nitaybz / homebridge-broadlink-s1c

Homebridge plugin for Broadlink S1C Sensors - SmartOne Alarm Kit"
MIT License
10 stars 2 forks source link

Sensor Not Working Properly #10

Open NexGen-3D-Printing opened 6 years ago

NexGen-3D-Printing commented 6 years ago

Hi,

Not sure if others have this issue, but after a few hours my sensors are switching from open to close continuously at 1 second intervals or they are frozen in a state and are not responding, if I cycle the power on the S1C gateway, the problem will resolve itself, but only for a period of time.

I'm using the Eve app to view everything, but the system seems to be unreliable, as I can set the alarm, at night, wake the next morning, the app reports the alarm is active, but if I try and trigger a sensor, it does nothing, and the sensor will not be responding in the app until I cycle the power again.

I have found absolutely zero info anywhere on this system, if anyone has a similar issue or a possible fix, let me know as I'm about to ditch this thing and start again.

NexGen-3D-Printing commented 6 years ago

Is no one having issues with the S1C?

I'm seeing this all the time without touching a sensor:

[2018-8-23 06:18:24] [Alarm System] Patio Door state is - Open [2018-8-23 06:18:24] [Alarm System] Patio Door state is - Close [2018-8-23 06:18:24] [Alarm System] Garage Door state is - Open [2018-8-23 06:18:24] [Alarm System] Garage Door state is - Close [2018-8-23 06:18:24] [Alarm System] Bedroom 1 state is - Open [2018-8-23 06:18:24] [Alarm System] Bedroom 1 state is - Close [2018-8-23 06:18:25] [Alarm System] Patio Door state is - Open [2018-8-23 06:18:25] [Alarm System] Patio Door state is - Close [2018-8-23 06:18:25] [Alarm System] Garage Door state is - Open [2018-8-23 06:18:25] [Alarm System] Garage Door state is - Close [2018-8-23 06:18:25] [Alarm System] Bedroom 1 state is - Open [2018-8-23 06:18:25] [Alarm System] Bedroom 1 state is - Close [2018-8-23 06:18:26] [Alarm System] Patio Door state is - Open [2018-8-23 06:18:26] [Alarm System] Patio Door state is - Close [2018-8-23 06:18:26] [Alarm System] Garage Door state is - Open [2018-8-23 06:18:26] [Alarm System] Garage Door state is - Close [2018-8-23 06:18:26] [Alarm System] Bedroom 1 state is - Open [2018-8-23 06:18:26] [Alarm System] Bedroom 1 state is - Close [2018-8-23 06:18:27] [Alarm System] Patio Door state is - Open [2018-8-23 06:18:27] [Alarm System] Patio Door state is - Close [2018-8-23 06:18:27] [Alarm System] Garage Door state is - Open [2018-8-23 06:18:27] [Alarm System] Garage Door state is - Close [2018-8-23 06:18:27] [Alarm System] Bedroom 1 state is - Open [2018-8-23 06:18:27] [Alarm System] Bedroom 1 state is - Close

I thought maybe it was a reception issue, so I dismantled the unit and upgraded both the WiFi and 433mhz antennas, and the beeping response emitted when I open and close any sensor, is faster now and works flawlessly with the Broadlink app, but in Homebridge it seems to be completely unreliable still.

rechin304 commented 6 years ago

Kung-Foo-Kamel i have same issue.

NexGen-3D-Printing commented 6 years ago

I'm thinking of ditching the whole system, anyone want 15 door sensors and a modified and enhabced base station cheap??

I just got an RFXCOM transceiver, I will set this up with generic 433 sensors and use Domoticz to control it all and then link it to Homebridge.

pazax commented 6 years ago

I had similar issue until yesterday when I found that two of three door sensors came in the same box interfered each other.

I used the word "interfere" because both seemed to function ok in the Broadlink app, but in Homebridge, one of them will work if I removed another from the app, doesn't matter which one.

I need 3 door sensors in my home, so I bought one more sensor separately. All three doors are now happily working.