Assemble PCBWAY Order of 202407

nk25719 / PMD___aka-KiCad-esp32-6leds-2switches-1pj-circuit-

In this repo I am practicing KICAD. Created an ESP32 DevKit V1 module and a PCB footprint. I designed a circuit around this ESP32 consisting of six lamps, four switches, and two power jacks and added a voltage regulater to Vin to maintain a supply of +5V. (This project was originally made of two switches and 1 power jack and was named homeWork2.)

0 stars 2 forks source link

Assemble PCBWAY Order of 202407 #33

Closed ForrestErickson closed 1 month ago

ForrestErickson commented 3 months ago

Is your feature request related to a problem? Please describe. A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] Capture the out of box experience of receiving the PCBWAY Order of 202407 including finish assembly

Describe the solution you'd like A clear and concise description of what you want to happen. Capture of every step.

nk25719 commented 2 months ago

Journal of Assembly

The shipping package IMG_2596_2

Inside the Shipping Package

Wrapping of the PCBAs

Unwrapping of Assemblies

Unpacking Assemblies

Closer Look, Top View

Closer Look, Bottom View

Checking Assemply, Wrong pin spacing on DIP for ESP32

Containment of Pin Spacing

connected the ESP32 and Assembled the LEDs

nk25719 commented 1 month ago

Factory Test with Firmware

To verify the hardware assembly, several factory test codes were used:

Marching One and Marching Zero test codes were used to test the LEDs.
Switch functionality was successfully tested.
The power jack was tested and confirmed to be working.
The ESP32 was mounted on the board (the dimensions were not compatible, so the ESP32 legs were modified to fit).
The connectors for the LCD and DFPlayer were tested, with positive results.

Conclusion: The assembly is properly designed, and the PCB functions as expected.

Closing..