Andreunto
commented
10 months ago I tried to do this and it always stays on "search for android auto..."
Could it be because the Renault Medianav is based on Windows CE?
Closed DeadEnd0o7 closed 9 months ago
Andreunto
commented
10 months ago I tried to do this and it always stays on "search for android auto..."
Could it be because the Renault Medianav is based on Windows CE?
nisargjhaveri
commented
10 months ago This is likely because of some timeout issue with headunit. Try out the generated builds from #35, might help.
Andreunto
commented
10 months ago This is likely because of some timeout issue with headunit. Try out the generated builds from #35, might help.
I've already tried that build but it still doesn't work
nisargjhaveri
commented
10 months ago See if you can get some logs out? See Troubleshoot information in the README.
MrCrrispy
commented
10 months ago I have the same issue on my Hyundai Ioniq EV using Pixel 7a and pi zero w2
I have tried the other build but get stuck on "searching for Android auto".
Btw thanks so much for making this repo, I really hope I can get this working.
Here is a copy of my /var/log/messages `
Jan 1 00:00:03 buildroot syslog.info syslogd started: BusyBox v1.36.1 Jan 1 00:00:03 buildroot kern.notice kernel: klogd started: BusyBox v1.36.1 (2024-01-25 12:43:39 CET) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.000000] Linux version 6.1.61-v7 (root@Soyuz) (arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot 2023.11-620-g7a59c3a4d4) 12.3.0, GNU ld (GNU Binutils) 2.40) #1 SMP Thu Jan 25 13:25:59 CET 2024 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero 2 W Rev 1.0 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.000000] random: crng init done Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x15800000, size 64 MiB Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Zone ranges: Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000019bfffff] Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Normal empty Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Movable zone start for each node Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Early memory node ranges Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000019bfffff] Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000019bfffff] Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s18004 r8192 d22956 u49152 Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.000000] pcpu-alloc: s18004 r8192 d22956 u49152 alloc=12*4096 Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 104545 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:69:18:89 vc_mem.mem_base=0x1ec0000 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Memory: 337224K/421888K available (9216K kernel code, 718K rwdata, 2316K rodata, 1024K init, 520K bss, 19128K reserved, 65536K cma-reserved) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Tracing variant of Tasks RCU enabled. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000018] Switching to timer-based delay loop, resolution 52ns Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000345] Console: colour dummy device 80x30 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000857] printk: console [tty1] enabled Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000909] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000950] CPU: Testing write buffer coherency: ok Jan 1 00:00:03 buildroot kern.info kernel: [ 0.001009] pid_max: default: 32768 minimum: 301 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.001137] LSM: Security Framework initializing Jan 1 00:00:03 buildroot kern.info kernel: [ 0.001259] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.001296] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.002328] cgroup: Disabling memory control group subsystem Jan 1 00:00:03 buildroot kern.info kernel: [ 0.002852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.003619] cblist_init_generic: Setting adjustable number of callback queues. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.003649] cblist_init_generic: Setting shift to 2 and lim to 1. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.003785] Setting up static identity map for 0x100000 - 0x10003c Jan 1 00:00:03 buildroot kern.info kernel: [ 0.003919] rcu: Hierarchical SRCU implementation. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.003941] rcu: Max phase no-delay instances is 1000. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.004576] smp: Bringing up secondary CPUs ... Jan 1 00:00:03 buildroot kern.info kernel: [ 0.005367] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.006173] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.006898] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.006985] smp: Brought up 1 node, 4 CPUs Jan 1 00:00:03 buildroot kern.info kernel: [ 0.007057] SMP: Total of 4 processors activated (153.60 BogoMIPS). Jan 1 00:00:03 buildroot kern.info kernel: [ 0.007082] CPU: All CPU(s) started in HYP mode. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.007099] CPU: Virtualization extensions available. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.007714] devtmpfs: initialized Jan 1 00:00:03 buildroot kern.info kernel: [ 0.020019] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.020240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jan 1 00:00:03 buildroot kern.info kernel: [ 0.020289] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.022891] pinctrl core: initialized pinctrl subsystem Jan 1 00:00:03 buildroot kern.info kernel: [ 0.023882] NET: Registered PF_NETLINK/PF_ROUTE protocol family Jan 1 00:00:03 buildroot kern.info kernel: [ 0.026157] DMA: preallocated 1024 KiB pool for atomic coherent allocations Jan 1 00:00:03 buildroot kern.info kernel: [ 0.030715] audit: initializing netlink subsys (disabled) Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.030960] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.031458] thermal_sys: Registered thermal governor 'step_wise' Jan 1 00:00:03 buildroot kern.info kernel: [ 0.031726] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.031775] hw-breakpoint: maximum watchpoint size is 8 bytes. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.031977] Serial: AMBA PL011 UART driver Jan 1 00:00:03 buildroot kern.info kernel: [ 0.037485] bcm2835-mbox 3f00b880.mailbox: mailbox enabled Jan 1 00:00:03 buildroot kern.info kernel: [ 0.050013] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:42:39, variant start Jan 1 00:00:03 buildroot kern.info kernel: [ 0.060028] raspberrypi-firmware soc:firmware: Firmware hash is 30f0c5e4d076da3ab4f341d88e7d505760b93ad7 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.098329] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.099999] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.101615] SCSI subsystem initialized Jan 1 00:00:03 buildroot kern.info kernel: [ 0.101819] usbcore: registered new interface driver usbfs Jan 1 00:00:03 buildroot kern.info kernel: [ 0.101885] usbcore: registered new interface driver hub Jan 1 00:00:03 buildroot kern.info kernel: [ 0.101944] usbcore: registered new device driver usb Jan 1 00:00:03 buildroot kern.warn kernel: [ 0.102131] usb_phy_generic phy: supply vcc not found, using dummy regulator Jan 1 00:00:03 buildroot kern.info kernel: [ 0.102463] pps_core: LinuxPPS API ver. 1 registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.102486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it Jan 1 00:00:03 buildroot kern.info kernel: [ 0.102531] PTP clock support registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.103820] clocksource: Switched to clocksource arch_sys_counter Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.104110] VFS: Disk quotas dquot_6.6.0 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.104181] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.104333] FS-Cache: Loaded Jan 1 00:00:03 buildroot kern.info kernel: [ 0.104560] CacheFiles: Loaded Jan 1 00:00:03 buildroot kern.info kernel: [ 0.112868] NET: Registered PF_INET protocol family Jan 1 00:00:03 buildroot kern.info kernel: [ 0.113097] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.114820] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.114888] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.114968] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.115055] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.115240] TCP: Hash tables configured (established 4096 bind 4096) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.115364] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.115414] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.115618] NET: Registered PF_UNIX/PF_LOCAL protocol family Jan 1 00:00:03 buildroot kern.info kernel: [ 0.116082] RPC: Registered named UNIX socket transport module. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.116109] RPC: Registered udp transport module. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.116128] RPC: Registered tcp transport module. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.116146] RPC: Registered tcp NFSv4.1 backchannel transport module. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.117129] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.118228] Initialise system trusted keyrings Jan 1 00:00:03 buildroot kern.info kernel: [ 0.118386] workingset: timestamp_bits=14 max_order=17 bucket_order=3 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.124579] zbud: loaded Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.126439] NFS: Registering the id_resolver key type Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.126486] Key type id_resolver registered Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.126506] Key type id_legacy registeredJan 1 00:00:03 buildroot kern.info kernel: [ 0.126614] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jan 1 00:00:03 buildroot kern.info kernel: [ 0.126641] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.127701] Key type asymmetric registered Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.127726] Asymmetric key parser 'x509' registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.127873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.127905] io scheduler mq-deadline registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.127927] io scheduler kyber registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.130593] bcm2708_fb soc:fb: FB found 1 display(s) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.142238] Console: switching to colour frame buffer device 90x30 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.148829] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 720x480 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.154528] bcm2835-rng 3f104000.rng: hwrng registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.157013] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.171055] brd: module loaded Jan 1 00:00:03 buildroot kern.info kernel: [ 0.178128] loop: module loaded Jan 1 00:00:03 buildroot kern.info kernel: [ 0.180967] Loading iSCSI transport class v2.0-870. Jan 1 00:00:03 buildroot kern.info kernel: [ 0.184573] usbcore: registered new interface driver lan78xx Jan 1 00:00:03 buildroot kern.info kernel: [ 0.186935] usbcore: registered new interface driver smsc95xx Jan 1 00:00:03 buildroot kern.info kernel: [ 0.189172] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.191493] dwc_otg: FIQ enabled Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.191501] dwc_otg: NAK holdoff enabled Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.191507] dwc_otg: FIQ split-transaction FSM enabled Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.191519] Module dwc_common_port init Jan 1 00:00:03 buildroot kern.info kernel: [ 0.191712] usbcore: registered new interface driver usb-storage Jan 1 00:00:03 buildroot kern.info kernel: [ 0.194135] mousedev: PS/2 mouse device common for all mice Jan 1 00:00:03 buildroot kern.info kernel: [ 0.197640] sdhci: Secure Digital Host Controller Interface driver Jan 1 00:00:03 buildroot kern.info kernel: [ 0.199950] sdhci: Copyright(c) Pierre Ossman Jan 1 00:00:03 buildroot kern.info kernel: [ 0.202375] sdhci-pltfm: SDHCI platform and OF driver helper Jan 1 00:00:03 buildroot kern.info kernel: [ 0.205305] ledtrig-cpu: registered to indicate activity on CPUs Jan 1 00:00:03 buildroot kern.info kernel: [ 0.207784] hid: raw HID events driver (C) Jiri Kosina Jan 1 00:00:03 buildroot kern.info kernel: [ 0.210111] usbcore: registered new interface driver usbhid Jan 1 00:00:03 buildroot kern.info kernel: [ 0.212370] usbhid: USB HID core driver Jan 1 00:00:03 buildroot kern.info kernel: [ 0.214675] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default Jan 1 00:00:03 buildroot kern.info kernel: [ 0.220440] Initializing XFRM netlink socket Jan 1 00:00:03 buildroot kern.info kernel: [ 0.222759] NET: Registered PF_PACKET protocol family Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.225191] Key type dns_resolver registered Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.227622] Registering SWP/SWPB emulation handler Jan 1 00:00:03 buildroot kern.info kernel: [ 0.230073] registered taskstats version 1 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.232309] Loading compiled-in X.509 certificates Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.235094] Key type .fscrypt registered Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.237196] Key type fscrypt-provisioning registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.243882] uart-pl011 3f201000.serial: cts_event_workaround enabled Jan 1 00:00:03 buildroot kern.info kernel: [ 0.246140] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.250699] serial serial0: tty port ttyAMA1 registered Jan 1 00:00:03 buildroot kern.info kernel: [ 0.254236] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer Jan 1 00:00:03 buildroot kern.info kernel: [ 0.256825] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver Jan 1 00:00:03 buildroot kern.info kernel: [ 0.260301] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.262691] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated Jan 1 00:00:03 buildroot kern.info kernel: [ 0.293207] sdhost: log_buf @ 30797a33 (d5910000) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.343879] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.346414] of_cfs_init Jan 1 00:00:03 buildroot kern.info kernel: [ 0.348911] of_cfs_init: OK Jan 1 00:00:03 buildroot kern.info kernel: [ 0.352077] Waiting for root device /dev/mmcblk0p2... Jan 1 00:00:03 buildroot kern.warn kernel: [ 0.381750] mmc0: host does not support reading read-only switch, assuming write-enable Jan 1 00:00:03 buildroot kern.info kernel: [ 0.387680] mmc0: new high speed SD card at address 0002 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.390714] mmcblk0: mmc0:0002 00000 1.87 GiB Jan 1 00:00:03 buildroot kern.info kernel: [ 0.397478] mmcblk0: p1 p2 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.400117] mmcblk0: mmc0:0002 00000 1.87 GiB Jan 1 00:00:03 buildroot kern.info kernel: [ 0.421254] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem Jan 1 00:00:03 buildroot kern.info kernel: [ 0.423576] EXT4-fs (mmcblk0p2): write access will be enabled during recovery Jan 1 00:00:03 buildroot kern.info kernel: [ 0.426774] mmc1: new high speed SDIO card at address 0001 Jan 1 00:00:03 buildroot kern.info kernel: [ 1.337295] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs Jan 1 00:00:03 buildroot kern.info kernel: [ 1.339771] EXT4-fs (mmcblk0p2): recovery complete Jan 1 00:00:03 buildroot kern.info kernel: [ 1.353114] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. Jan 1 00:00:03 buildroot kern.info kernel: [ 1.357896] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. Jan 1 00:00:03 buildroot kern.info kernel: [ 1.361692] devtmpfs: mounted Jan 1 00:00:03 buildroot kern.info kernel: [ 1.365848] Freeing unused kernel image (initmem) memory: 1024K Jan 1 00:00:03 buildroot kern.info kernel: [ 1.374244] Run /sbin/init as init process Jan 1 00:00:03 buildroot kern.debug kernel: [ 1.376567] with arguments: Jan 1 00:00:03 buildroot kern.debug kernel: [ 1.376573] /sbin/init Jan 1 00:00:03 buildroot kern.debug kernel: [ 1.376579] with environment: Jan 1 00:00:03 buildroot kern.debug kernel: [ 1.376585] HOME=/ Jan 1 00:00:03 buildroot kern.debug kernel: [ 1.376591] TERM=linux Jan 1 00:00:03 buildroot kern.info kernel: [ 1.627182] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Jan 1 00:00:03 buildroot kern.notice kernel: [ 2.110576] cfg80211: Loading compiled-in X.509 certificates for regulatory database Jan 1 00:00:03 buildroot kern.notice kernel: [ 2.180848] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' Jan 1 00:00:03 buildroot kern.notice kernel: [ 2.193280] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' Jan 1 00:00:03 buildroot kern.notice kernel: [ 2.200993] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Jan 1 00:00:03 buildroot kern.debug kernel: [ 2.317229] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.322022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.328031] usbcore: registered new interface driver brcmfmac Jan 1 00:00:03 buildroot kern.warn kernel: [ 2.330932] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-2-w.bin failed with error -2 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.521776] Bluetooth: Core ver 2.22 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.524753] NET: Registered PF_BLUETOOTH protocol family Jan 1 00:00:03 buildroot kern.info kernel: [ 2.527620] Bluetooth: HCI device and connection manager initialized Jan 1 00:00:03 buildroot kern.info kernel: [ 2.530507] Bluetooth: HCI socket layer initialized Jan 1 00:00:03 buildroot kern.info kernel: [ 2.533333] Bluetooth: L2CAP socket layer initialized Jan 1 00:00:03 buildroot kern.info kernel: [ 2.536188] Bluetooth: SCO socket layer initialized Jan 1 00:00:03 buildroot kern.info kernel: [ 2.562529] Bluetooth: HCI UART driver ver 2.3 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.565316] Bluetooth: HCI UART protocol H4 registered Jan 1 00:00:03 buildroot kern.info kernel: [ 2.568018] Bluetooth: HCI UART protocol Three-wire (H5) registered Jan 1 00:00:03 buildroot kern.info kernel: [ 2.569123] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.570784] Bluetooth: HCI UART protocol Broadcom registered Jan 1 00:00:03 buildroot kern.warn kernel: [ 2.570966] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator Jan 1 00:00:03 buildroot kern.warn kernel: [ 2.571087] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator Jan 1 00:00:03 buildroot kern.info kernel: [ 2.691344] uart-pl011 3f201000.serial: no DMA platform data Jan 1 00:00:03 buildroot kern.info kernel: [ 2.934567] Bluetooth: hci0: BCM: chip id 94 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.937524] Bluetooth: hci0: BCM: features 0x2e Jan 1 00:00:03 buildroot kern.info kernel: [ 2.941152] Bluetooth: hci0: BCM43430A1 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.943493] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000 Jan 1 00:00:03 buildroot kern.info kernel: [ 2.951130] Bluetooth: hci0: BCM43430A1 'brcm/BCM43430A1.hcd' Patch Jan 1 00:00:03 buildroot kern.warn kernel: [ 3.422246] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator Jan 1 00:00:03 buildroot kern.warn kernel: [ 3.424664] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator Jan 1 00:00:03 buildroot kern.info kernel: [ 3.524585] Bluetooth: hci0: BCM: features 0x2e Jan 1 00:00:03 buildroot kern.info kernel: [ 3.527900] Bluetooth: hci0: BCM43438A1 37.4MHz Raspberry Pi 3-0141 Jan 1 00:00:03 buildroot kern.info kernel: [ 3.527906] dwc2 3f980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM Jan 1 00:00:03 buildroot kern.info kernel: [ 3.529938] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0508 Jan 1 00:00:03 buildroot daemon.notice haveged: haveged starting up Jan 1 00:00:03 buildroot daemon.info rngd: Initializing available sources Jan 1 00:00:03 buildroot daemon.info rngd: [hwrng ]: Initialized Jan 1 00:00:03 buildroot daemon.info rngd: [jitter]: JITTER timeout set to 5 sec Jan 1 00:00:04 buildroot daemon.info bluetoothd[163]: Bluetooth daemon 5.68 Jan 1 00:00:04 buildroot daemon.info bluetoothd[163]: Starting SDP server Jan 1 00:00:04 buildroot daemon.warn bluetoothd[163]: src/plugin.c:plugin_init() System does not support csip plugin Jan 1 00:00:04 buildroot daemon.warn bluetoothd[163]: src/plugin.c:plugin_init() System does not support bass plugin Jan 1 00:00:04 buildroot daemon.warn bluetoothd[163]: profiles/network/bnep.c:bnep_init() kernel lacks bnep-protocol support Jan 1 00:00:04 buildroot daemon.warn bluetoothd[163]: src/plugin.c:plugin_init() System does not support network plugin Jan 1 00:00:04 buildroot daemon.info bluetoothd[163]: Bluetooth management interface 1.22 initialized Jan 1 00:00:04 buildroot kern.info kernel: [ 4.272634] Bluetooth: MGMT ver 1.22 Jan 1 00:00:04 buildroot kern.info kernel: [ 4.295169] NET: Registered PF_ALG protocol family Jan 1 00:00:04 buildroot kern.info kernel: [ 4.342104] cryptd: max_cpu_qlen set to 1000 Jan 1 00:00:04 buildroot kern.info kernel: [ 4.912136] NET: Registered PF_INET6 protocol family Jan 1 00:00:04 buildroot authpriv.info dropbear[221]: Running in background Jan 1 00:00:04 buildroot daemon.info rngd: [jitter]: Initializing AES buffer Jan 1 00:00:04 buildroot kern.info kernel: [ 4.924834] Segment Routing with IPv6 Jan 1 00:00:04 buildroot kern.info kernel: [ 4.926872] In-situ OAM (IOAM) with IPv6 Jan 1 00:00:04 buildroot daemon.info dnsmasq[227]: started, version 2.89 cachesize 150 Jan 1 00:00:04 buildroot daemon.info dnsmasq[227]: compile time options: IPv6 GNU-getopt DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-nftset auth no-cryptohash no-DNSSEC loop-detect inotify dumpfile Jan 1 00:00:04 buildroot daemon.info dnsmasq-dhcp[227]: DHCP, IP range 10.0.0.2 -- 10.0.0.20, lease time 12h Jan 1 00:00:04 buildroot daemon.info dnsmasq[227]: read /etc/hosts - 2 names Jan 1 00:00:05 buildroot kern.info kernel: [ 5.179695] file system registered Jan 1 00:00:05 buildroot kern.info kernel: [ 5.261952] read descriptors Jan 1 00:00:05 buildroot kern.info kernel: [ 5.264012] read strings Jan 1 00:00:06 buildroot user.info usb_gadget: Enabled default usb gadget Jan 1 00:00:06 buildroot daemon.info : starting pid 262, tty '/dev/tty1': '/sbin/getty -L tty1 0 vt100 ' Jan 1 00:00:06 buildroot user.info aawgd[261]: AA Wireless Dongle Jan 1 00:00:06 buildroot user.info aawgd[261]: Starting uevent monitoring Jan 1 00:00:06 buildroot user.info aawgd[261]: Uevent monitoring started Jan 1 00:00:06 buildroot user.info aawgd[261]: Initializing USB Manager Jan 1 00:00:06 buildroot user.info aawgd[261]: USB Manager: Disabled all USB gadgets Jan 1 00:00:06 buildroot user.info aawgd[261]: USB Manager: Found UDC 3f980000.usb Jan 1 00:00:06 buildroot user.info aawgd[261]: Unique Name: :1.2 Jan 1 00:00:06 buildroot user.info aawgd[261]: Using bluetooth adapter at path: /org/bluez/hci0 Jan 1 00:00:06 buildroot kern.info kernel: [ 6.633947] Bluetooth: RFCOMM TTY layer initialized Jan 1 00:00:06 buildroot kern.info kernel: [ 6.635792] Bluetooth: RFCOMM socket layer initialized Jan 1 00:00:06 buildroot kern.info kernel: [ 6.637584] Bluetooth: RFCOMM ver 1.11 Jan 1 00:00:06 buildroot user.info aawgd[261]: Bluetooth AA Wireless profile active Jan 1 00:00:06 buildroot user.info aawgd[261]: HSP Handset profile active Jan 1 00:00:06 buildroot user.info aawgd[261]: USB Manager: Enabled default gadget Jan 1 00:00:06 buildroot kern.info kernel: [ 6.655134] dwc2 3f980000.usb: bound driver configfs-gadget.default Jan 1 00:00:07 buildroot kern.info kernel: [ 7.137787] dwc2 3f980000.usb: new device is high-speed Jan 1 00:00:07 buildroot kern.info kernel: [ 7.251985] dwc2 3f980000.usb: new device is high-speed Jan 1 00:00:07 buildroot kern.info kernel: [ 7.361817] dwc2 3f980000.usb: new address 2 Jan 1 00:00:07 buildroot kern.info kernel: [ 7.381997] android_work: sent uevent USB_STATE=CONNECTED Jan 1 00:00:07 buildroot kern.info kernel: [ 7.388441] android_work: sent uevent USB_STATE=CONFIGURED Jan 1 00:00:07 buildroot user.info aawgd[261]: USB Manager: Received accessory start request Jan 1 00:00:07 buildroot user.info aawgd[261]: USB Manager: Switched to accessory gadget from default Jan 1 00:00:07 buildroot kern.info kernel: [ 7.465226] android_work: sent uevent USB_STATE=DISCONNECTED Jan 1 00:00:07 buildroot kern.info kernel: [ 7.467037] dwc2 3f980000.usb: bound driver configfs-gadget.accessory Jan 1 00:00:07 buildroot user.info aawgd[261]: Starting tcp server Jan 1 00:00:07 buildroot user.info aawgd[261]: Tcp server listening on 5288 Jan 1 00:00:07 buildroot user.info aawgd[261]: Bluetooth adapter was powered on Jan 1 00:00:07 buildroot user.info aawgd[261]: Bluetooth adapter is now discoverable and pairable Jan 1 00:00:07 buildroot user.info aawgd[261]: Found 1 bluetooth devices Jan 1 00:00:07 buildroot user.info aawgd[261]: Trying to connect bluetooth device at path: /org/bluez/hci0/dev_E8_D5_2B_7A_04_A6 Jan 1 00:00:07 buildroot kern.info kernel: [ 7.712052] dwc2 3f980000.usb: new device is high-speed Jan 1 00:00:07 buildroot kern.info kernel: [ 7.772068] dwc2 3f980000.usb: new device is high-speed Jan 1 00:00:07 buildroot kern.info kernel: [ 7.831993] dwc2 3f980000.usb: new device is high-speed Jan 1 00:00:07 buildroot kern.info kernel: [ 7.932072] dwc2 3f980000.usb: new address 3 Jan 1 00:00:07 buildroot kern.info kernel: [ 7.952056] android_work: sent uevent USB_STATE=CONNECTED Jan 1 00:00:07 buildroot kern.info kernel: [ 7.962326] android_work: sent uevent USB_STATE=CONFIGURED Jan 1 00:00:08 buildroot user.info aawgd[261]: HSP HS NewConnection Jan 1 00:00:08 buildroot user.info aawgd[261]: Path: /org/bluez/hci0/dev_E8_D5_2B_7A_04_A6, fd: 11 Jan 1 00:00:08 buildroot user.info aawgd[261]: Bluetooth connected to the device Jan 1 00:00:08 buildroot daemon.info rngd: [jitter]: Unable to obtain AES key, disabling JITTER source Jan 1 00:00:08 buildroot daemon.err rngd: [jitter]: Initialization Failed Jan 1 00:00:13 buildroot user.info aawgd[261]: AA Wireless NewConnection Jan 1 00:00:13 buildroot user.info aawgd[261]: Path: /org/bluez/hci0/dev_E8_D5_2B_7A_04_A6, fd: 12 Jan 1 00:00:13 buildroot user.info aawgd[261]: Sending WifiStartRequest (ip: 10.0.0.1, port: 5288) Jan 1 00:00:13 buildroot user.info aawgd[261]: Sent WifiStartRequest, messageId: 1, wrote 17 bytes Jan 1 00:00:13 buildroot user.info aawgd[261]: Read WifiInfoRequest. length: 0, messageId: 2 Jan 1 00:00:13 buildroot user.info aawgd[261]: Sending WifiInfoResponse (ssid: AAWirelessDongle, bssid: d8:3a:dd:bd:32:9e) Jan 1 00:00:13 buildroot user.info aawgd[261]: Sent WifiInfoResponse, messageId: 3, wrote 70 bytes Jan 1 00:00:13 buildroot user.info aawgd[261]: Read WifiStartResponse. length: 2, messageId: 7 Jan 1 00:00:28 buildroot daemon.info hostapd: wlan0: STA 3e:7f:7f:b9:d9:fd IEEE 802.11: associated Jan 1 00:00:32 buildroot daemon.info hostapd: wlan0: STA 3e:7f:7f:b9:d9:fd IEEE 802.11: disassociated Jan 1 00:00:32 buildroot user.info aawgd[261]: Read WifiConnectStatus. length: 11, messageId: 6 Jan 1 00:00:32 buildroot user.info aawgd[261]: Bluetooth launch sequence completed Jan 1 00:00:32 buildroot daemon.err bluetoothd[163]: src/adv_monitor.c:btd_adv_monitor_power_down() Unexpected NULL btd_adv_monitor_manager object upon power down Jan 1 00:00:32 buildroot daemon.err bluetoothd[163]: src/profile.c:ext_io_disconnected() Unable to get io data for HSP HS: getpeername: Transport endpoint is not connected (107) Jan 1 00:00:32 buildroot daemon.err bluetoothd[163]: src/profile.c:ext_io_disconnected() Unable to get io data for AA Wireless: getpeername: Transport endpoint is not connected (107) Jan 1 00:00:32 buildroot user.info aawgd[261]: Bluetooth adapter was powered off Jan 1 00:00:37 buildroot daemon.info hostapd: wlan0: STA 16:b4:a2:c8:d2:0e IEEE 802.11: associated Jan 1 00:00:37 buildroot daemon.info hostapd: wlan0: STA 16:b4:a2:c8:d2:0e WPA: pairwise key handshake completed (RSN) Jan 1 00:00:40 buildroot daemon.info dnsmasq-dhcp[227]: DHCPDISCOVER(wlan0) 16:b4:a2:c8:d2:0e Jan 1 00:00:40 buildroot daemon.info dnsmasq-dhcp[227]: DHCPOFFER(wlan0) 10.0.0.6 16:b4:a2:c8:d2:0e Jan 1 00:00:40 buildroot daemon.info dnsmasq-dhcp[227]: DHCPDISCOVER(wlan0) 16:b4:a2:c8:d2:0e Jan 1 00:00:40 buildroot daemon.info dnsmasq-dhcp[227]: DHCPOFFER(wlan0) 10.0.0.6 16:b4:a2:c8:d2:0e Jan 1 00:00:40 buildroot daemon.info dnsmasq-dhcp[227]: DHCPREQUEST(wlan0) 10.0.0.6 16:b4:a2:c8:d2:0e Jan 1 00:00:40 buildroot daemon.info dnsmasq-dhcp[227]: DHCPACK(wlan0) 10.0.0.6 16:b4:a2:c8:d2:0e Henrik-Pixel-7a Jan 1 00:02:33 buildroot daemon.info hostapd: wlan0: STA 16:b4:a2:c8:d2:0e IEEE 802.11: disassociated Jan 1 00:02:33 buildroot daemon.info hostapd: wlan0: STA 16:b4:a2:c8:d2:0e IEEE 802.11: disassociated Jan 1 00:02:33 buildroot daemon.info hostapd: wlan0: STA 16:b4:a2:c8:d2:0e IEEE 802.11: disassociated Jan 1 00:02:39 buildroot daemon.info hostapd: wlan0: STA 16:b4:a2:c8:d2:0e IEEE 802.11: associated Jan 1 00:02:39 buildroot daemon.info hostapd: wlan0: STA 16:b4:a2:c8:d2:0e WPA: pairwise key handshake completed (RSN) Jan 1 00:02:39 buildroot daemon.info dnsmasq-dhcp[227]: DHCPREQUEST(wlan0) 10.0.0.6 16:b4:a2:c8:d2:0e Jan 1 00:02:39 buildroot daemon.info dnsmasq-dhcp[227]: DHCPACK(wlan0) 10.0.0.6 16:b4:a2:c8:d2:0e Henrik-Pixel-7a Jan 1 00:02:43 buildroot authpriv.info dropbear[269]: Child connection from 10.0.0.6:40982 Jan 1 00:02:43 buildroot authpriv.notice dropbear[269]: Password auth succeeded for 'root' from 10.0.0.6:40982
Jan 1 00:00:03 buildroot syslog.info syslogd started: BusyBox v1.36.1 Jan 1 00:00:03 buildroot kern.notice kernel: klogd started: BusyBox v1.36.1 (2024-01-25 12:43:39 CET) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.000000] Linux version 6.1.61-v7 (root@Soyuz) (arm-buildroot-linux-gnueabihf-gcc.br_real (Buildroot 2023.11-620-g7a59c3a4d4) 12.3.0, GNU ld (GNU Binutils) 2.40) #1 SMP Thu Jan 25 13:25:59 CET 2024 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero 2 W Rev 1.0 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.000000] random: crng init done Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x15800000, size 64 MiB Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Zone ranges: Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000019bfffff] Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Normal empty Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Movable zone start for each node Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Early memory node ranges Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000019bfffff] Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000019bfffff] Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu s18004 r8192 d22956 u49152 Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.000000] pcpu-alloc: s18004 r8192 d22956 u49152 alloc=12*4096 Jan 1 00:00:03 buildroot kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 104545 Jan 1 00:00:03 buildroot kern.notice kernel: [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:69:18:89 vc_mem.mem_base=0x1ec0000 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] Memory: 337224K/421888K available (9216K kernel code, 718K rwdata, 2316K rodata, 1024K init, 520K bss, 19128K reserved, 65536K cma-reserved) Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jan 1 00:00:03 buildroot kern.info kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Jan 1 00:00:03 buildroot `
MrCrrispy
commented
10 months ago Could this be the main issue?
Jan 1 00:00:08 buildroot daemon.info rngd: [jitter]: Unable to obtain AES key, disabling JITTER source
nisargjhaveri
commented
10 months ago I've seen rngd often complain about this. It generate works fine even this being logged.
Something looks wrong here. The phone connects to the associates with the wifi but gets disassociated in around 4 seconds. And the WifiConnectStatus sees to be some error (length not equal to 2 generally indicates some error).
Try connecting to the WiFi directly? Does the phone connect okay with the raspi wifi? Do you have vpn connected when this happens?
Jan 1 00:00:13 buildroot user.info aawgd[261]: Read WifiStartResponse. length: 2, messageId: 7
Jan 1 00:00:28 buildroot daemon.info hostapd: wlan0: STA 3e:7f:7f:b9:d9:fd IEEE 802.11: associated
Jan 1 00:00:32 buildroot daemon.info hostapd: wlan0: STA 3e:7f:7f:b9:d9:fd IEEE 802.11: disassociated
Jan 1 00:00:32 buildroot user.info aawgd[261]: Read WifiConnectStatus. length: 11, messageId: 6I am connecting to the dongle wifi from my phone to get the logs, so that works fine.
I use VPN, and I have tested with VPN On and VPN off, none of them work.
I did another test today and I got a popup on the phone saying something like "Continue using Android auto on the car screen". Then after a few seconds on my car screen I get a message saying "Phone is not responding"
Saved the log but it looks very similar I think.
nisargjhaveri
commented
10 months ago Okay, next would be to have verbose logging for hostapd. You can try passing -dd from the init file you'd have in /etc/init.d/ for hostapd?
MrCrrispy
commented
10 months ago I set verbose in hostapd.conf using
logger_syslog=-1 logger_syslog_level=0
nisargjhaveri
commented
9 months ago This is very strange, this time the communication did start and then stopped and Wifi disconnected some time later. The last log looks like USB might've stopped working. Please check the cable, seems like a common issue? Though the earlier logs were different.
MrCrrispy
commented
9 months ago I tested 9 different usb cables, and checked that they work on my PC before but no improvement.
I have not been able to get the communication to start as it did in the previous log, not sure what I did different that time.
I also tested with a another phone (Samsung A40) but no success. However with the Samsung I first paired bluetooth and it then switched to wifi, but the phone was saying "wrong password" and would not connect to wifi. So I connected to wifi manually first and entered the password, and then connected to bluetooth again and it was able to connect like on my Pixel, but then getting disassociated like before.
I was expecting that the wifi password would be shared over bluetooth and that I would not need to enter it manually, is that not the way it is supposed to be?
I can mention that I have changed both the root and wifi password and is not using the default, but that should not be an issue right?
MrCrrispy
commented
9 months ago I did some file searching and discovered that the wifi password was also set in the common.cpp file, so I updated that as well, I also tested using the default passwords everywhere. But still no improvement.
nisargjhaveri
commented
9 months ago If you're trying to use a different password than the default one you can have a look at https://github.com/nisargjhaveri/AAWirelessDongle/issues/42.
Changing root password should not be an issue.
You should not need to specify the password on phone. The AA connection protocol should take care of it.
MrCrrispy
commented
9 months ago So...turns out my issue was purely incompetens on my part. I was still on the main branch and had not switched to the "optimistic phone connection" branch as I thought I did.
So after switching everything now works perfectly!
Big thanks for your help @nisargjhaveri, sorry for wasting your time.
nisargjhaveri
commented
9 months ago Glad that you were able to make it work. The "optimistic phone connection" changes are now merged in main branch. The lastest builds from main should also probably work for you in that case.
chanakyaraichur
commented
9 months ago @nisargjhaveri @MrCrrispy Can you provide image for raspberrypi0w with this fix ? I am facing issues in making the build .
borsosgy
commented
9 months ago Hi nisargjhaveri, First of all I would like to say a big thank you for your efforts.
I had the same problem as MrCrrispy. My LOG was almost the same, I also tested lots of USB cables. The problem was the same, the head unit timing was bad. After starting the AAWirelessDongle, the Bluetooth connection was not established so quickly and the head unit reported errors. I made the new build (https://github.com/nisargjhaveri/AAWirelessDongle/pull/35 "optimistic phone connection") on Pi Zero 1.1.(pi0w) The "optimistic phone connection" function works, but now the Bluetooth communication fails and does not return. This means that AAWirelessDogle is paired with the cell phone via Bluetooth, --> Android Auto starts automatically on the Headunit, --> the Bluetooth connection between AAWirelessDongle and Phone fails, -->Android Auto started works, but without Bluetooth connection, so the sound doesn't work on the hay unit.
Do you have an idea what I could do?
thanks in advance
Gyula
borsosgy
commented
9 months ago I made the new image from the source: git clone --recurse-submodules https://github.com/nisargjhaveri/AAWirelessDongle I think that should be good, right?
nisargjhaveri
commented
9 months ago @borsosgy the source looks correct, you can see the instructions in the README as well. Also, could you please create another issue on calls not working over bluetooth? It seems different than the original issue here.
nisargjhaveri
commented
9 months ago @chanakyaraichur you can download the latest artefacts from recent builds for main branch. https://github.com/nisargjhaveri/AAWirelessDongle/actions?query=branch%3Amain
nisargjhaveri
commented
9 months ago I'll close this issue as it had digressed from the original report. Feel free to create another issue or reopen if it is very similar.
There is a need to reconnect the usb to get a connection where it gets stuck at searching for android auto but after that it works as expected. Tested on TATA Tiago. Is there a possibility to do a similar setup for apple carplay?