Closed bjn74 closed 3 years ago
Screen shot from some testing today.
I turned the AC on in Homekit, set the mode to cool. Then set the temp to a few different settings (all between 73-78). Looks like the plug in is sending out 86deg for any temperature change (which is the maximum set in the configuration section of the plug in).
Installed the hoobs plug in. Added all configuration information except for the IP address for the device (unsure where to get that). The AC appeared in homekit. I can switch the device on/off and change mode. However, when I use homekit app or Siri to change/set temperature, the AC goes to the maximum allowed setting of 86deg (both Siri and homekit app respond with the setting I requested).
I then grabbed an IP address for the wi-fi unit in the AC (from Eero mesh app) and updated the configuration for the plugin. The behavior was as before.
Any ideas! Thanks in advance.