syxuxiaoliang
commented
8 months ago [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4088
[ 0.000000] Kernel command line: root=/dev/mtdblock7 console=ttyS0,38400
[ 0.000000] PID hash table entries: 256 (order: -4, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 1, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 0, 16384 bytes)
[ 0.000000] Writing ErrCtl register=0000b270
[ 0.000000] Readback ErrCtl register=0000b270
[ 0.000000] Memory: 57808k/65536k available (5032k kernel code, 7728k reserved, 966k data, 208k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:192
[ 0.000000] Realtek GPIO IRQ init
[ 0.000000] Calibrating delay loop... 660.68 BogoMIPS (lpj=3303424)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 2048
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] <<<<
停在这个界面，过一会儿自动重启，还是停在这个界面，不断循环
I only need to flash linux0 and rootfs to flash the original firmware 0, still linux1 and rootfs Do you also need to refresh 1? 我刷原版固件，是只需要刷linux0和rootfs_0，还是linux1和rootfs_1 也要刷新呢？