Steps of integrating Aqara M1S gen1 CN

[vit5041]

Hi! can you please help.

I have this hub:

Model: lumi.gateway.acn01 Hardware version: Linux Firmware version: 4.0.4_0006

(Added in Mi Home, telnet closed).

How to add it to AqaraGateway?

[niceboygithub]

You need to wired UART to clean telnet password first. Another solution is that change to use hub E1. It is easier.

[vit5041]

OK, thank you. I managed and steps on highlevel are:

1. use gw_global_tool to clear admin password (on this step I did not flash modified firmware although it was offered, but for M2)
2. open telnet through clicks.

in this condition I managed to integrate Gateway to HA but nothing was working there. So I come to conclusion that customized firmware is a must.

I powered off GW and in the next power on magic clicks didn't work anymore, I tried many times and reset GW. It switched to Aqara Home mode, I had to switch it to Mijia again, added to Mi Home, all previosly added devices were lost.

3. Magic clicks worked again, I opened telnet and update firmware using "Flash M1S modified firmware method"

After that both Mi Home and Home Assistant work like charm.

So the key point — modified formware is a must and better to make it on first steps, through gw_global_tool or after, from telnet cli.

Hopefully it may be helpful.

[vit5041]

issue closed

[kai-zer-ru]

https://github.com/niceboygithub/AqaraGateway/issues/246 look here

[maodun96]

好的谢谢。 我管理的高级步骤是：

1. 使用 gw_global_tool 清除管理员密码（在这一步中，我没有刷新修改后的固件，尽管提供了它，但对于 M2）
2. 通过点击打开telnet。

在这种情况下，我设法将网关集成到 HA，但那里没有任何作用。所以我得出的结论是定制固件是必须的。

我关闭了 GW 电源，下次开机时魔法点击不再起作用，我尝试了很多次并重置了 GW。切换到Aqara Home模式，我只好再次切换到米家，添加到米家，之前添加的设备全都丢失了。

3. 魔法点击再次起作用，我打开telnet并使用“Flash M1S修改固件方法”更新固件

之后，米家和家庭助理就都发挥了魅力。

因此，关键点 - 修改后的固件是必须的，并且最好在第一步中通过 gw_global_tool 或之后从 telnet cli 进行修改。

希望它可能有所帮助。

Is gw_global_tool used through a TTL connection?

[vit5041]

好的谢谢。 我管理的高级步骤是：

1. 使用 gw_global_tool 清除管理员密码（在这一步中，我没有刷新修改后的固件，尽管提供了它，但对于 M2）
2. 通过点击打开telnet。

在这种情况下，我设法将网关集成到 HA，但那里没有任何作用。所以我得出的结论是定制固件是必须的。 我关闭了 GW 电源，下次开机时魔法点击不再起作用，我尝试了很多次并重置了 GW。切换到Aqara Home模式，我只好再次切换到米家，添加到米家，之前添加的设备全都丢失了。

3. 魔法点击再次起作用，我打开telnet并使用“Flash M1S修改固件方法”更新固件

之后，米家和家庭助理就都发挥了魅力。 因此，关键点 - 修改后的固件是必须的，并且最好在第一步中通过 gw_global_tool 或之后从 telnet cli 进行修改。 希望它可能有所帮助。

Is gw_global_tool used through a TTL connection?

Right, it works over TTL and Terra Term app.

[maodun96]

Thank you, I have also successfully carried out the operation in the same way as you.

@vit5041