PirateXGG
commented
3 years ago Same as your problem i didn't find any article that help and no one answered me to how fix the problem yet.
Open Banoobs opened 3 years ago
PirateXGG
commented
3 years ago Same as your problem i didn't find any article that help and no one answered me to how fix the problem yet.
Banoobs
commented
3 years ago I found the issue, excavator is reading the integrated graphics hotspot temp for some reason.. I downloaded asus tweak iii and set gpu temp.
Upon restarting device, make sure to set the monitor that it will not turn off on idle, if the monitor turns off, excavator switches to reading integrated graphics sensors (I don't know why).
Read some articles about putting hdmi dummy plug so it wouldn't switch reading to integrated graphics. will update this thread once I receive the dummy plug if it will work.
Banoobs
commented
3 years ago Update: hdmi dummy plug works. system should detect dummy plug as another monitor. In the display settings, multiple displays Show only 2. it will turn off your laptop screen, then keystroke tab and enter to keep the changes. To go back to your laptop screen, just unplug the dummy hdmi.. HTH
Hi,
I'm fairly new to mining and encountered this issue.
Device is running too hot! Performance is degraded issue for the past couple of days. It's saying around 62 - 68 degrees which I think is not that hot. I'm using a laptop with 3070 and amd 5900hx cpu
Tried the following already: disable device power mode settings installed msi afterburner but temperature limit is disabled Using a laptop cooler
What are other options I could do to have this issue resolved?
Thanks!