ 7.078274] [vc_sm_connected_init]: installed successfully
[ 7.306072] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.312813] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.354697] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.361738] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.374131] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.397744] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.406806] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 7.406965] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 7.407035] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 7.407810] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 7.411851] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 7.421476] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 7.421538] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 7.424835] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 7.424884] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 7.424908] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 7.424928] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 7.424946] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 7.429904] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 7.429986] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 7.438548] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 7.441719] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 7.441743] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 7.441784] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 7.445964] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 7.446301] rpivid feb10000.codec: Device registered as /dev/video19
[ 7.446830] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 7.446909] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 7.446934] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 7.446952] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 7.446970] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 7.447488] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 7.447990] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 7.448041] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 7.549921] Bluetooth: Core ver 2.22
[ 7.550078] NET: Registered PF_BLUETOOTH protocol family
[ 7.550091] Bluetooth: HCI device and connection manager initialized
[ 7.550122] Bluetooth: HCI socket layer initialized
[ 7.550143] Bluetooth: L2CAP socket layer initialized
[ 7.550190] Bluetooth: SCO socket layer initialized
[ 7.595427] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.596464] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 7.607676] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 7.608718] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.618894] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 7.623695] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 7.627453] Bluetooth: HCI UART driver ver 2.3
[ 7.627489] Bluetooth: HCI UART protocol H4 registered
[ 7.627645] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 7.628088] Bluetooth: HCI UART protocol Broadcom registered
[ 7.629848] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 7.630205] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 7.747794] uart-pl011 fe201000.serial: no DMA platform data
[ 8.016223] Bluetooth: hci0: BCM: chip id 107
[ 8.016662] Bluetooth: hci0: BCM: features 0x2f
[ 8.017893] Bluetooth: hci0: BCM4345C0
[ 8.017921] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 8.024433] bluetooth hci0: firmware: direct-loading firmware brcm/BCM4345C0.raspberrypi,4-model-b.hcd
[ 8.024471] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,4-model-b.hcd' Patch
[ 8.069596] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 8.087175] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.095927] usbcore: registered new interface driver brcmfmac
[ 8.109919] usb 1-1.4: USB disconnect, device number 6
[ 8.119949] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin
[ 8.121225] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[ 8.122254] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.clm_blob
[ 8.339352] usb 1-1.4: new full-speed USB device number 7 using xhci_hcd
[ 8.377024] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 8.450511] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 8.450556] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 8.450572] usb 1-1.4: Product: STD UPS MON V2.0
[ 8.450605] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 8.513231] hid-generic 0003:0925:1234.0005: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
[ 8.848961] Bluetooth: hci0: BCM: features 0x2f
[ 8.851499] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 8.851529] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 9.902364] usb 1-1.4: USB disconnect, device number 7
[ 10.155458] usb 1-1.4: new full-speed USB device number 8 using xhci_hcd
[ 10.267243] usb 1-1.4: New USB device found, idVendor=0925, idProduct=1234, bcdDevice= 0.01
[ 10.267318] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 10.267336] usb 1-1.4: Product: STD UPS MON V2.0
[ 10.267351] usb 1-1.4: SerialNumber: J9552E6E43FBC05
[ 10.285508] hid-generic 0003:0925:1234.0006: hiddev96,hidraw0: USB HID v1.00 Device [STD UPS MON V2.0] on usb-0000:01:00.0-1.4/input0
[ 10.463684] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 11.277774] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.277811] Bluetooth: BNEP filters: protocol multicast
[ 11.277845] Bluetooth: BNEP socket layer initialized
[ 11.290321] Bluetooth: MGMT ver 1.22
[ 11.315336] NET: Registered PF_ALG protocol family
[ 11.847186] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 11.850482] bcmgenet fd580000.ethernet eth0: Link is Down
[ 11.886465] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 14.911452] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.911807] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 15.344569] Bluetooth: RFCOMM TTY layer initialized
[ 15.344596] Bluetooth: RFCOMM socket layer initialized
[ 15.344614] Bluetooth: RFCOMM ver 1.11
If I re-run the command in another time seem that this work with 2.8.1 What do you think? I need only solve the problem of Resource busy (It seems that the UPS is constantly connecting and disconnecting....but could it be that I am wrong?)
sudo ./drivers/nutdrv_qx -s tempups -d1 -DDDDDD -x port=auto -x vendorid=0925 -x productid=1234 -x subdriver=armac
Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.1-35-g8c913eda4)
USB communication driver (libusb 1.0) 0.46
0.000000 [D3] main_arg: var='port' val='auto'
0.000153 [D6] testinfo_reloadable: var=port, infoname=driver.parameter.port, newval=auto, reloadable=0, reload_flag=0
0.000210 [D6] testinfo_reloadable: verdict for (re)loading var=port value: 1
0.000265 [D5] send_to_all: SETINFO driver.parameter.port "auto"
0.000350 [D3] main_arg: var='vendorid' val='0925'
0.000414 [D5] send_to_all: SETINFO driver.parameter.vendorid "0925"
0.000468 [D3] main_arg: var='productid' val='1234'
0.000577 [D5] send_to_all: SETINFO driver.parameter.productid "1234"
0.000784 [D3] main_arg: var='subdriver' val='armac'
0.001060 [D5] send_to_all: SETINFO driver.parameter.subdriver "armac"
0.001280 [D1] Network UPS Tools version 2.8.1-35-g8c913eda4 (release/snapshot of 2.8.1.1) built with gcc (Debian 12.2.0-14) 12.2.0 and configured with flags: --prefix=/usr --sbindir=/usr/sbin --bindir=/usr/bin --sysconfdir=/etc/nut --with-group=nut --with-user=nut --enable-Wcolor --enable-warnings --enable-Werror --enable-keep_nut_report_feature --with-all=auto --with-cgi=auto --with-serial=auto --with-dev=auto --with-doc=skip --with-nut_monitor=auto --with-pynut=auto --disable-force-nut-version-header --enable-check-NIT --enable-maintainer-mode
0.001700 [D1] debug level is '6'
0.001908 [D5] send_to_all: SETINFO driver.debug "6"
0.002115 [D5] send_to_all: SETFLAGS driver.debug RW NUMBER
0.003651 [D1] Succeeded to become_user(nut): now UID=112 GID=122
0.003728 [D5] send_to_all: SETINFO device.type "ups"
0.003783 [D5] send_to_all: SETINFO driver.state "init.device"
0.003871 [D1] upsdrv_initups...
0.028964 [D2] Checking device 1 of 4 (1D6B/0003)
0.029277 [D1] Failed to open device (1D6B/0003), skipping: Access denied (insufficient permissions)
0.029487 [D2] Checking device 2 of 4 (0925/1234)
0.038016 [D2] - VendorID: 0925
0.038201 [D2] - ProductID: 1234
0.038349 [D2] - Manufacturer: unknown
0.038399 [D2] - Product: STD UPS MON V2.0
0.038475 [D2] - Serial Number: J9552E6E43FBC05
0.038674 [D2] - Bus: 001
0.038811 [D2] - Bus Port: 004
0.038901 [D2] - Device: 008
0.038951 [D2] - Device release number: 0001
0.038997 [D2] Trying to match device
0.039075 [D3] match_function_regex: matching a device...
0.039551 [D2] Device matches
0.039632 [D2] Reading configuration descriptor 1 of 1
0.039744 [D3] libusb_kernel_driver_active() returned 0: Success
0.040147 [D2] Claimed interface 0 successfully
0.040427 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0)
0.040540 [D5] send_to_all: SETINFO ups.vendorid "0925"
0.040672 [D5] send_to_all: SETINFO ups.productid "1234"
0.040925 [D2] armac: unsupported cmd: QGS
0.041160 [D2] qx_process_answer: short reply (input.voltage)
0.041409 [D2] armac: unsupported cmd: QGS
0.041603 [D2] qx_process_answer: short reply (input.voltage)
0.041778 [D2] armac: unsupported cmd: QGS
0.042038 [D2] qx_process_answer: short reply (input.voltage)
0.042120 [D2] armac: unsupported cmd: M
0.042174 [D2] voltronic_qs_protocol: invalid protocol [M]
0.042224 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.042274 [D2] armac: unsupported cmd: M
0.042404 [D2] voltronic_qs_protocol: invalid protocol [M]
0.042623 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.042679 [D2] armac: unsupported cmd: M
0.042782 [D2] voltronic_qs_protocol: invalid protocol [M]
0.042998 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.043255 [D2] armac: unsupported cmd: M
0.043480 [D2] voltronic_qs_hex_protocol: invalid protocol [M]
0.043598 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.043652 [D2] armac: unsupported cmd: M
0.043704 [D2] voltronic_qs_hex_protocol: invalid protocol [M]
0.043785 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.044046 [D2] armac: unsupported cmd: M
0.044167 [D2] voltronic_qs_hex_protocol: invalid protocol [M]
0.044218 [D4] ups_infoval_set: failed to preprocess value [ups.firmware.aux: M]
0.044270 [D2] armac: unsupported cmd: QS
0.044349 [D2] qx_process_answer: short reply (input.voltage)
0.044533 [D2] armac: unsupported cmd: QS
0.044586 [D2] qx_process_answer: short reply (input.voltage)
0.044636 [D2] armac: unsupported cmd: QS
0.044715 [D2] qx_process_answer: short reply (input.voltage)
0.044837 [D2] armac: unsupported cmd: D
0.044976 [D2] qx_process_answer: short reply (input.voltage)
0.045072 [D2] armac: unsupported cmd: D
0.045124 [D2] qx_process_answer: short reply (input.voltage)
0.045268 [D2] armac: unsupported cmd: D
0.045408 [D2] qx_process_answer: short reply (input.voltage)
0.045462 [D4] armac command Q1
0.227483 [D4] read: ret 6 buf a6: 28 32 34 30 2e >(240.<
0.248483 [D4] read: ret 6 buf 86: 34 20 30 30 30 >4 000<
0.269482 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
0.290480 [D4] read: ret 6 buf 86: 39 2e 39 20 30 >9.9 0<
0.311485 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
0.332485 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
0.352489 [D4] read: ret 6 buf a6: 32 33 20 34 33 >23 43<
0.373491 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
0.394494 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.894590 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
0.894622 [D3] trailing bytes in serial transmission found: 2 copied out of 3
0.894640 [D3] armac command Q1 response read: '(240.4 000.0 219.9 020 50.0 2.23 43.0 00000001'
0.894684 [D5] send_to_all: SETINFO input.voltage "240.4"
0.894722 [D4] armac command ID
0< 1.560658 [D4] read: ret 6 buf a5: 4e 41 4b 0d 30 >NAK
1.560688 [D3] trailing bytes in serial transmission found: 4 copied out of 5
1.560705 [D3] armac command ID response read: 'NAK'
1.560723 [D4] bestups_preprocess_id_answer: wrong length [device.model: 4]
1.560740 [D4] qx_process: failed to preprocess answer [device.model]
1.560772 [D5] send_to_all: DELINFO input.voltage
1.560844 [D4] armac command Q1
1.742679 [D4] read: ret 6 buf 86: 28 32 34 30 2e >(240.<
1.762680 [D4] read: ret 6 buf a6: 30 20 30 30 30 >0 000<
1.783684 [D4] read: ret 6 buf 86: 2e 30 20 32 32 >.0 22<
1.804692 [D4] read: ret 6 buf a6: 30 2e 31 20 30 >0.1 0<
1.825691 [D4] read: ret 6 buf 86: 32 30 20 34 39 >20 49<
1.846690 [D4] read: ret 6 buf a6: 2e 39 20 32 2e >.9 2.<
1.867695 [D4] read: ret 6 buf 86: 32 33 20 34 33 >23 43<
1.887695 [D4] read: ret 6 buf a6: 2e 30 20 30 30 >.0 00<
1.908701 [D4] read: ret 6 buf 86: 30 30 30 30 30 >00000<
000<.406872 [D4] read: ret 6 buf a3: 31 0d 30 30 30 >1
2.406961 [D3] trailing bytes in serial transmission found: 2 copied out of 3
2.407013 [D3] armac command Q1 response read: '(240.0 000.0 220.1 020 49.9 2.23 43.0 00000001'
2.407089 [D5] send_to_all: SETINFO input.voltage "240.0"
2.407111 [D4] armac command ID
0< 3.083873 [D4] read: ret 6 buf 85: 4e 41 4b 0d 30 >NAK
3.083906 [D3] trailing bytes in serial transmission found: 4 copied out of 5
3.083943 [D3] armac command ID response read: 'NAK'
3.083963 [D4] bestups_preprocess_id_answer: wrong length [device.model: 4]
3.083981 [D4] qx_process: failed to preprocess answer [device.model]
3.084001 [D5] send_to_all: DELINFO input.voltage
3.084020 [D4] armac command Q1
3.261887 [D4] read: ret 6 buf a6: 28 32 33 39 2e >(239.<
3.282888 [D4] read: ret 6 buf 86: 36 20 30 30 30 >6 000<
3.303893 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
3.324894 [D4] read: ret 6 buf 86: 39 2e 39 20 30 >9.9 0<
3.345895 [D4] read: ret 6 buf a6: 32 30 20 35 30 >20 50<
3.366898 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
3.386899 [D4] read: ret 6 buf a6: 32 33 20 34 33 >23 43<
3.407903 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
3.428905 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.929992 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
3.930020 [D3] trailing bytes in serial transmission found: 2 copied out of 3
3.930038 [D3] armac command Q1 response read: '(239.6 000.0 219.9 020 50.0 2.23 43.0 00000001'
3.930075 [D5] send_to_all: SETINFO input.voltage "239.6"
3.930096 [D4] armac command ID
0< 4.597093 [D4] read: ret 6 buf a5: 4e 41 4b 0d 30 >NAK
4.597172 [D3] trailing bytes in serial transmission found: 4 copied out of 5
4.597214 [D3] armac command ID response read: 'NAK'
4.597234 [D4] bestups_preprocess_id_answer: wrong length [device.model: 4]
4.597264 [D4] qx_process: failed to preprocess answer [device.model]
4.597284 [D5] send_to_all: DELINFO input.voltage
4.597303 [D4] armac command Q1
4.782094 [D4] read: ret 6 buf 86: 28 32 33 39 2e >(239.<
4.803098 [D4] read: ret 6 buf a6: 34 20 30 30 30 >4 000<
4.824098 [D4] read: ret 6 buf 86: 2e 30 20 32 31 >.0 21<
4.845097 [D4] read: ret 6 buf a6: 39 2e 38 20 30 >9.8 0<
4.866111 [D4] read: ret 6 buf 86: 32 30 20 35 30 >20 50<
4.886103 [D4] read: ret 6 buf a6: 2e 30 20 32 2e >.0 2.<
4.907108 [D4] read: ret 6 buf 86: 32 33 20 34 33 >23 43<
4.928117 [D4] read: ret 6 buf a6: 2e 30 20 30 30 >.0 00<
4.949115 [D4] read: ret 6 buf 86: 30 30 30 30 30 >00000<
000<.453377 [D4] read: ret 6 buf a3: 31 0d 30 30 30 >1
5.453460 [D3] trailing bytes in serial transmission found: 2 copied out of 3
5.453514 [D3] armac command Q1 response read: '(239.4 000.0 219.8 020 50.0 2.23 43.0 00000001'
5.453603 [D5] send_to_all: SETINFO input.voltage "239.4"
5.453659 [D2] armac: unsupported cmd: QPI
5.453750 [D2] qx_process_answer: short reply (ups.firmware.aux)
5.453923 [D5] send_to_all: DELINFO input.voltage
5.454170 [D4] armac command Q1
5.632283 [D4] read: ret 6 buf 86: 28 32 33 38 2e >(238.<
5.653312 [D4] read: ret 6 buf a6: 38 20 30 30 30 >8 000<
5.674350 [D4] read: ret 6 buf 86: 2e 30 20 32 31 >.0 21<
5.695288 [D4] read: ret 6 buf a6: 39 2e 39 20 30 >9.9 0<
5.715321 [D4] read: ret 6 buf 86: 32 30 20 34 39 >20 49<
5.736293 [D4] read: ret 6 buf a6: 2e 39 20 32 2e >.9 2.<
5.757326 [D4] read: ret 6 buf 86: 32 35 20 34 33 >25 43<
5.778304 [D4] read: ret 6 buf a6: 2e 30 20 30 30 >.0 00<
5.799308 [D4] read: ret 6 buf 86: 30 30 30 30 30 >00000<
000<.298523 [D4] read: ret 6 buf a3: 31 0d 30 30 30 >1
6.298721 [D3] trailing bytes in serial transmission found: 2 copied out of 3
6.298888 [D3] armac command Q1 response read: '(238.8 000.0 219.9 020 49.9 2.25 43.0 00000001'
6.299126 [D5] send_to_all: SETINFO input.voltage "238.8"
6.299335 [D2] armac: unsupported cmd: QPI
6.299551 [D2] qx_process_answer: short reply (ups.firmware.aux)
6.299745 [D5] send_to_all: DELINFO input.voltage
6.300086 [D4] armac command Q1
6.482399 [D4] read: ret 6 buf 86: 28 32 33 38 2e >(238.<
6.503399 [D4] read: ret 6 buf a6: 36 20 30 30 30 >6 000<
6.524439 [D4] read: ret 6 buf 86: 2e 30 20 32 32 >.0 22<
6.544403 [D4] read: ret 6 buf a6: 30 2e 32 20 30 >0.2 0<
6.565437 [D4] read: ret 6 buf 86: 31 39 20 34 39 >19 49<
6.586408 [D4] read: ret 6 buf a6: 2e 39 20 32 2e >.9 2.<
6.607416 [D4] read: ret 6 buf 86: 32 33 20 34 33 >23 43<
6.628414 [D4] read: ret 6 buf a6: 2e 30 20 30 30 >.0 00<
6.649454 [D4] read: ret 6 buf 86: 30 30 30 30 30 >00000<
000<.154605 [D4] read: ret 6 buf a3: 31 0d 30 30 30 >1
7.154780 [D3] trailing bytes in serial transmission found: 2 copied out of 3
7.154939 [D3] armac command Q1 response read: '(238.6 000.0 220.2 019 49.9 2.23 43.0 00000001'
7.155160 [D5] send_to_all: SETINFO input.voltage "238.6"
7.155370 [D2] armac: unsupported cmd: QPI
7.155582 [D2] qx_process_answer: short reply (ups.firmware.aux)
7.155796 [D5] send_to_all: DELINFO input.voltage
7.156132 [D4] armac command Q1
7.332543 [D4] read: ret 6 buf 86: 28 32 33 38 2e >(238.<
7.353577 [D4] read: ret 6 buf a6: 34 20 30 30 30 >4 000<
7.373591 [D4] read: ret 6 buf 86: 2e 30 20 32 32 >.0 22<
7.394519 [D4] read: ret 6 buf a6: 30 2e 30 20 30 >0.0 0<
7.415524 [D4] read: ret 6 buf 86: 32 30 20 35 30 >20 50<
7.436592 [D4] read: ret 6 buf a6: 2e 30 20 32 2e >.0 2.<
7.457581 [D4] read: ret 6 buf 86: 32 35 20 34 33 >25 43<
7.478602 [D4] read: ret 6 buf a6: 2e 30 20 30 30 >.0 00<
7.498569 [D4] read: ret 6 buf 86: 30 30 30 30 30 >00000<
000<.000721 [D4] read: ret 6 buf a3: 31 0d 30 30 30 >1
8.000802 [D3] trailing bytes in serial transmission found: 2 copied out of 3
8.000856 [D3] armac command Q1 response read: '(238.4 000.0 220.0 020 50.0 2.25 43.0 00000001'
8.000946 [D5] send_to_all: SETINFO input.voltage "238.4"
8.001017 [D4] armac command I
8.182658 [D4] read: ret 6 buf 86: 23 32 32 32 32 >#2222<
8.202629 [D4] read: ret 6 buf a6: 32 32 32 32 32 >22222<
8.223635 [D4] read: ret 6 buf 86: 32 32 32 32 32 >22222<
8.244635 [D4] read: ret 6 buf a6: 32 32 32 32 32 >22222<
8.265670 [D4] read: ret 6 buf 86: 32 32 32 32 32 >22222<
8.286668 [D4] read: ret 6 buf a6: 32 32 32 52 31 >222R1<
8.307681 [D4] read: ret 6 buf 86: 2e 30 30 2e 34 >.00.4<
4< 8.816814 [D4] read: ret 6 buf a5: 37 20 20 0d 34 >7
8.816999 [D3] trailing bytes in serial transmission found: 4 copied out of 5
8.817159 [D3] armac command I response read: '#222222222222222222222222222R1.00.47 '
8.817366 [D5] send_to_all: SETINFO ups.firmware "R1.00.47"
8.817552 Using protocol: Megatec 0.07
8.817670 [D5] send_to_all: SETINFO driver.state "init.quiet"
8.817734 [D5] send_to_all: SETINFO driver.version "2.8.1-35-g8c913eda4"
8.817792 [D5] send_to_all: SETINFO driver.version.internal "0.36"
8.817848 [D5] send_to_all: SETINFO driver.name "nutdrv_qx"
8.818019 [D5] send_to_all: SETINFO driver.state "init.info"
8.818219 [D1] upsdrv_initinfo...
8.818483 [D5] send_to_all: SETINFO driver.version.data "Megatec 0.07"
8.818737 [D4] armac command Q1
8.982740 [D4] read: ret 6 buf 86: 28 32 33 38 2e >(238.<
9.002765 [D4] read: ret 6 buf a6: 36 20 30 30 30 >6 000<
9.023804 [D4] read: ret 6 buf 86: 2e 30 20 32 32 >.0 22<
9.044744 [D4] read: ret 6 buf a6: 30 2e 30 20 30 >0.0 0<
9.065775 [D4] read: ret 6 buf 86: 32 30 20 35 30 >20 50<
9.086747 [D4] read: ret 6 buf a6: 2e 30 20 32 2e >.0 2.<
9.106752 [D4] read: ret 6 buf 86: 32 35 20 34 33 >25 43<
9.127779 [D4] read: ret 6 buf a6: 2e 30 20 30 30 >.0 00<
9.148786 [D4] read: ret 6 buf 86: 30 30 30 30 30 >00000<
000<.652887 [D4] read: ret 6 buf a3: 31 0d 30 30 30 >1
9.652949 [D3] trailing bytes in serial transmission found: 2 copied out of 3
9.653000 [D3] armac command Q1 response read: '(238.6 000.0 220.0 020 50.0 2.25 43.0 00000001'
9.653077 [D5] send_to_all: SETINFO input.voltage.fault "0.0"
9.653156 [D5] send_to_all: SETINFO output.voltage "220.0"
9.653286 [D5] send_to_all: SETINFO ups.load "20"
9.653457 [D5] send_to_all: SETINFO input.frequency "50.0"
9.653592 [D5] send_to_all: SETINFO battery.voltage "2.25"
9.653664 [D5] send_to_all: SETINFO ups.temperature "43.0"
9.653773 [D5] update_status: OL
9.653952 [D5] update_status: !LB
9.654106 [D5] send_to_all: SETINFO ups.type "online"
9.654166 [D5] update_status: !CAL
9.654317 [D5] update_status: !FSD
9.654491 [D5] send_to_all: SETINFO ups.beeper.status "enabled"
9.654727 [D4] armac command F
9.831884 [D4] read: ret 6 buf 86: 23 32 32 30 2e >#220.<
9.852899 [D4] read: ret 6 buf a6: 30 20 30 30 34 >0 004<
9.873889 [D4] read: ret 6 buf 86: 20 30 32 34 2e > 024.<
9.894855 [D4] read: ret 6 buf a6: 30 20 35 30 2e >0 50.<
50.<.399974 [D4] read: ret 6 buf 83: 30 0d 35 30 2e >0
10.400038 [D3] trailing bytes in serial transmission found: 2 copied out of 3
10.400092 [D3] armac command F response read: '#220.0 004 024.0 50.0'
10.400176 [D5] send_to_all: SETINFO input.voltage.nominal "220"
10.400250 [D5] send_to_all: SETINFO input.current.nominal "4.0"
10.400320 [D5] send_to_all: SETINFO battery.voltage.nominal "24.0"
10.400389 [D5] send_to_all: SETINFO input.frequency.nominal "50"
10.400443 [D4] armac command I
10.572009 [D4] read: ret 6 buf a6: 23 32 32 32 32 >#2222<
10.592950 [D4] read: ret 6 buf 86: 32 32 32 32 32 >22222<
10.613952 [D4] read: ret 6 buf a6: 32 32 32 32 32 >22222<
10.634951 [D4] read: ret 6 buf 86: 32 32 32 32 32 >22222<
10.655985 [D4] read: ret 6 buf a6: 32 32 32 32 32 >22222<
10.676010 [D4] read: ret 6 buf 86: 32 32 32 52 31 >222R1<
10.696962 [D4] read: ret 6 buf a6: 2e 30 30 2e 34 >.00.4<
4<11.206065 [D4] read: ret 6 buf 85: 37 20 20 0d 34 >7
11.206126 [D3] trailing bytes in serial transmission found: 4 copied out of 5
11.206180 [D3] armac command I response read: '#222222222222222222222222222R1.00.47 '
11.206251 [D5] send_to_all: SETINFO device.mfr "222222222222222"
11.206317 [D5] send_to_all: SETINFO device.model "2222222222"
11.206378 [D5] send_to_all: ADDCMD beeper.toggle
11.206434 [D5] send_to_all: ADDCMD load.off
11.206488 [D5] send_to_all: ADDCMD load.on
11.206541 [D5] send_to_all: ADDCMD shutdown.return
11.206594 [D5] send_to_all: ADDCMD shutdown.stayoff
11.206648 [D5] send_to_all: ADDCMD shutdown.stop
11.206701 [D5] send_to_all: ADDCMD test.battery.start
11.206754 [D5] send_to_all: ADDCMD test.battery.start.deep
11.206808 [D5] send_to_all: ADDCMD test.battery.start.quick
11.206861 [D5] send_to_all: ADDCMD test.battery.stop
11.206918 [D5] send_to_all: SETINFO ups.delay.start "180"
11.206972 [D5] send_to_all: SETFLAGS ups.delay.start RW
11.207065 [D5] send_to_all: ADDRANGE ups.delay.start 0 599940
11.207123 [D5] send_to_all: SETFLAGS ups.delay.start RW NUMBER
11.207192 [D5] send_to_all: SETINFO ups.delay.shutdown "30"
11.207246 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW
11.207300 [D5] send_to_all: ADDRANGE ups.delay.shutdown 12 600
11.207355 [D5] send_to_all: SETFLAGS ups.delay.shutdown RW NUMBER
11.207412 No values for battery high/low voltages
11.207471 [D5] send_to_all: SETINFO battery.voltage.low "20.80"
11.207529 [D5] send_to_all: SETINFO battery.voltage.high "26.00"
11.207583 Using 'guesstimation' (low: 20.800000, high: 26.000000)!
11.207652 [D5] send_to_all: SETINFO battery.charge "0"
11.207720 Autodetected 12 as number of battery packs [24/2.25]
11.207771 Battery runtime will not be calculated (runtimecal not set)
11.207838 [D5] send_to_all: SETINFO driver.parameter.pollfreq "30"
11.207914 [D5] send_to_all: SETINFO driver.state "init.updateinfo"
11.208014 [D1] upsdrv_updateinfo...
11.208067 [D1] Quick update...
11.208120 [D4] armac command Q1
11.372137 [D4] read: ret 6 buf a6: 28 32 33 39 2e >(239.<
11.393060 [D4] read: ret 6 buf 86: 31 20 30 30 30 >1 000<
11.414090 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
11.435106 [D4] read: ret 6 buf 86: 30 2e 32 20 30 >0.2 0<
11.456104 [D4] read: ret 6 buf a6: 32 30 20 34 39 >20 49<
11.476071 [D4] read: ret 6 buf 86: 2e 39 20 32 2e >.9 2.<
11.497071 [D4] read: ret 6 buf a6: 32 33 20 34 33 >23 43<
11.518100 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
11.539078 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.042229 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
12.042300 [D3] trailing bytes in serial transmission found: 2 copied out of 3
12.042354 [D3] armac command Q1 response read: '(239.1 000.0 220.2 020 49.9 2.23 43.0 00000001'
12.042416 [D5] update_status: OL
12.042473 [D5] update_status: !LB
12.042534 [D5] update_status: !CAL
12.042588 [D5] update_status: !FSD
12.042656 [D5] send_to_all: SETINFO ups.status "OL"
12.042707 [D5] send_to_all: DATAOK
12.042765 [D5] send_to_all: SETINFO driver.state "init.quiet"
12.042825 [D5] send_to_all: SETINFO driver.parameter.pollinterval "2"
12.042883 [D5] send_to_all: SETINFO driver.parameter.synchronous "auto"
12.042936 Running as foreground process, not saving a PID file
12.042991 [D5] send_to_all: SETINFO driver.flag.allow_killpower "0"
12.043045 [D5] send_to_all: SETFLAGS driver.flag.allow_killpower RW NUMBER
12.043103 [D5] send_to_all: ADDCMD driver.killpower
12.043156 [D5] send_to_all: ADDCMD driver.reload
12.043208 [D5] send_to_all: ADDCMD driver.reload-or-exit
12.043263 [D5] send_to_all: ADDCMD driver.reload-or-error
12.043316 [D5] send_to_all: SETINFO driver.state "quiet"
12.043366 [D1] Driver initialization completed, beginning data dump (1 loops)
12.043422 [D5] send_to_all: SETINFO driver.state "updateinfo"
12.043472 [D1] upsdrv_updateinfo...
12.043534 [D1] Quick update...
12.043588 [D4] armac command Q1
12.227173 [D4] read: ret 6 buf a6: 28 32 33 39 2e >(239.<
12.248205 [D4] read: ret 6 buf 86: 31 20 30 30 30 >1 000<
12.269215 [D4] read: ret 6 buf a6: 2e 30 20 32 31 >.0 21<
12.290179 [D4] read: ret 6 buf 86: 39 2e 39 20 30 >9.9 0<
12.311182 [D4] read: ret 6 buf a6: 32 30 20 34 39 >20 49<
12.332181 [D4] read: ret 6 buf 86: 2e 39 20 32 2e >.9 2.<
12.352218 [D4] read: ret 6 buf a6: 32 35 20 34 33 >25 43<
12.373189 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
12.394197 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.898349 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
12.898414 [D3] trailing bytes in serial transmission found: 2 copied out of 3
12.898468 [D3] armac command Q1 response read: '(239.1 000.0 219.9 020 49.9 2.25 43.0 00000001'
12.898534 [D5] update_status: OL
12.898591 [D5] update_status: !LB
12.898652 [D5] update_status: !CAL
12.898713 [D5] update_status: !FSD
12.898780 [D5] send_to_all: SETINFO driver.state "quiet"
12.898837 [D5] send_to_all: SETINFO driver.state "updateinfo"
12.898887 [D1] upsdrv_updateinfo...
12.898939 [D1] Quick update...
12.898993 [D4] armac command Q1
13.072312 [D4] read: ret 6 buf a6: 28 32 33 39 2e >(239.<
13.093287 [D4] read: ret 6 buf 86: 31 20 30 30 30 >1 000<
13.114292 [D4] read: ret 6 buf a6: 2e 30 20 32 32 >.0 22<
13.134290 [D4] read: ret 6 buf 86: 30 2e 30 20 30 >0.0 0<
13.155294 [D4] read: ret 6 buf a6: 31 39 20 35 30 >19 50<
13.176319 [D4] read: ret 6 buf 86: 2e 30 20 32 2e >.0 2.<
13.197301 [D4] read: ret 6 buf a6: 32 33 20 34 33 >23 43<
13.218302 [D4] read: ret 6 buf 86: 2e 30 20 30 30 >.0 00<
13.239306 [D4] read: ret 6 buf a6: 30 30 30 30 30 >00000<
000<.743408 [D4] read: ret 6 buf 83: 31 0d 30 30 30 >1
13.743469 [D3] trailing bytes in serial transmission found: 2 copied out of 3
13.743521 [D3] armac command Q1 response read: '(239.1 000.0 220.0 019 50.0 2.23 43.0 00000001'
13.743579 [D5] update_status: OL
13.743634 [D5] update_status: !LB
13.743692 [D5] update_status: !CAL
13.743748 [D5] update_status: !FSD
13.743811 [D5] send_to_all: SETINFO driver.state "quiet"
13.743866 [D5] send_to_all: SETINFO driver.state "dumping"
13.743916 [D3] Entering dstate_dump
battery.charge: 0
battery.voltage: 2.25
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.mfr: 222222222222222
device.model: 2222222222
device.type: ups
driver.debug: 6
driver.flag.allow_killpower: 0
driver.name: nutdrv_qx
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 1234
driver.parameter.subdriver: armac
driver.parameter.synchronous: auto
driver.parameter.vendorid: 0925
driver.state: dumping
driver.version: 2.8.1-35-g8c913eda4
driver.version.data: Megatec 0.07
driver.version.internal: 0.36
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.current.nominal: 4.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 238.4
input.voltage.fault: 0.0
input.voltage.nominal: 220
output.voltage: 220.0
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: R1.00.47
ups.load: 20
ups.productid: 1234
ups.status: OL
ups.temperature: 43.0
ups.type: online
ups.vendorid: 0925
13.745162 [D5] send_to_all: SETINFO driver.state "cleanup.upsdrv"
13.745215 [D1] upsdrv_cleanup...
13.745978 [D5] send_to_all: SETINFO driver.state "cleanup.exit"
I also have one last question for you.... I installed on my rasperry PI4 nut with the command:
sudo apt install nut
the version that downloads from the official repositories is version 2.8.0.7 ...
Is there an alternative repository from which I can get version 2.8.1-35 which I just tested and recompiled from github?
I don't understand what is the procedure to replace NUT with the most up-to-date version?
Hi, I have follow After a step here
after a complete rasperry reboot now work.
Missing only battery information: is normal or is possible to fix? I have also tested the condition when UPS go on Battery, removing the current; but that charge value does not change
I have also installed the http CGI and this is the result:
solved this is the way to fix also this: battery charge
Congratulations with your progress and new learnings :)
As for repositories with recent NUT builds packaged - I am not aware of any, at least the NUT CI efforts do not currently produce packages nor containers.
There is a lingering hope to provide "reference" packaging definitions in the source tree and integrate perhaps with OBS or GitHub actions to build them into deb/rpm/... archives. But so far there was not much progress about that.
Hi , I have a problem with this model. Here the URL https://www.vultech.it/it/serie-server/972-gruppo-di-continuit%C3%A0-server-series-rack-1000va-gs-1kvas-rk-onda-sinusoidale-8052780306003.html
Native software is "PowerManager II"
I have a new rasperry pi4 and I have installed the release from repository (2.8.0.7)
lsusb
lsusb -vvv -d0925:
/etc/nut/ups.conf
sudo /usr/lib/nut/nutdrv_qx -DDDD -a vultech
I have found a similar thread problem here: #1978