Insight Pump prime not reset canular time/date

nightscout / AndroidAPS

Opensource automated insulin delivery system (closed loop)

https://wiki.aaps.app

GNU Affero General Public License v3.0

696 stars 1.7k forks source link

Insight Pump prime not reset canular time/date #1615

Closed chrisbev closed 2 years ago

chrisbev commented 2 years ago

When an Infusion site change was made at the pump then the canular date/time was not made/updated in AAPS. AAPS 3.0.0.1 dev-i. Insight F/W V3.00.17. Around 20:57hrs. Log and screenshots attached. Treatment tab showing pump disconnect and connect with no prime in-between.

AndroidAPS._2022-04-1300-00-01.7.zip Screenshot_20220413-210324_AndroidAPS Screenshot_20220413-210127_AndroidAPS

Reporting bugs

Note the precise time the problem occurred and describe the circumstances and steps that caused the problem
Note the Build version (found in the About dialog in the app, when pressing the three dots in the upper-right corner).
Obtain the app's log files, which can be found on the phone in /storage/emulated/0/Android/data/info.nightscout.androidaps/ See https://androidaps.readthedocs.io/en/latest/EN/Usage/Accessing-logfiles.html
Open an issue at https://github.com/nightscout/AndroidAPS/issues/new

chrisbev commented 2 years ago

Cartridge and Tube changes are actioned in AAPS OK.

Philoul commented 2 years ago

How many U of insulin is injected by the pump when you prime Canula from your Pump? I'll try to prepare a version of AAPS with more log to analyse what could be wrong in your situation... (I made exactly same test on my side with my pump, same firmware, and it works)

I also don't understand why you made disconnection and re connection from overview... (as you can see in my screenshot, everything was done directly from pump). But it shouldn't impact results...

chrisbev commented 2 years ago

Because I was going to control pump from pump buttons I didn't want AAPS to interfere or get confused so thought it would be best to disconnect (can't remember if there was basal running at the time?). Canular prime 0.7U. I will try without disconnection.

Philoul commented 2 years ago

Canular prime 0.7U

Ok, so it should work. Let me make a dedicated version with more log in insight driver, to be able to trace and understand what could be wrong in your case (I'll try to do it this evening).

chrisbev commented 2 years ago

Hey, don't worry if only me hardly a big deal, it doesn’t coinside very often and easy workaround I mainly cannula change through AAPS you are busy with other things, it only started as a question on TDD which is now confirmed as OK.

Philoul commented 2 years ago

@chrisbev It's probably a stupid question, but have you checked if in Insight preferences, "Log site changes" setting is enabled?

chrisbev commented 2 years ago

@Philoul you are kind never a silly question you suspected right it was set off, don't know how/when. Thanks for investigating can only say sorry to have troubled you.

Philoul commented 2 years ago

Cool. You probably set this preference to off with aaps v2.8 (or earlier). A site change was always recorded with a reservoir change (this bug was only for Insight pump with firmware v3). I fixed this issue in Insight driver of aaps v3...