search

nightscout / AndroidAPS

Opensource automated insulin delivery system (closed loop)
https://wiki.aaps.app
GNU Affero General Public License v3.0
725 stars 1.76k forks source link

DST Dana RS stuck at reading history #1506

Closed mxsrm closed 2 years ago

mxsrm commented 2 years ago

After DST AAPS is now stuck at reading the pump history. Manually fixing the pump time (which was already updated manually) and resetting the APS databases did nothing. Even though the. Message disappears after some time, looping, setting temp ratios Etc. does not work.

AAPS 3.0.0.1

CaptainBalou commented 2 years ago

Same here. Can't bolus anymore. I'm sorry but i can't attach logs Herr because I'm mobile.

3.0.0.1-dev-g from three days ago

CaptainBalou commented 2 years ago

After issuing one bolus via the bolus calculator directly in the Pump AndroidAPS seems to work fine again. Bolus history can be read without error now.

CaptainBalou commented 2 years ago

AndroidAPS_LOG_1648366340572.log.zip

Finally i got the file uploaded. Hope this helps.

CaptainBalou commented 2 years ago

Also some additional screenshots If needed...

Screenshot_2022-03-27-09-23-09-50_3eaa31bb2c2a38a1c605d9dc918cf694

Screenshot_2022-03-27-09-31-54-74_3eaa31bb2c2a38a1c605d9dc918cf694

Screenshot_2022-03-27-09-45-32-68_3eaa31bb2c2a38a1c605d9dc918cf694

CaptainBalou commented 2 years ago

After the manually issued bolus via the Pump all Looks good which is like this:

Screenshot_2022-03-27-10-31-36-00_3eaa31bb2c2a38a1c605d9dc918cf694

As you can see also all data since DST change ist now covered in the chart.

mxsrm commented 2 years ago

I can confirm manually bolusing on the pump helps.

npsgr commented 2 years ago

The solution is “delete history” in DanaRS. The procedure is

  1. go to pump
  2. Unlock
  3. Then while pressing - at the same time press + sign and arrow
  4. Appears password 0000
  5. Go to third 0 and put 4
  6. Go to fourth 0 put 9
  7. Go to first 0 put 8
  8. Go to second 0 put 9
  9. All in this order
  10. Message then delete history.
pimeys commented 2 years ago

I've had this issue a few times in the past week already. Yes, the last message here fixes it for a few days, but it comes back eventually. It's not very nice when the connection gets stuck at night, and I don't notice any issues and I get low or high and need to wake up. The DanaRS has been working perfectly for three years with AndroidAPS. I had a replacement pump with the new firmware, which also worked over a month perfectly. When I got a new smartwatch, the problems started to appear.

Does anybody know what is the root issue here? Is it something to do with the pump clock not being sync with the watch or phone?

MilosKozak commented 2 years ago

@pimeys communication can be affected by connected watch if phone BT stack is not good. try not to use watch for some time

pimeys commented 2 years ago

It seems to be the cause. I disabled wifi from the watch and it's been much better now with the pump...