search

nieldk / USBASP-PDI

Modified USBASP to work as a PDI Programmer
16 stars 3 forks source link

Question #1

Open tcpipchip opened 3 years ago

tcpipchip commented 3 years ago

Hi,

I have the Chinese USBASP.

To program the Chinese USBASP (update to PDI), will i need other programmer to make this programming or i can i use the same to reprogram it, as i do to the ST-LINK V2

thanks

nieldk commented 3 years ago

You should be able to use what you have. You might need to shorten a jumper to put your USBASP in programming mode. Usually you find two holes on the buttom of the PCB that is used for this.

On Sat, Oct 23, 2021, 02:58 tcpipchip @.***> wrote:

Hi,

I have the Chinese USBASP.

To program the Chinese USBASP (update to PDI), will i need other programmer to make this programming or i can i use the same to reprogram it, as i do to the ST-LINK V2

thanks

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/nieldk/USBASP-PDI/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QIN7OMMDVBGODYL6363UIICCDANCNFSM5GRU2PLQ .

tcpipchip commented 3 years ago

Thank you so much! Is that make.hex in your GitHub already compiled to PDI ?

I intend to use this programmer now with arduino to program the ATXMEGA32E, must i compile the AVRDUDE to be compatible with the ATXMEGA32E ?

some tip to use this programmer with ARDUINO ?

thanks again

tcpipchip commented 3 years ago

@nieldk Can you confirm if i need to acquire other USBASP to program my USBASP ?

nieldk commented 3 years ago

you will need to put your usbasp in update mode, by shorting two pins. On mine, look at picture. You will need another programmer to do the update. Can be any that supports the ATMega chip on your usbasp. That could be another usbasp.

On Mon, Oct 25, 2021, 00:14 tcpipchip @.***> wrote:

@nieldk https://github.com/nieldk Can you confirm if i want to acquire other USBASP to program my USBASP ?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/nieldk/USBASP-PDI/issues/1#issuecomment-950404160, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QIOKPVLOQGMTKRO73H3UISANLANCNFSM5GRU2PLQ .