search

nightscout / Trio

MIT License
75 stars 385 forks source link

Implement Accu Check Combo as a pump #401

Open SSSerafin opened 3 weeks ago

SSSerafin commented 3 weeks ago

Hello, would it be possible to create in near future version which will slow to Connect iPhone and accu check combo, to let me have only one phone instead of two?

Sjoerd-Bo3 commented 3 weeks ago

Hello, would it be possible to create in near future version which will slow to Connect iPhone and accu check combo, to let me have only one phone instead of two?

Near future is? Developing a driver for a pomp will take several months to a year minimum. After someone decides to do it. It’s an old pump. There is no iOS implementation yet and therefore very unlikely. Better to try AAPS if you want to keep that pump. Or switch to a modern pump😊

Hope this helps!

LiroyvH commented 3 weeks ago

The last model sold of this one will EOL at the latest next year. Will they continue making infusion sets for it? (You see if not, then by the time the driver would be done it might not even be usable anymore heh.) If you want to quickly swap you may want to look to obtain an old Medtronic 7xx + *Link. They're compatible and their infusion sets are the same as Medtronic's current line-up so will be available for years to come.

SSSerafin commented 2 weeks ago

Is it possible also to work with 670G? or 740 would work as well?

MikePlante1 commented 2 weeks ago

Is it possible also to work with 670G? or 740 would work as well?

No. Only the following:

Medtronic 515 or 715 (any firmware) Medtronic 522 or 722 (any firmware) Medtronic 523 or 723 (firmware 2.4 or lower) Medtronic Worldwide Veo 554 or 754 (firmware 2.6A or lower) Medtronic Canadian/Australian Veo 554 or 754 (firmware 2.7A or lower)

If you want to quickly swap you may want to look to obtain an old Medtronic 7xx + *Link. They're compatible and their infusion sets are the same as Medtronic's current line-up so will be available for years to come.

Note that you can still use the 5xx series with the current 3.0 mL reservoirs, you just have to cut them first which is a bit of a hassle. I hear this tool makes that* easier, though: