search

nfc-tools / libnfc

Platform independent Near Field Communication (NFC) library
http://nfc-tools.org
GNU Lesser General Public License v3.0
1.68k stars 439 forks source link

nfc-mfclassic sucess but not wriring... #684

Open mvetois opened 1 year ago

mvetois commented 1 year ago

Hello, i have an issue with nfc-mfclassic. I try to copy a card to an other, the result of nfc-mfclassic is success, the data inside the nfc key is exactly the same as before the run of the command.

nfc-mfclassic output :

NFC reader: ACS / ACR122U PICC Interface opened
Found MIFARE Classic card:
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04
       UID (NFCID1): 0c  68  13  3d
      SAK (SEL_RES): 08
RATS support: no
Guessing size: seems to be a 1024-byte card
Sent bits:     50  00  57  cd
Sent bits:     40 (7 bits)
Received bits: a (4 bits)
Sent bits:     43
Received bits: 0a
Card unlocked
Writing 64 blocks |................................................................|
Done, 64 of 64 blocks written.

I tried with an other nfc key, it's the same...

Some of you has any idea ?

Ludo1598 commented 1 year ago

Hello, I have the same problem, did you find a solution to the problem ?

mvetois commented 1 year ago

No, I haven't resolved this clue ..

gorghino commented 1 year ago

+1

Cioci89 commented 1 year ago

I have the same problem but found a workaround that worked for me. The problem occurs only with the new library libnfc-1.8.0, while with works perfectly with 1.7.1 This are the step: #Uninstall libnfc-1.8.0 that have the problem sudo apt remove libnfc6

I prepared a package of libnfc-1.7.1 with the driver patch for acr122 ( I only took the acr122_usb.c file from libnfc-1.8.0 version 1.8.0 and replaced it for the libnfc-1.7.1/libnfc/drivers/acr122_usb.c file)

If you want you can download it from the link below or from the attachment https://mega.nz/file/1l8gEAya#7FuZyhBjdn_U4oyYCoCn1QLvAdm4MorVkeTVwLjG6Fc

#Now we need to unzip the file unzip libnfc-1.7.1.zip cd libnfc-1.7.1

#Just to make sure that you have all the libraries to be able to compile the package sudo apt-get update sudo apt-get install libnfc-dev build-essential libssl-dev

#Now we compile & build it ./configure sudo make sudo make install_

#If you don't receive any error try to open a terminal and do: nfc-list

You need to see: "nfc-list uses libnfc 1.7.1" (With the version that works) Else if you see: "nfc-list uses libnfc 1.8.0" (You will have to remove the installed version 1.8.0, download the package of the previous 1.7.1 and recompile it)

#If is all correct now you are able to write the file with nfc-mfclassic nfc-mfclassic W a dumpfile.mfd

I hope that this guide can help you

libnfc-1.7.1.zip

Ludo1598 commented 1 year ago

I have the same problem but i have a workaround..works for me..the problem there is only with libnfc-1.8.0....with 1.7.1 it works perfectly This is the step: #Uninstall libnfc-1.8.0 that have the problem sudo apt remove libnfc6

I prepared a package of libnfc-1.7.1 with patched drivers for acr122 (i take the file acr122_usb.c of libnfc-1.8.0 and replaced this file libnfc-1.7.1/libnfc/drivers/acr122_usb.c)

If you can download from here or from the attachment https://mega.nz/file/1l8gEAya#7FuZyhBjdn_U4oyYCoCn1QLvAdm4MorVkeTVwLjG6Fc

#Now we need to unzip the file unzip libnfc-1.7.1.zip cd libnfc-1.7.1 #just for security that you are able to compile the package sudo apt-get update sudo apt-get install libnfc-dev build-essential libssl-dev ./configure sudo make sudo make install

#if you don't receive any error try to open a terminal and do: nfc-list you need to see: nfc-list uses libnfc 1.7.1 (with the correct version) if you see: nfc-list uses libnfc 1.8.0 (you need to remove the installed 1.8.0 version and after that you can reconfigure and make your old package but work for me)

#If is all correct now you are able to write the file with nfc-mfclassic nfc-mfclassic W a dumpfile.mfd

i hope that this guide can help someone like me..

libnfc-1.7.1.zip

Thank you very much for your solution, it works very well for me. thanks again

ld21 commented 1 year ago

Unfortunately, my problem of trying to write to a card is not resolved with switching to 1.7.1. Even though I can easily read from cards, I cannot write to it:

nfc-mfclassic W a dump.mfd results in NFC reader: pn532_uart:/dev/ttyUSB0 opened Found MIFARE Classic card: ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04 UID (NFCID1): d6 10 b6 26 SAK (SEL_RES): 08 Guessing size: seems to be a 1024-byte card Sent bits: 50 00 57 cd Sent bits: 40 (7 bits) unlock failure!

When trying to write it with nfc-mfclassic w a dump.mfd dump.mfd I get NFC reader: pn532_uart:/dev/ttyUSB0 opened Found MIFARE Classic card: ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04 UID (NFCID1): d6 10 b6 26 SAK (SEL_RES): 08 Guessing size: seems to be a 1024-byte card Writing 64 blocks |x

When trying with a highter LOG-Level and LIBNFC_LOG_LEVEL=3 nfc-mfclassic w a dump.mfd dump.mfd I get debug libnfc.config key: [allow_autoscan], value: [true] debug libnfc.config key: [allow_intrusive_scan], value: [true] debug libnfc.config key: [device.name], value: [Adafruit PN532 Breakout] debug libnfc.config key: [device.connstring], value: [pn532_uart:/dev/ttyUSB0] debug libnfc.config key: [device.name], value: [Adafruit PN532 board via UART] debug libnfc.config key: [device.connstring], value: [pn532_uart:/dev/ttyUSB0] debug libnfc.config key: [device.allow_intrusive_scan], value: [true] info libnfc.config Unknown key in config line: device.allow_intrusive_scan = true debug libnfc.config key: [device.log_level], value: [3] info libnfc.config Unknown key in config line: device.log_level = 3 debug libnfc.config key: [device.name], value: [PN532 board via UART] debug libnfc.config key: [device.connstring], value: [pn532_uart:/dev/ttyUSB0] debug libnfc.config key: [device.allow_intrusive_scan], value: [true] info libnfc.config Unknown key in config line: device.allow_intrusive_scan = true debug libnfc.general log_level is set to 3 debug libnfc.general allow_autoscan is set to true debug libnfc.general allow_intrusive_scan is set to true debug libnfc.general 3 device(s) defined by user debug libnfc.general #0 name: "Adafruit PN532 Breakout", connstring: "pn532_uart:/dev/ttyUSB0" debug libnfc.general #1 name: "Adafruit PN532 board via UART", connstring: "pn532_uart:/dev/ttyUSB0" debug libnfc.general #2 name: "PN532 board via UART", connstring: "pn532_uart:/dev/ttyUSB0" debug libnfc.driver.pn532_uart Attempt to open: /dev/ttyUSB0 at 115200 bauds. debug libnfc.bus.uart Serial port speed requested to be set to 115200 bauds. debug libnfc.chip.pn53x Diagnose debug libnfc.chip.pn53x Timeout value: 500 debug libnfc.bus.uart TX: 55 55 00 00 00 00 00 00 00 00 00 00 00 00 00 00 debug libnfc.chip.pn53x SAMConfiguration debug libnfc.chip.pn53x Timeout value: 1000 debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 14 01 17 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 15 debug libnfc.bus.uart RX: 16 00 debug libnfc.bus.uart TX: 00 00 ff 09 f7 d4 00 00 6c 69 62 6e 66 63 be 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 09 f7 debug libnfc.bus.uart RX: d5 01 debug libnfc.bus.uart RX: 00 6c 69 62 6e 66 63 debug libnfc.bus.uart RX: bc 00 debug libnfc.chip.pn53x GetFirmwareVersion debug libnfc.bus.uart TX: 00 00 ff 02 fe d4 02 2a 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 06 fa debug libnfc.bus.uart RX: d5 03 debug libnfc.bus.uart RX: 32 01 06 07 debug libnfc.bus.uart RX: e8 00 debug libnfc.chip.pn53x SetParameters debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 12 14 06 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 13 debug libnfc.bus.uart RX: 18 00 debug libnfc.general "pn532_uart:/dev/ttyUSB0" (pn532_uart:/dev/ttyUSB0) has been claimed. debug libnfc.chip.pn53x ReadRegister debug libnfc.bus.uart TX: 00 00 ff 0c f4 d4 06 63 02 63 03 63 0d 63 38 63 3d b0 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 07 f9 debug libnfc.bus.uart RX: d5 07 debug libnfc.bus.uart RX: 00 00 00 00 00 debug libnfc.bus.uart RX: 24 00 debug libnfc.chip.pn53x PN53X_REG_CIU_TxMode (Defines the transmission data rate and framing during transmission) debug libnfc.chip.pn53x PN53X_REG_CIU_RxMode (Defines the transmission data rate and framing during receiving) debug libnfc.chip.pn53x WriteRegister debug libnfc.bus.uart TX: 00 00 ff 08 f8 d4 08 63 02 80 63 03 80 59 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 09 debug libnfc.bus.uart RX: 22 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 32 01 00 f9 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 32 01 01 f8 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 06 fa d4 32 05 ff ff ff f8 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x ReadRegister debug libnfc.bus.uart TX: 00 00 ff 0e f2 d4 06 63 02 63 03 63 05 63 38 63 3c 63 3d 19 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 08 f8 debug libnfc.bus.uart RX: d5 07 debug libnfc.bus.uart RX: 80 80 00 00 00 00 debug libnfc.bus.uart RX: 24 00 debug libnfc.chip.pn53x PN53X_REG_CIU_TxAuto (Controls the settings of the antenna driver) debug libnfc.chip.pn53x PN53X_REG_CIU_Control (Contains miscellaneous control bits) debug libnfc.chip.pn53x WriteRegister debug libnfc.bus.uart TX: 00 00 ff 08 f8 d4 08 63 05 40 63 3c 10 cd 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 09 debug libnfc.bus.uart RX: 22 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 06 fa d4 32 05 00 01 02 f2 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x SetParameters debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 12 04 16 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 13 debug libnfc.bus.uart RX: 18 00 NFC reader: pn532_uart:/dev/ttyUSB0 opened debug libnfc.chip.pn53x InListPassiveTarget debug libnfc.chip.pn53x No timeout debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 4a 01 00 e1 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 0c f4 debug libnfc.bus.uart RX: d5 4b debug libnfc.bus.uart RX: 01 01 00 04 08 04 d6 10 b6 26 debug libnfc.bus.uart RX: 0c 00 Found MIFARE Classic card: ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04 UID (NFCID1): d6 10 b6 26 SAK (SEL_RES): 08 debug libnfc.chip.pn53x InCommunicateThru debug libnfc.chip.pn53x No timeout debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 42 e0 50 ba 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 43 debug libnfc.bus.uart RX: 02 debug libnfc.bus.uart RX: e6 00 debug libnfc.chip.pn53x Chip error: "CRC Error" (02), returned error: "RF Transmission Error" (-20)) debug libnfc.chip.pn53x InListPassiveTarget debug libnfc.chip.pn53x No timeout debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 4a 01 00 e1 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 0c f4 debug libnfc.bus.uart RX: d5 4b debug libnfc.bus.uart RX: 01 01 00 04 08 04 d6 10 b6 26 debug libnfc.bus.uart RX: 0c 00 Guessing size: seems to be a 1024-byte card Writing 64 blocks |debug libnfc.chip.pn53x InDataExchange debug libnfc.bus.uart TX: 00 00 ff 0f f1 d4 40 01 60 00 a0 a1 a2 a3 a4 a5 d6 10 b6 26 fa 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 41 debug libnfc.bus.uart RX: 00 debug libnfc.bus.uart RX: ea 00 debug libnfc.chip.pn53x InDataExchange debug libnfc.bus.uart TX: 00 00 ff 15 eb d4 40 01 a0 01 97 0f 02 00 00 00 00 00 00 00 00 00 00 00 00 00 a2 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 41 debug libnfc.bus.uart RX: 01 debug libnfc.bus.uart RX: e9 00 debug libnfc.chip.pn53x Chip error: "Timeout" (01), returned error: "RF Transmission Error" (-20)) debug libnfc.chip.pn53x InRelease debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 52 00 da 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 53 debug libnfc.bus.uart RX: 00 debug libnfc.bus.uart RX: d8 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 32 01 00 f9 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x PowerDown debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 16 f0 26 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 17 debug libnfc.bus.uart RX: 00 debug libnfc.bus.uart RX: 14 00 x

Or when running LIBNFC_LOG_LEVEL=3 nfc-mfclassic W a dump.mfd I get among similar code to above debug libnfc.chip.pn53x Chip error: "Timeout" (01), returned error: "RF Transmission Error" (-20)) unlock failure!

Any ideas what could be wrong? Thanks!

Cioci89 commented 1 year ago

Unfortunately, my problem of trying to write to a card is not resolved with switching to 1.7.1. Even though I can easily read from cards, I cannot write to it:

nfc-mfclassic W a dump.mfd results in NFC reader: pn532_uart:/dev/ttyUSB0 opened Found MIFARE Classic card: ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04 UID (NFCID1): d6 10 b6 26 SAK (SEL_RES): 08 Guessing size: seems to be a 1024-byte card Sent bits: 50 00 57 cd Sent bits: 40 (7 bits) unlock failure!

When trying to write it with nfc-mfclassic w a dump.mfd dump.mfd I get NFC reader: pn532_uart:/dev/ttyUSB0 opened Found MIFARE Classic card: ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04 UID (NFCID1): d6 10 b6 26 SAK (SEL_RES): 08 Guessing size: seems to be a 1024-byte card Writing 64 blocks |x

When trying with a highter LOG-Level and LIBNFC_LOG_LEVEL=3 nfc-mfclassic w a dump.mfd dump.mfd I get debug libnfc.config key: [allow_autoscan], value: [true] debug libnfc.config key: [allow_intrusive_scan], value: [true] debug libnfc.config key: [device.name], value: [Adafruit PN532 Breakout] debug libnfc.config key: [device.connstring], value: [pn532_uart:/dev/ttyUSB0] debug libnfc.config key: [device.name], value: [Adafruit PN532 board via UART] debug libnfc.config key: [device.connstring], value: [pn532_uart:/dev/ttyUSB0] debug libnfc.config key: [device.allow_intrusive_scan], value: [true] info libnfc.config Unknown key in config line: device.allow_intrusive_scan = true debug libnfc.config key: [device.log_level], value: [3] info libnfc.config Unknown key in config line: device.log_level = 3 debug libnfc.config key: [device.name], value: [PN532 board via UART] debug libnfc.config key: [device.connstring], value: [pn532_uart:/dev/ttyUSB0] debug libnfc.config key: [device.allow_intrusive_scan], value: [true] info libnfc.config Unknown key in config line: device.allow_intrusive_scan = true debug libnfc.general log_level is set to 3 debug libnfc.general allow_autoscan is set to true debug libnfc.general allow_intrusive_scan is set to true debug libnfc.general 3 device(s) defined by user debug libnfc.general #0 name: "Adafruit PN532 Breakout", connstring: "pn532_uart:/dev/ttyUSB0" debug libnfc.general #1 name: "Adafruit PN532 board via UART", connstring: "pn532_uart:/dev/ttyUSB0" debug libnfc.general #2 name: "PN532 board via UART", connstring: "pn532_uart:/dev/ttyUSB0" debug libnfc.driver.pn532_uart Attempt to open: /dev/ttyUSB0 at 115200 bauds. debug libnfc.bus.uart Serial port speed requested to be set to 115200 bauds. debug libnfc.chip.pn53x Diagnose debug libnfc.chip.pn53x Timeout value: 500 debug libnfc.bus.uart TX: 55 55 00 00 00 00 00 00 00 00 00 00 00 00 00 00 debug libnfc.chip.pn53x SAMConfiguration debug libnfc.chip.pn53x Timeout value: 1000 debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 14 01 17 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 15 debug libnfc.bus.uart RX: 16 00 debug libnfc.bus.uart TX: 00 00 ff 09 f7 d4 00 00 6c 69 62 6e 66 63 be 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 09 f7 debug libnfc.bus.uart RX: d5 01 debug libnfc.bus.uart RX: 00 6c 69 62 6e 66 63 debug libnfc.bus.uart RX: bc 00 debug libnfc.chip.pn53x GetFirmwareVersion debug libnfc.bus.uart TX: 00 00 ff 02 fe d4 02 2a 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 06 fa debug libnfc.bus.uart RX: d5 03 debug libnfc.bus.uart RX: 32 01 06 07 debug libnfc.bus.uart RX: e8 00 debug libnfc.chip.pn53x SetParameters debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 12 14 06 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 13 debug libnfc.bus.uart RX: 18 00 debug libnfc.general "pn532_uart:/dev/ttyUSB0" (pn532_uart:/dev/ttyUSB0) has been claimed. debug libnfc.chip.pn53x ReadRegister debug libnfc.bus.uart TX: 00 00 ff 0c f4 d4 06 63 02 63 03 63 0d 63 38 63 3d b0 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 07 f9 debug libnfc.bus.uart RX: d5 07 debug libnfc.bus.uart RX: 00 00 00 00 00 debug libnfc.bus.uart RX: 24 00 debug libnfc.chip.pn53x PN53X_REG_CIU_TxMode (Defines the transmission data rate and framing during transmission) debug libnfc.chip.pn53x PN53X_REG_CIU_RxMode (Defines the transmission data rate and framing during receiving) debug libnfc.chip.pn53x WriteRegister debug libnfc.bus.uart TX: 00 00 ff 08 f8 d4 08 63 02 80 63 03 80 59 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 09 debug libnfc.bus.uart RX: 22 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 32 01 00 f9 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 32 01 01 f8 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 06 fa d4 32 05 ff ff ff f8 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x ReadRegister debug libnfc.bus.uart TX: 00 00 ff 0e f2 d4 06 63 02 63 03 63 05 63 38 63 3c 63 3d 19 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 08 f8 debug libnfc.bus.uart RX: d5 07 debug libnfc.bus.uart RX: 80 80 00 00 00 00 debug libnfc.bus.uart RX: 24 00 debug libnfc.chip.pn53x PN53X_REG_CIU_TxAuto (Controls the settings of the antenna driver) debug libnfc.chip.pn53x PN53X_REG_CIU_Control (Contains miscellaneous control bits) debug libnfc.chip.pn53x WriteRegister debug libnfc.bus.uart TX: 00 00 ff 08 f8 d4 08 63 05 40 63 3c 10 cd 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 09 debug libnfc.bus.uart RX: 22 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 06 fa d4 32 05 00 01 02 f2 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x SetParameters debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 12 04 16 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 13 debug libnfc.bus.uart RX: 18 00 NFC reader: pn532_uart:/dev/ttyUSB0 opened debug libnfc.chip.pn53x InListPassiveTarget debug libnfc.chip.pn53x No timeout debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 4a 01 00 e1 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 0c f4 debug libnfc.bus.uart RX: d5 4b debug libnfc.bus.uart RX: 01 01 00 04 08 04 d6 10 b6 26 debug libnfc.bus.uart RX: 0c 00 Found MIFARE Classic card: ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04 UID (NFCID1): d6 10 b6 26 SAK (SEL_RES): 08 debug libnfc.chip.pn53x InCommunicateThru debug libnfc.chip.pn53x No timeout debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 42 e0 50 ba 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 43 debug libnfc.bus.uart RX: 02 debug libnfc.bus.uart RX: e6 00 debug libnfc.chip.pn53x Chip error: "CRC Error" (02), returned error: "RF Transmission Error" (-20)) debug libnfc.chip.pn53x InListPassiveTarget debug libnfc.chip.pn53x No timeout debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 4a 01 00 e1 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 0c f4 debug libnfc.bus.uart RX: d5 4b debug libnfc.bus.uart RX: 01 01 00 04 08 04 d6 10 b6 26 debug libnfc.bus.uart RX: 0c 00 Guessing size: seems to be a 1024-byte card Writing 64 blocks |debug libnfc.chip.pn53x InDataExchange debug libnfc.bus.uart TX: 00 00 ff 0f f1 d4 40 01 60 00 a0 a1 a2 a3 a4 a5 d6 10 b6 26 fa 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 41 debug libnfc.bus.uart RX: 00 debug libnfc.bus.uart RX: ea 00 debug libnfc.chip.pn53x InDataExchange debug libnfc.bus.uart TX: 00 00 ff 15 eb d4 40 01 a0 01 97 0f 02 00 00 00 00 00 00 00 00 00 00 00 00 00 a2 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 41 debug libnfc.bus.uart RX: 01 debug libnfc.bus.uart RX: e9 00 debug libnfc.chip.pn53x Chip error: "Timeout" (01), returned error: "RF Transmission Error" (-20)) debug libnfc.chip.pn53x InRelease debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 52 00 da 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 53 debug libnfc.bus.uart RX: 00 debug libnfc.bus.uart RX: d8 00 debug libnfc.chip.pn53x RFConfiguration debug libnfc.bus.uart TX: 00 00 ff 04 fc d4 32 01 00 f9 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 02 fe debug libnfc.bus.uart RX: d5 33 debug libnfc.bus.uart RX: f8 00 debug libnfc.chip.pn53x PowerDown debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 16 f0 26 00 debug libnfc.bus.uart RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.uart RX: 00 00 ff 03 fd debug libnfc.bus.uart RX: d5 17 debug libnfc.bus.uart RX: 00 debug libnfc.bus.uart RX: 14 00 x

Or when running LIBNFC_LOG_LEVEL=3 nfc-mfclassic W a dump.mfd I get among similar code to above debug libnfc.chip.pn53x Chip error: "Timeout" (01), returned error: "RF Transmission Error" (-20)) unlock failure!

Any ideas what could be wrong? Thanks!

I read "unlock failure!" and this is because you use nfc-mfclassic with W Uppercase without using a Chiese Magic Card with Sector 0 (uid) editable

ld21 commented 1 year ago

That's true, thank you Cioci89 – but look at the version where I use «w» (and I think I should be using w, because I'm simply trying to overwrite a card using a dump that I received from that very card).

In the log text after issuing nfc-mfclassic w a dump.mfd dump.mfd I receive a Chip error: "CRC Error" (02), returned error: "RF Transmission Error" (-20)).

What could that be related to?

Ludo1598 commented 1 year ago

That's true, thank you Cioci89 – but look at the version where I use «w» (and I think I should be using w, because I'm simply trying to overwrite a card using a dump that I received from that very card).

In the log text after issuing nfc-mfclassic w a dump.mfd dump.mfd I receive a Chip error: "CRC Error" (02), returned error: "RF Transmission Error" (-20)).

What could that be related to?

Good morning have you tried changing the name of the dumps dump1 and dump2 nfc-mfclassic w a dump1.mfd dump2.mfd

ld21 commented 1 year ago

I have tried using two different files – it makes no difference for the writing-process.