search

nipunbatra / Home_Deployment

http://iawe.github.io
7 stars 5 forks source link

Creating list of controlled experiments for different sensors #52

Open nipunbatra opened 11 years ago

nipunbatra commented 11 years ago

@milan1267 @manojgulati @shailja1275

cc @amarjeet-iiitd

I am thinking that we need to label manually some data from each sensor, so as to have a clearer idea when we start analyzing the same. I would need help from all of you to create these scenarios and how to log them. For instance, for CT, i will turn one appliance at a time, for 5 minutes and note down the time of usage. For phone, i would note what is the sound level when fan is ON, noting the time, what is the light level when tube is on, when it is daytime, etc. For multi sensor, i would note light level when no light is ON, 1 light is ON, two lights are ON and so on, during the day what is light level, distance at which PIR is detecting motion. Water Meter: Water consumption of different fixtures. eg. If i run tap how much time does it take for 10litres and so on.

You may wish to do that in this wiki here https://github.com/nipunreddevil/Home_Deployment/wiki/Controlled-Experiments

Although i will look to these tests next week only, but i think we all need to think and ensure that to leverage maximum out of this deployment, we are able to properly label to maximum extent.

shailja-thakur commented 11 years ago

Do you want to see real time information of the sensors you talked ?

On Thu, Jun 27, 2013 at 12:34 PM, Nipun Batra notifications@github.comwrote:

@milan1267 https://github.com/milan1267 @manojgulatihttps://github.com/manojgulati @shailja1275 https://github.com/shailja1275

cc @amarjeet-iiitd https://github.com/amarjeet-iiitd

I am thinking that we need to label manually some data from each sensor, so as to have a clearer idea when we start analyzing the same. I would need help from all of you to create these scenarios and how to log them. For instance, for CT, i will turn one appliance at a time, for 5 minutes and note down the time of usage. For phone, i would note what is the sound level when fan is ON, noting the time, what is the light level when tube is on, when it is daytime, etc. For multi sensor, i would note light level when no light is ON, 1 light is ON, two lights are ON and so on, during the day what is light level, distance at which PIR is detecting motion. Water Meter: Water consumption of different fixtures. eg. If i run tap how much time does it take for 10litres and so on.

You may wish to do that in this wiki here https://github.com/nipunreddevil/Home_Deployment/wiki/Controlled-Experiments

Although i will look to these tests next week only, but i think we all need to think and ensure that to leverage maximum out of this deployment, we are able to properly label to maximum extent.

— Reply to this email directly or view it on GitHubhttps://github.com/nipunreddevil/Home_Deployment/issues/52 .

nipunbatra commented 11 years ago

No! I will manually note down events and later see them.

On Thu, Jun 27, 2013 at 1:46 PM, shailja1275 notifications@github.comwrote:

Do you want to see real time information of the sensors you talked ?

On Thu, Jun 27, 2013 at 12:34 PM, Nipun Batra notifications@github.comwrote:

@milan1267 https://github.com/milan1267 @manojgulati< https://github.com/manojgulati> @shailja1275 https://github.com/shailja1275

cc @amarjeet-iiitd https://github.com/amarjeet-iiitd

I am thinking that we need to label manually some data from each sensor, so as to have a clearer idea when we start analyzing the same. I would need help from all of you to create these scenarios and how to log them. For instance, for CT, i will turn one appliance at a time, for 5 minutes and note down the time of usage. For phone, i would note what is the sound level when fan is ON, noting the time, what is the light level when tube is on, when it is daytime, etc. For multi sensor, i would note light level when no light is ON, 1 light is ON, two lights are ON and so on, during the day what is light level, distance at which PIR is detecting motion. Water Meter: Water consumption of different fixtures. eg. If i run tap how much time does it take for 10litres and so on.

You may wish to do that in this wiki here

https://github.com/nipunreddevil/Home_Deployment/wiki/Controlled-Experiments

Although i will look to these tests next week only, but i think we all need to think and ensure that to leverage maximum out of this deployment, we are able to properly label to maximum extent.

— Reply to this email directly or view it on GitHub< https://github.com/nipunreddevil/Home_Deployment/issues/52> .

— Reply to this email directly or view it on GitHubhttps://github.com/nipunreddevil/Home_Deployment/issues/52#issuecomment-20103399 .

nipunbatra commented 11 years ago

Today @amarjeet-iiitd and @manojgulati suggested one controlled experiment for refrigerator power consumption. I put the ref. in different cooling modes and note down power consumption. I saw that the difference is interesting.

Would request you all to suggest stuff from your domain.

On Thu, Jun 27, 2013 at 2:31 PM, nipun batra nipunreddevil@gmail.comwrote:

No! I will manually note down events and later see them.

On Thu, Jun 27, 2013 at 1:46 PM, shailja1275 notifications@github.comwrote:

Do you want to see real time information of the sensors you talked ?

On Thu, Jun 27, 2013 at 12:34 PM, Nipun Batra notifications@github.comwrote:

@milan1267 https://github.com/milan1267 @manojgulati< https://github.com/manojgulati> @shailja1275 https://github.com/shailja1275

cc @amarjeet-iiitd https://github.com/amarjeet-iiitd

I am thinking that we need to label manually some data from each sensor, so as to have a clearer idea when we start analyzing the same. I would need help from all of you to create these scenarios and how to log them. For instance, for CT, i will turn one appliance at a time, for 5 minutes and note down the time of usage. For phone, i would note what is the sound level when fan is ON, noting the time, what is the light level when tube is on, when it is daytime, etc. For multi sensor, i would note light level when no light is ON, 1 light is ON, two lights are ON and so on, during the day what is light level, distance at which PIR is detecting motion. Water Meter: Water consumption of different fixtures. eg. If i run tap how much time does it take for 10litres and so on.

You may wish to do that in this wiki here

https://github.com/nipunreddevil/Home_Deployment/wiki/Controlled-Experiments

Although i will look to these tests next week only, but i think we all need to think and ensure that to leverage maximum out of this deployment, we are able to properly label to maximum extent.

— Reply to this email directly or view it on GitHub< https://github.com/nipunreddevil/Home_Deployment/issues/52> .

— Reply to this email directly or view it on GitHubhttps://github.com/nipunreddevil/Home_Deployment/issues/52#issuecomment-20103399 .

shailja-thakur commented 11 years ago

would be interesting to see the data of accelerometer and audio ,if the phone is kept on the refrigerator and see how often refrigerator is used .

On Thu, Jul 11, 2013 at 11:55 AM, Nipun Batra notifications@github.comwrote:

Today @amarjeet-iiitd and @manojgulati suggested one controlled experiment for refrigerator power consumption. I put the ref. in different cooling modes and note down power consumption. I saw that the difference is interesting.

Would request you all to suggest stuff from your domain.

On Thu, Jun 27, 2013 at 2:31 PM, nipun batra nipunreddevil@gmail.comwrote:

No! I will manually note down events and later see them.

On Thu, Jun 27, 2013 at 1:46 PM, shailja1275 notifications@github.comwrote:

Do you want to see real time information of the sensors you talked ?

On Thu, Jun 27, 2013 at 12:34 PM, Nipun Batra notifications@github.comwrote:

@milan1267 https://github.com/milan1267 @manojgulati< https://github.com/manojgulati> @shailja1275 https://github.com/shailja1275

cc @amarjeet-iiitd https://github.com/amarjeet-iiitd

I am thinking that we need to label manually some data from each sensor, so as to have a clearer idea when we start analyzing the same. I would need help from all of you to create these scenarios and how to log them. For instance, for CT, i will turn one appliance at a time, for 5 minutes and note down the time of usage. For phone, i would note what is the sound level when fan is ON, noting the time, what is the light level when tube is on, when it is daytime, etc. For multi sensor, i would note light level when no light is ON, 1 light is ON, two lights are ON and so on, during the day what is light level, distance at which PIR is detecting motion. Water Meter: Water consumption of different fixtures. eg. If i run tap how much time does it take for 10litres and so on.

You may wish to do that in this wiki here

https://github.com/nipunreddevil/Home_Deployment/wiki/Controlled-Experiments

Although i will look to these tests next week only, but i think we all need to think and ensure that to leverage maximum out of this deployment, we are able to properly label to maximum extent.

— Reply to this email directly or view it on GitHub< https://github.com/nipunreddevil/Home_Deployment/issues/52> .

— Reply to this email directly or view it on GitHub< https://github.com/nipunreddevil/Home_Deployment/issues/52#issuecomment-20103399>

.

— Reply to this email directly or view it on GitHubhttps://github.com/nipunreddevil/Home_Deployment/issues/52#issuecomment-20792594 .

amarjeet-iiitd commented 11 years ago

Added a bunch of things just now..

On Thu, Jul 11, 2013 at 11:55 AM, Nipun Batra notifications@github.comwrote:

Today @amarjeet-iiitd and @manojgulati suggested one controlled experiment for refrigerator power consumption. I put the ref. in different cooling modes and note down power consumption. I saw that the difference is interesting.

Would request you all to suggest stuff from your domain.

On Thu, Jun 27, 2013 at 2:31 PM, nipun batra nipunreddevil@gmail.comwrote:

No! I will manually note down events and later see them.

On Thu, Jun 27, 2013 at 1:46 PM, shailja1275 notifications@github.comwrote:

Do you want to see real time information of the sensors you talked ?

On Thu, Jun 27, 2013 at 12:34 PM, Nipun Batra notifications@github.comwrote:

@milan1267 https://github.com/milan1267 @manojgulati< https://github.com/manojgulati> @shailja1275 https://github.com/shailja1275

cc @amarjeet-iiitd https://github.com/amarjeet-iiitd

I am thinking that we need to label manually some data from each sensor, so as to have a clearer idea when we start analyzing the same. I would need help from all of you to create these scenarios and how to log them. For instance, for CT, i will turn one appliance at a time, for 5 minutes and note down the time of usage. For phone, i would note what is the sound level when fan is ON, noting the time, what is the light level when tube is on, when it is daytime, etc. For multi sensor, i would note light level when no light is ON, 1 light is ON, two lights are ON and so on, during the day what is light level, distance at which PIR is detecting motion. Water Meter: Water consumption of different fixtures. eg. If i run tap how much time does it take for 10litres and so on.

You may wish to do that in this wiki here

https://github.com/nipunreddevil/Home_Deployment/wiki/Controlled-Experiments

Although i will look to these tests next week only, but i think we all need to think and ensure that to leverage maximum out of this deployment, we are able to properly label to maximum extent.

— Reply to this email directly or view it on GitHub< https://github.com/nipunreddevil/Home_Deployment/issues/52> .

— Reply to this email directly or view it on GitHub< https://github.com/nipunreddevil/Home_Deployment/issues/52#issuecomment-20103399>

.

— Reply to this email directly or view it on GitHubhttps://github.com/nipunreddevil/Home_Deployment/issues/52#issuecomment-20792594 .

Best Regards

Amarjeet Singh, Asst. Professor, IIIT Delhi http://www.iiitd.edu.in/~amarjeet/