PowerWalker VI 3000 SCL

[daxpedda]

Product

https://powerwalker.com/product/10121144/

Connected through USB, confirmed not working with blazer_usb (as reported in the database).

Working ups.conf setting

Discovered through nut-scanner.

[ups]
driver = "nutdrv_qx"
port = "auto"
vendorid = "0665"
productid = "5161"
product = "HID UPS"
serial = ""
vendor = "HID UPS"
bus = "001"

Reported parameters

# upsc ups
battery.charge: 100
battery.voltage: 27.00
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.type: ups
driver.name: nutdrv_qx
driver.parameter.bus: 001
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.product: HID UPS
driver.parameter.productid: 5161
driver.parameter.serial: 
driver.parameter.synchronous: auto
driver.parameter.vendor: HID UPS
driver.parameter.vendorid: 0665
driver.version: 2.8.0
driver.version.data: Mustek 0.07
driver.version.internal: 0.32
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.current.nominal: 13.0
input.frequency: 50.1
input.frequency.nominal: 50
input.voltage: 230.5
input.voltage.fault: 230.5
input.voltage.nominal: 230
output.voltage: 230.5
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 7
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

Reported commands

# upscmd -l ups
Instant commands supported on UPS [ups]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

[jimklimov]

Thank you!