search

nitroshift / wrt1900ac-v1-Mamba-bootloader-recovery-files

WRT1900AC corrupt bootloader recovery
13 stars 6 forks source link

./a.out -t /dev/ttyUSB1 -b u-boot-a38x-spi-uart.bin +xmodem: Protocol error #1

Open fangyushuma opened 7 years ago

fangyushuma commented 7 years ago

./a.out -t /dev/ttyUSB1 -b u-boot-a38x-spi-uart.bin Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 0 % [......................................................................] 1 % [......................................................................] 2 % [......................................................................] 3 % [......................................................................] 4 % [......................................................................] 5 % [......................................................................] 6 % [......................................................................] 7 % [......................................................................] 8 % [..................................................+xmodem: Protocol error root@fang-desktop:~/桌面/wrt1900ac-v1-Mamba-bootloader-recovery-files-master/kwb

nitroshift commented 7 years ago

You are using wrong files. Please read https://wiki.openwrt.org/toh/linksys/wrt_ac_series#tab__armada_xp3

fangyushuma commented 7 years ago

I was, in order to recover 1900 v2

fangyushuma commented 7 years ago

1900 v1 Working properly

fangyushuma commented 7 years ago

I suspect that my ttl has a problem, you must first boot, and then connected to ttl, otherwise the device can not boot