search

nevermore3d / Nevermore_Micro

Activated Carbon Filters. Bad smells or fumes, or complaints thereof, should not keep you from being a maker!
1.21k stars 131 forks source link

V6_Plenum[2020_extrusion].stl print issue #46

Closed Marshalldog closed 1 year ago

Marshalldog commented 1 year ago

I love the v6 but the current print orientation for the "V6_Plenum[2020_extrusion].stl" is problematic. the print orientation of the stl positions a long, thin, edge, which makes the design highly susceptible to warping (especially considering the recommended material being abs). I tried multiple times to print it with an enclosed voron 2.4 with a chamber temp above 40 but the print consistently warped to the point of being unusable (because the magnetic warped too far away from the correct position. I'd recommend a version of the design with a print orientation like the v5 "V2_Duo_Plenum.stl" to reduce warping.

0ndsk4 commented 1 year ago

thanks for the suggestion - unfortunately, the printing direction is one of the pros of the upgrade, allowing the built in seals that prevent air leaks. it has been printed by plenty of people in regular abs, so your issue is most likely a settings/surface issue. If you want something micro sized and dont overcome these difficulties, the v5 has a different printing direction. thanks.