WinPE HBCD_PE_x64 not able to boot On Network

[azizaashiq]

When I boot from the network, after selecting WinPE showing this error: Using networkpath.txt via Oxe7e4a28 len 0x3e0 Using bootmgfw.efi via Oxe7e4ac8 len 0x17c538

...found bootmgfw.efi file bootmgfw.efi Using bcd via Oxe7e4c88 len 0x5000

..found BCD

Using boot.sdi via Oxe7e4d28 len 0x306000 Using boot.wim via Oxe7e4dc8 len 0x43c192d3

...found WIM file boot.wim

..patching WIM boot.win ...patching WIM header at [0x0,0xd0)

...patching WIM wimboot at [0x43c192d3,0x43c24063)

...patching WIM networkpath.txt at [0x43c24063,0x43c24443)

...patching WIM bootmgfu.efi at [0x43c24443,0x43da097b) ...patching WIM lookup.copy at 10x43da0980,0x43e119e6)

...patching WIM lookup.boot at 10x43e119e6,0x43e11a18) ...patching WIM lookup.file at [0x43e11a18,0x43e11a4a)

...patching WIM lookup.file at [0x43e11a4a, 0x43e11a7c)

...patching WIM lookup.file at [0x43e11a7c, 0x43ellaae)

43b1b4b0-0x43b1d833)

Could not patch WIM boot.wim

Can't handle unknown compression scheme 0x00020082 for 0x43b1b39c chunk 0 at [0x iPXE>

Could not boot: Error 0x7f048281 (http://ipxe.org/7f048281)

Booting failed, dropping to shell

Type exit to get the back to the menu

[AnomSanjaya]

The WIM file from HBCD is large than other boot.wim that i ever seen, the large WIM file means require some RAM disk space when average the RAM disk is below than 1 GB, thats why i dont want to use this HBCD iso