search

nickgammon / I2C_graphical_LCD_display

Arduino library for LCD displays using I2C protocol
28 stars 15 forks source link

lcd 128x64 i2c DIYmore not doing anything #6

Open gunaone opened 4 years ago

gunaone commented 4 years ago

i use this device BTW https://www.google.com/search?q=lcd+128x64+i2c&newwindow=1&safe=strict&sxsrf=ALeKk02qpiXWP5PtuYHuMy4ZHv_mXJOCjg:1589621346523&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjl-r79iLjpAhW17XMBHVCVCeYQ_AUoAXoECAsQAw&biw=1366&bih=616#imgrc=bLMSyCvRo7z3FM

PaulRB commented 4 years ago

@gunaone that's just a link to a Google search. Post a link to your display and adaptor.

If you are indeed using the DIY MORE adaptor and a ks0108 based display, then Nick's library does not support that currently (and does not claim to, so you are wrong to assume it would).

However, I have raised a pull request to update the library to support this adaptor. Nick has not merged my changes (and is under no obligation to do so). In the mean time, try my forked version of the library here . Once installed, you will need to edit I2C_graphical_LCD_display.h and uncomment line 55.

gunaone commented 4 years ago

Hi @PaulRB thanks for your reply, N a was try your lib, but same thing, it's do nothing, I was uncomment line 55 BTW..

gunaone commented 4 years ago

IMG_20200517_070342 ![Uploading IMG_20200517_065903.jpg
]()

gunaone commented 4 years ago

IMG_20200517_065903

PaulRB commented 4 years ago

Run the "i2c_scanner" sketch from the examples menu in the Arduino IDE. Does it detect the adaptor? What address does it detect?

Run the "LCD_Demo_Using_I2C.ino" example sketch from this library to test your circuit.

gunaone commented 4 years ago

i was run the i2c scanner, i get 32 (0x20) address... and i try your example and the other one still don't get correct display

PaulRB commented 4 years ago

Good to hear that the i2c scanner sketch works and reports the correct address. Did you solder the adaptor to the display correctly? Did you check for bad solder joints? Do you have another LCD display to test?

PaulRB commented 4 years ago

Is it possible that your LCD is an ST7920 model? The adaptor is designed for KS0108 model of LCD. I do not know if this adaptor and library will work with ST7920 and I do not have one to test.

As requested 2 days ago, please post a link to your display.

gunaone commented 4 years ago

hi @PaulRB solder is good and everiting look ok. unfortunately i dont have another LCD.

and i cant find series LCD of it.

so i use 4 pin wire(RS, R/W,E,RST) and is runing ok with "u8lib" but is usefull if i can use i2c someday :)

thanks for your respon,

PaulRB commented 4 years ago

so i use 4 pin wire(RS, R/W,E,RST) and is runing ok with "u8lib"

Are you saying that the LCD works correctly using SPI bus instead of i2c adaptor? If so, my guess was correct and it must be an ST7920 LCD, not a KS0108 LCD.

If you want to use your I2C adaptor with a 128x64 LCD, then make sure to buy the KS0108 type.

If you understand and are happy, you should close this issue.

gunaone commented 4 years ago

Ok, thanks @PaulRB 👌👌👌