In this repo I am practicing KICAD. Created an ESP32 DevKit V1 module and a PCB footprint. I designed a circuit around this ESP32 consisting of six lamps, four switches, and two power jacks and added a voltage regulater to Vin to maintain a supply of +5V. (This project was originally made of two switches and 1 power jack and was named homeWork2.)
0
stars
1
forks
source link
Update Firmware, Factory Test FactoryTest_WW_WZ_BUTTONS to report Program Name and Version on Serial Port #46
Is your feature request related to a problem? Please describe.A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
The factory test firmware such as FactoryTest_WW_WZ_BUTTONS should report the program name and version on the serial port so that users can know if they are using the correct firmware.
Describe the solution you'd likeA clear and concise description of what you want to happen.
Is your feature request related to a problem? Please describe. A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] The factory test firmware such as FactoryTest_WW_WZ_BUTTONS should report the program name and version on the serial port so that users can know if they are using the correct firmware.
Describe the solution you'd like A clear and concise description of what you want to happen.
Look at the GPAD factory test code for some good practices https://github.com/PubInv/general-purpose-alarm-device/blob/main/Firmware/GPAD_Factory_Test/GPAD_Factory_Test.ino