search

nicolas-barbot / SDR_UHF_RFID_reader

https://nicolas-barbot.ovh/wiki/index.php?title=Simple_Low_Cost_Open_Source_UHF_RFID_Reader
GNU General Public License v3.0
12 stars 9 forks source link

Hardware design files #1

Open flygandetunnan opened 7 months ago

flygandetunnan commented 7 months ago

Hi! Nice project:) Is it possible to gain access to the hardware design files for the reader, mentioned in the article? (schematic, PCB layout, bill of material)

nicolas-barbot commented 7 months ago

Dear Sir,

Thank you for support and encouragement. Actually the schematic, PCB and BOM are not up to date. Especially the Melexis TH7203X is not available anymore.

Since few weeks, I am currently searching for new components to replace it. I will then update the schematic, PCB and BOM and upload it on GitHub.

I will keep you updated.

Regards

Nicolas Barbot

----- Mail original ----- De: "flygandetunnan" @.> À: "nicolas-barbot/SDR_UHF_RFID_reader" @.> Cc: "Subscribed" @.***> Envoyé: Mercredi 10 Avril 2024 14:09:02 Objet: [nicolas-barbot/SDR_UHF_RFID_reader] Hardware design files (Issue #1)

Hi! Nice project:) Is it possible to gain access to the hardware design files for the reader, mentioned in the article? (schematic, PCB layout, bill of material)

-- Reply to this email directly or view it on GitHub: https://github.com/nicolas-barbot/SDR_UHF_RFID_reader/issues/1 You are receiving this because you are subscribed to this thread.

Message ID: @.***>

flygandetunnan commented 7 months ago

Dear Nicolas,

Thank you for your quick answer!

I see, I'm building an RFID reader myself as part of my master's thesis. I've been looking at the CC1150 from Texas for my design.

Looking forward to the new design.

Best Regards,

Oskar Munter

Från: nicolas-barbot @.***> Skickat: den 12 april 2024 19:14:42 Till: nicolas-barbot/SDR_UHF_RFID_reader Kopia: Oskar Munter; Author Ämne: Re: [nicolas-barbot/SDR_UHF_RFID_reader] Hardware design files (Issue #1)

Dear Sir,

Thank you for support and encouragement. Actually the schematic, PCB and BOM are not up to date. Especially the Melexis TH7203X is not available anymore.

Since few weeks, I am currently searching for new components to replace it. I will then update the schematic, PCB and BOM and upload it on GitHub.

I will keep you updated.

Regards

Nicolas Barbot

----- Mail original ----- De: "flygandetunnan" @.> À: "nicolas-barbot/SDR_UHF_RFID_reader" @.> Cc: "Subscribed" @.***> Envoyé: Mercredi 10 Avril 2024 14:09:02 Objet: [nicolas-barbot/SDR_UHF_RFID_reader] Hardware design files (Issue #1)

Hi! Nice project:) Is it possible to gain access to the hardware design files for the reader, mentioned in the article? (schematic, PCB layout, bill of material)

-- Reply to this email directly or view it on GitHub: https://github.com/nicolas-barbot/SDR_UHF_RFID_reader/issues/1 You are receiving this because you are subscribed to this thread.

Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/nicolas-barbot/SDR_UHF_RFID_reader/issues/1#issuecomment-2052161036, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AZAAO5KRTZOH5FQL7S4WNE3Y5AJAFAVCNFSM6AAAAABGAJ77U2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJSGE3DCMBTGY. You are receiving this because you authored the thread.Message ID: @.***>